LT3757AEMSE#PBF

{
  "slug": "lt3757aemse-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Controllers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "lt3757aemse#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3757aemse-pbf.kicad_sym",
    "lt3757aemse-pbf.kicad_mod",
    "lt3757aemse-pbf.glb",
    "lt3757aemse-pbf.step",
    "lt3757aemse-pbf.lbr",
    "docs/hero.png",
    "docs/lt3757aemse-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3757aemse-pbf-hero.glb",
    "lt3757aemse-pbf-hero.overlay.json",
    "lt3757aemse-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3757AEMSE#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10-EP",
    "pin_count": 11,
    "category": "Power Management ICs",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3757-3757a.pdf",
    "parts": {
      "symbol": "lt3757aemse-pbf.kicad_sym",
      "footprint": "lt3757aemse-pbf.kicad_mod",
      "model_3d": "lt3757aemse-pbf-hero.glb",
      "model_3d_plain": "lt3757aemse-pbf-etched.glb",
      "model_3d_step": "lt3757aemse-pbf-etched.step",
      "model_3d_step_plain": "lt3757aemse-pbf.step",
      "lbr": "lt3757aemse-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C671464",
      "digikey": "505-LT3757AEMSE#PBF-ND",
      "mouser": "584-LT3757AEMSE#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T12:40:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT3757AEMSE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3757AEMSE#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VC",
        "type": "passive",
        "description": "Error amplifier compensation pin used to stabilize the voltage loop with an external RC network."
      },
      {
        "number": "2",
        "name": "FBX",
        "type": "input",
        "description": "Positive and negative feedback pin receiving the output divider voltage (regulates to 1.6V or -0.8V, absolute max -6V to 6V), and modulates frequency during start-up and fault when close to GND."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin with 10µA (typical) pull-up to an internal 2.5V rail; an external capacitor sets the soft-start interval (absolute max 3V)."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "passive",
        "description": "Switching frequency adjustment pin; set frequency (50kHz to 1MHz) with a resistor to GND and do not leave open (absolute max 1.5V)."
      },
      {
        "number": "5",
        "name": "SYNC",
        "type": "input",
        "description": "Frequency synchronization input for an external clock with RT set 20% slower than the SYNC frequency; tie to GND if unused (absolute max 8V)."
      },
      {
        "number": "6",
        "name": "SENSE",
        "type": "input",
        "description": "Current sense input for the control loop, Kelvin connected to the positive terminal of the switch current sense resistor (absolute max ±0.3V, 110mV typical current limit threshold)."
      },
      {
        "number": "7",
        "name": "GATE",
        "type": "output",
        "description": "N-channel MOSFET gate driver output switching between INTVCC and GND, driven to GND in shutdown, thermal lockout or INTVCC UV/OV."
      },
      {
        "number": "8",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Regulated 7.2V (typical) supply for internal loads and gate driver, requires a minimum 4.7µF bypass capacitor and can be tied to VIN if VIN is below 17.5V."
      },
      {
        "number": "9",
        "name": "SHDN/UVLO",
        "type": "input",
        "description": "Shutdown and undervoltage detect pin with accurate 1.22V falling threshold and programmable hysteresis; tie to 0.4V or less to disable and reduce VIN quiescent current below 1µA."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin (2.9V to 40V operating range) that must be locally bypassed with a 0.22µF or larger capacitor close to the pin."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that also serves as the negative terminal of the current sense resistor and must be soldered directly to the local ground plane."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 8,
        "cost_usd": 0.1129,
        "at": "2026-10-31T12:40:09"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3757-3757a.pdf",
        "pages": 38,
        "sha256": "a50e40555a5ca7a0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3757aemse-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3757aemse-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ee03fe11e9b18b83d73f161700257b5af6989f7ca703dfb27e752e8b694fa5cc",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "MSE",
      "source_page": 36,
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3757aemse-pbf.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}