main
Ray
Publish 0.1.0
bea655a
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367
{
"slug": "lt3669eufd-2",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices LIN Transceivers, QFN-28-EP(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip-uart-485-232",
"lt3669eufd-2#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3669eufd-2.kicad_sym",
"lt3669eufd-2.kicad_mod",
"lt3669eufd-2.glb",
"lt3669eufd-2.step",
"lt3669eufd-2.lbr",
"docs/hero.png",
"docs/lt3669eufd-2-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3669eufd-2-hero.glb",
"lt3669eufd-2-hero.overlay.json"
],
"component": {
"mpn": "LT3669EUFD-2",
"manufacturer": "Analog Devices",
"package": "QFN-28-EP(4x5)",
"pin_count": 29,
"category": "Communication Interface Chip/UART/485/232",
"subcategory": "LIN Transceivers",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3669fa.pdf",
"parts": {
"symbol": "lt3669eufd-2.kicad_sym",
"footprint": "lt3669eufd-2.kicad_mod",
"model_3d": "lt3669eufd-2-hero.glb",
"model_3d_plain": "lt3669eufd-2.glb",
"model_3d_step": "lt3669eufd-2-etched.step",
"model_3d_step_plain": "lt3669eufd-2.step",
"lbr": "lt3669eufd-2.lbr"
},
"distributor_links": {
"lcsc": "C671164",
"digikey": "LT3669EUFD-2#PBF-ND",
"mouser": "584-LT3669EUFD-2#PBF"
},
"distributor_check": {
"checked_at": "2026-11-12T20:03:39Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LT3669EUFD-2#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3669EUFD-2#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "SC1",
"type": "output",
"description": "CQ1 short-circuit detect open-collector output that pulls low on a CQ1 driver short or after thermal shutdown, and needs a 100k pull-up to the µC supply."
},
{
"number": "2",
"name": "SC2",
"type": "output",
"description": "Q2 short-circuit detect open-collector output that pulls low on a Q2 driver short or after thermal shutdown, and needs a 100k pull-up to the µC supply."
},
{
"number": "3",
"name": "WAKE",
"type": "output",
"description": "Wake-up detect open-collector output that pulls low when driver 1 detects a wake-up pulse longer than 75µs at CQ1, and needs a 10k pull-up to the µC supply."
},
{
"number": "4",
"name": "RXD1",
"type": "output",
"description": "CQ1 receiver open-collector output, inverted with respect to line data CQ1, that should use a pull-up of 10k or less for COM3 performance."
},
{
"number": "5",
"name": "TXEN1",
"type": "input",
"description": "CQ1 driver enable that enables the push-pull CQ1 driver when high, and in open-collector mode carries the data signal with TXD1 held high (pull-down) or low (pull-up)."
},
{
"number": "6",
"name": "TXD1",
"type": "input",
"description": "CQ1 driver input whose data polarity is inverted at the CQ1 driver output."
},
{
"number": "7",
"name": "TXEN2",
"type": "input",
"description": "Q2 driver enable that enables the push-pull Q2 driver when high, and in open-collector mode carries the data signal with TXD2 held high (pull-down) or low (pull-up)."
},
{
"number": "8",
"name": "TXD2",
"type": "input",
"description": "Q2 driver input whose data polarity is inverted at the Q2 driver output."
},
{
"number": "9",
"name": "Q2",
"type": "output",
"description": "Q2 line driver output, inverted with respect to TXD2, which should have a capacitor (typically 470pF) to ground for improved performance."
},
{
"number": "10",
"name": "CQ1",
"type": "bidirectional",
"description": "CQ1 driver output and receiver input tied directly to the industrial line data terminal, with a capacitor (typically 470pF) to ground recommended for improved performance."
},
{
"number": "11",
"name": "L+",
"type": "power_in",
"description": "Power supply input and anode of the internal reverse polarity protection diode, connected to the industrial line supply and bypassed locally with at least 4.7µF."
},
{
"number": "12",
"name": "EN/UVLO",
"type": "input",
"description": "Enable and undervoltage lockout pin that shuts the device down when pulled below 0.4V and sets a 1.5V UVLO threshold for the regulators and transceiver."
},
{
"number": "13",
"name": "DIO",
"type": "passive",
"description": "Cathode of the internal reverse polarity protection diode that must not have a bypass capacitor unless an external L+ to DIO diode is used."
