main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3581ede-pbf: viewers · Ray
lt3581ede-pbf-etched.glb Publish 0.1.0 · Ray
lt3581ede-pbf-etched.step lt3581ede-pbf: factory component page (tier=mfr) · Ray
lt3581ede-pbf-hero.glb lt3581ede-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3581ede-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt3581ede-pbf.glb Publish 0.1.0 · Ray
lt3581ede-pbf.kicad_mod Publish 0.1.0 · Ray
lt3581ede-pbf.kicad_sym Publish 0.1.0 · Ray
lt3581ede-pbf.lbr Publish 0.1.0 · Ray
lt3581ede-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 15 pins · Ray

LT3581EDE#PBF

Analog Devices · DC-DC Converters · DFN-14(3x4)

LT3581EDE#PBF from Analog Devices, in a DFN-14(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Positive and negative feedback pin; tie a resistor from FB to VOUT, RFB = (VOUT - 1.215V)/83.3µA for boost/SEPIC or (
2 VC passive Error amplifier output pin where the external compensation network is tied.
3 GATE output PMOS gate drive pull-down current source for output short-circuit protection or output disconnect, with maximum pull-down current of 933µA at SS voltages above 500mV.
4 FAULT bidirectional Active-low bidirectional fault indication pin, pulled low (below 750mV) externally or internally to signal a fault, needs a pull-up above 1V for no-fault operation.
5 VIN power_in Input supply pin that must be locally bypassed.
6 SW1 passive Master switch pin, the collector of the internal master NPN power switch; minimize connected metal trace area to minimize EMI.
7 SW1 passive Master switch pin, the collector of the internal master NPN power switch; minimize connected metal trace area to minimize EMI.
8 SW2 passive Slave switch pin, the collector of the internal slave NPN power switch; minimize connected metal trace area to minimize EMI.
9 SW2 passive Slave switch pin, the collector of the internal slave NPN power switch; minimize connected metal trace area to minimize EMI.
10 CLKOUT output Clock output pin for synchronizing other regulators, also usable as a junction temperature monitor via duty cycle, and meant to drive capacitive loads up to 50pF only.
11 SHDN input Shutdown pin that works with the UVLO circuit; drive below 300mV to disable the chip and above 1.33V (typical) to enable it and restart soft-start; do not float.
12 RT passive Timing resistor pin; a resistor to ground sets the free-running switching frequency; do not float.
13 SS passive Soft-start pin for a soft-start capacitor, charged by a nominal 250k resistor to about 2.1V on start-up and used in the fault timeout sequence.
14 SYNC input Synchronization input; drive with a clock whose high level exceeds 1.3V and low level is below 0.4V, or drive below 0.4V to revert to the internal free-running clock.
15 GND power_in Exposed pad ground that must be soldered directly to the local ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-14(3x4)
Category Power Supply Chip
Pins 15

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage 2.3 2.5 V 3
VIN Overvoltage Lockout 22.1 23.5 25 V 3
Positive Feedback Voltage 1.195 1.215 1.23 V 3
Negative Feedback Voltage 3 9 16 mV 3
Positive FB Pin Bias Current 81 83.3 85 µA VFB = Positive Feedback Voltage, Current into Pin 3
Negative FB Pin Bias Current 81 83.3 85.5 µA VFB = Negative Feedback Voltage, Current out of Pin 3
Quiescent Current Not Switching 1.9 2.3 mA Not Switching 3
Quiescent Current in Shutdown 0 1 µA VSHDN = 0V 3
Reference Line Regulation 0.01 0.05 %/V 2.5V ≤ VIN ≤ 20V 3
Switching Frequency, fOSC (RT = 34k) fOSC 2.25 2.5 2.75 MHz RT = 34k 3
Switching Frequency, fOSC (RT = 432k) fOSC 180 200 220 kHz RT = 432k 3
Switching Frequency Range 200 2500 kHz Free-Running or Synchronizing 3
SYNC High Level for Synchronization 1.3 V 3
SYNC Low Level for Synchronization 0.4 V 3
SYNC Clock Pulse Duty Cycle 20 80 % VSYNC = 0V to 2V 3
SW1 Current Limit 1.9 2.4 3 A At All Duty Cycles 3
SW1 + SW2 Current Limit 3.3 4.3 5.4 A At All Duty Cycles, SW2/SW1 = 78% (Note 3) 3
SW1 Leakage Current 0.01 1 µA VSW1 = 5V 3
SW2 Leakage Current 0.01 1 µA VSW2 = 5V 3
Soft-Start Charge Current 5.7 8.7 11.3 µA VSS = 30mV, Current Flows Out of SS pin 4
Soft-Start Discharge Current 5.7 8.7 11.3 µA Part in FAULT, VSS = 2.1V, Current Flows into SS Pin 4
Soft-Start High Detection Voltage 1.65 1.8 1.95 V Part in FAULT 4
Soft-Start Low Detection Voltage 30 50 85 mV Part Exiting FAULT 4
SHDN Minimum Input Voltage High 1.27 1.33 1.41 V Active Mode, SHDN Rising (LT3581E, LT3581I) 4
SHDN Minimum Input Voltage Low (falling threshold) 1.24 1.3 1.38 V Active Mode, SHDN Falling (LT3581E, LT3581I, LT3581H) 4
SHDN Input Voltage Low 0.3 V Shutdown Mode 4
SHDN Pin Bias Current 9.7 11.4 13.4 µA VSHDN = 3V 4
CLKOUT Output Voltage High 1.9 2.1 2.3 V CCLKOUT = 50pF 4
CLKOUT Output Voltage Low 5 200 mV CCLKOUT = 50pF 4
GATE Pull Down Current 800 933 1100 µA VGATE = 3V (LT3581E, LT3581I) 4
GATE Leakage Current 0.01 1 µA VGATE = 50V, GATE Off 4
FAULT Output Voltage Low 100 300 mV 50μA into FAULT Pin (LT3581E, LT3581I) 4
FAULT Leakage Current 0.01 1 µA VFAULT = 40V, FAULT Off 4
FAULT Input Voltage Low 700 750 800 mV 4
FAULT Input Voltage High 950 1000 1050 mV 4
Operating Junction Temperature Range (LT3581E) TJ -40 125 °C LT3581E (Notes 2, 4) 2
VIN Voltage VIN -0.3 40 V 2
SW1/SW2 Voltage -0.4 42 V 2
RT Voltage -0.3 5 V 2
SS, FB Voltage -0.3 2.5 V 2
VC Voltage -0.3 2 V 2
SHDN Voltage -0.3 40 V 2
SYNC Voltage -0.3 5.5 V 2
GATE Voltage -0.3 80 V 2
FAULT Voltage -0.3 40 V 2
FAULT Current -500 500 µA 2
CLKOUT Voltage -0.3 3 V 2
CLKOUT Current 1 mA 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature (TJMAX) TJMAX 125 °C DE14 package 2
Thermal Resistance, Junction to Ambient (θJA) θJA 43 °C/W DE14 package 2
Thermal Resistance, Junction to Case (θJC) θJC 4.3 °C/W DE14 package 2

CAD (KiCad official)

  • Symbol: LT3581EDE#PBF
  • Footprint: Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
  • 3D model: DFN-14(3x4) (KiCad packages3D, STEP)
  • 3D model files: lt3581ede-pbf-etched.step / lt3581ede-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3581ede-pbf.step / lt3581ede-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (36 pp, sha256 c32042c990c741ab, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF