3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3750AEMS#TRPBF
Analog Devices · Interface - Specialized · MSOP-10
LT3750AEMS#TRPBF from Analog Devices, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VTRANS | power_in | Transformer supply pin powering the primary coil and boundary mode detection circuitry; bypass at the pin with a 1µF to 10µF capacitor (absolute maximum 24V, minimum 2.5V to 3V). |
| 2 | DONE | output | Open-collector indication pin that turns on an NPN when the target output voltage is reached or on a fault such as thermal shutdown or undervoltage lockout; requires a pull-up resistor or current source (absolute maximum 24V, ±1mA). |
| 3 | CHARGE | input | Starts a charge cycle when driven to 1.1V or higher and disables charging below 0.2V, requiring a step input with a minimum ramp rate of 1V/µs; GATE drives low within 200ns of CHARGE falling below the 50mV dynamic threshold (absolute maximum 24V). |
| 4 | VCC | power_in | Input supply pin, minimum 3V, absolute maximum 24V; bypass locally with a 1µF to 10µF ceramic capacitor. |
| 5 | GND | power_in | Ground pin; connect directly to the local ground plane. |
| 6 | SOURCE | input | Senses NMOS drain current via the NMOS source and current sense resistor, with a current limit of 78mV/RSENSE (absolute maximum 1V). |
| 7 | GATE | output | Gate driver output for the external NMOS, driving the gate voltage to within VCC - 2V each switching cycle (absolute maximum 24V). |
| 8 | RDCM | passive | Discontinuous mode sense pin that detects when transformer current has decayed to zero and starts a new charge cycle; connect a resistor (43k, 5% recommended) to the NMOS drain (current into pin ±1mA). |
| 9 | RVOUT | passive | Output voltage VI converter pin that develops a current proportional to the output capacitor voltage; connect a resistor to the NMOS drain (current into pin ±1mA). |
| 10 | RBG | input | Output voltage sense pin that senses the voltage across the RBG resistor, disabling charging and pulling DONE low when it reaches 1.24V; connect a resistor of 2.5k or less (2.49k, 1% recommended) to GND (absolute maximum 1.5V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-10 |
| Category | Interface |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum VCC | 2.8 | 3 | V | full temperature range | 2 | ||
| Minimum VTRANS | 2.5 | 3 | V | full temperature range | 2 | ||
| VCC Quiescent Current | 1.6 | 2.5 | mA | Not Switching, CHARGE = 5V | 2 | ||
| VCC Quiescent Current (shutdown) | 1 | µA | Not Switching, CHARGE = 0V | 2 | |||
| VTRANS Quiescent Current | 140 | 250 | µA | Not Switching, CHARGE = 5V | 2 | ||
| VTRANS Quiescent Current (shutdown) | 1 | µA | Not Switching, CHARGE = 0V | 2 | |||
| CHARGE Pin Enable Voltage | 0.87 | 1.1 | V | full temperature range | 2 | ||
| CHARGE Pin Disable Voltage DC Threshold | 0.2 | 0.6 | V | DC Threshold, full temperature range | 2 | ||
| CHARGE Pin Disable Voltage Dynamic Threshold | 30 | 60 | mV | Dynamic Threshold (Note 3) | 2 | ||
| VOUT Comparator Trip Voltage | 1.215 | 1.24 | 1.265 | V | Measured RBG Pin | 2 | |
| RBG Pin Bias Current | 70 | 500 | nA | RBG = 1.2V | 2 | ||
| DCM Comparator Trip Voltage | 5 | 36 | 80 | mV | Measured as VDRAIN, VTRANS, RDCM = 43k (Note 4) | 2 | |
| Current Limit Comparator Trip Voltage | 68 | 78 | 88 | mV | 2 | ||
| DONE Output Signal Low | 0.1 | 0.2 | V | 100kΩ to 5V | 2 | ||
| DONE Pin Leakage Current | 0.2 | µA | DONE = 2.5V | 2 | |||
| GATE High Voltage | 3 | 3.8 | 4.5 | V | CGATE = 1nF, VCC = 5V | 3 | |
| GATE High Voltage | 22 | 22.6 | 23.5 | V | CGATE = 1nF, VCC = 24V | 3 | |
| Supply/pin voltage (VCC, VTRANS, GATE, DONE, CHARGE) | 24 | V | 2 | ||||
| RBG pin voltage | RBG | 1.5 | V | 2 | |||
| SOURCE pin voltage | SOURCE | 1 | V | 2 | |||
| Current into RDCM Pin | -1 | 1 | mA | 2 | |||
| Current into RVOUT Pin | -1 | 1 | mA | 2 | |||
| Current into DONE Pin | -1 | 1 | mA | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | Note 2 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum junction temperature | TJMAX | 125 | °C | 2 | |||
| Thermal resistance junction to ambient | θJA | 160 | °C/W | 10-lead MSOP | 2 | ||
| CHARGE Pin Current | 24 | µA | CHARGE = 24V | 2 | |||
| CHARGE Pin Current | 19 | µA | CHARGE = 5V | 2 | |||
| CHARGE Pin Current | 1 | µA | CHARGE = 0V | 2 | |||
| Minimum CHARGE Pin Low Time | 20 | µs | High→Low→High | 2 | |||
| NMOS Minimum On Time | 0.6 | µs | 2 | ||||
| GATE Rise Time | 50 | ns | 3 | ||||
| GATE Turn Off Propagation Delay | 100 | ns | CGATE = 1nF | 3 |
CAD (KiCad official)
- Symbol:
LT3750AEMS#TRPBF - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
lt3750aems-trpbf-etched.step/lt3750aems-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3750aems-trpbf.step/lt3750aems-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
dc1d5b7724dc0fae, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).