},
{
"number": "14",
"name": "DA",
"type": "passive",
"description": "Diode anode for the LT3669-2 that connects to the anode of the external catch diode and lets internal circuitry sense catch diode current for frequency foldback in extreme situations."
},
{
"number": "15",
"name": "SW",
"type": "output",
"description": "Output of the internal NPN power switch that connects to the inductor and boost capacitor."
},
{
"number": "16",
"name": "BST",
"type": "passive",
"description": "Boost pin that supplies drive voltage above the input to the internal NPN switch and connects through a capacitor (typically 0.22µF) to SW."
},
{
"number": "17",
"name": "BD",
"type": "passive",
"description": "Boost diode connection to the integrated Schottky from BD to BST that connects to the switching regulator output."
},
{
"number": "18",
"name": "LDOIN",
"type": "power_in",
"description": "LDO power supply input that is the collector of the LDO power NPN and may be tied to the switching regulator output or DIO but not to L+."
},
{
"number": "19",
"name": "LDO",
"type": "power_out",
"description": "Low dropout linear regulator output that must be bypassed to GND with at least 1µF of capacitance."
},
{
"number": "20",
"name": "FBLDO",
"type": "input",
"description": "LDO feedback input that the device regulates to 0.794V, with a resistor divider tap setting the LDO output voltage."
},
{
"number": "21",
"name": "FBOUT",
"type": "input",
"description": "Switching regulator feedback input that the device regulates to 0.794V, with a resistor divider tap setting the switching regulator output voltage."
},
{
"number": "22",
"name": "RT",
"type": "passive",
"description": "Oscillator frequency programming pin where a resistor to AGND sets the switching frequency per Table 2."
},
{
"number": "23",
"name": "AGND",
"type": "power_in",
"description": "Analog ground for bandgap references that connects to the ground of the RT, FBOUT, FBLDO, ILIM and CPOR passive components in a star connection to system ground."
},
{
"number": "24",
"name": "SYNC",
"type": "input",
"description": "External clock synchronization input that is grounded for internal oscillator operation, or driven with a logic signal having pulse widths of at least 80ns."
},
{
"number": "25",
"name": "SR",
"type": "input",
"description": "Slew rate control pin that is set low for reduced EMI in COM1/COM2 mode and set high for edge times suitable for COM3."
},
{
"number": "26",
"name": "ILIM",
"type": "input",
"description": "Line driver current limit programming pin where a resistor to AGND sets the limit, and tying it to AGND gives a 140mA limit."
},
{
"number": "27",
"name": "CPOR",
"type": "passive",
"description": "Reset delay timer pin where a capacitor to AGND sets a reset delay of 0.125ms/nF."
},
{
"number": "28",
"name": "RST",
"type": "output",
"description": "Active low open-collector reset output that remains asserted for the CPOR-programmed delay after VOUT and VLDO rise above 92.7% of their set values."
},
{
"number": "29",
"name": "GND",
"type": "power_in",
"description": "Exposed pad ground that must be tied to the ground plane and the industrial line ground terminal and soldered to the PCB for proper operation."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet pin configuration shows two variants that differ only at pin 14: GND for LT3669 and DA; The package is the 28-lead 4mm x 5mm UFD plastic QFN with exposed pad at pin 29; the datasheet numbe; Pin types for open-collector outputs (SC1, SC2, WAKE, RXD1, RST) were mapped to KiCad output, and th"
],
"pages_sent": 8,
"cost_usd": 0.0781,
"at": "2026-11-12T20:03:25"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3669fa.pdf",
"pages": 40,
"sha256": "60300dd82eb00d53",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "QFN",
"height_mm": 0.75,
"height_basis": "datasheet A, nominal",
"standoff_mm": 0.0
},
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3669eufd-2.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.02,
5.02,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "deaa5f4a5ced6f79edf9d9edf1a38891ba25263fc68e6db400a65721a0f968db",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3669eufd-2-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.02,
5.02,
0.75
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "61bc0aee4c4e7fdcaf94e27db4ba2ab12372364b8d25c545b1971701aea6a6bb",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "UFD28",
"source_page": 38,
"D": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"E1": {
"nom_mm": 4.0,
"range_mm": [
3.9,
4.1
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
0.7,
0.8
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lt3669eufd-2.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}