main
Ray
Publish 0.1.1
791cb61
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265
{
"slug": "lt3573emse-pbf",
"version": "0.1.1",
"type": "component",
"description": "Analog Devices DC-DC Converters, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lt3573emse#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3573emse-pbf.kicad_sym",
"lt3573emse-pbf.kicad_mod",
"lt3573emse-pbf.glb",
"lt3573emse-pbf.step",
"lt3573emse-pbf.lbr",
"docs/hero.png",
"docs/lt3573emse-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3573emse-pbf-hero.glb",
"lt3573emse-pbf-hero.overlay.json",
"lt3573emse-pbf-etched.glb",
"lt3573emse-pbf-etched.step"
],
"component": {
"mpn": "LT3573EMSE#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-16-EP",
"pin_count": 17,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3573fd.pdf",
"parts": {
"symbol": "lt3573emse-pbf.kicad_sym",
"footprint": "lt3573emse-pbf.kicad_mod",
"model_3d": "lt3573emse-pbf-hero.glb",
"model_3d_plain": "lt3573emse-pbf.glb",
"model_3d_step": "lt3573emse-pbf-etched.step",
"model_3d_step_plain": "lt3573emse-pbf.step",
"lbr": "lt3573emse-pbf.lbr"
},
"distributor_links": {
"lcsc": "C670930",
"digikey": "505-LT3573EMSE#PBF-ND",
"mouser": "584-LT3573EMSE#PBF"
},
"distributor_check": {
"checked_at": "2026-10-30T21:11:52Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT3573EMSE#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3573EMSE#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "2",
"name": "TEST",
"type": "input",
"description": "Used for testing purposes only and must be connected to ground for the part to operate properly."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "4",
"name": "SW",
"type": "passive",
"description": "Collector node of the 60V-rated output switch carrying large currents; keep traces to switching components short to minimize EMI and voltage spikes."
},
{
"number": "5",
"name": "VIN",
"type": "power_in",
"description": "Input voltage pin (3V to 40V) supplying the internal start-up circuitry and reference for the DCM comparator and feedback; must be locally bypassed with a capacitor."
},
{
"number": "6",
"name": "BIAS",
"type": "power_in",
"description": "Bias voltage pin supplying the switch driver and internal circuitry (about 3V at 30mA); must be locally bypassed, and may be tied to VIN if no third winding is used and VIN ≤ 15V."
},
{
"number": "7",
"name": "SHDN/UVLO",
"type": "input",
"description": "Shutdown/undervoltage lockout; a resistor divider from VIN programs the minimum operating input voltage, with a 1.22V rising threshold and 2.5µA hysteresis current, and the part draws no quiescent current below ~0.7V."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "10",
"name": "SS",
"type": "passive",
"description": "Soft-start pin; a capacitor here limits start-up inrush current and output ramp rate, with switching starting when the pin reaches ~0.7V."
},
{
"number": "11",
"name": "RILIM",
"type": "passive",
"description": "Maximum current limit adjust pin; a resistor to ground sets the current limit, with 10k used for the full switch current capability."
},
{
"number": "12",
"name": "VC",
"type": "passive",
"description": "Compensation pin for the internal error amplifier; connect a series RC to ground, with a 100pF capacitor in parallel to reduce noise."
},
{
"number": "13",
"name": "RFB",
"type": "input",
"description": "Input for the external feedback resistor connected to the transformer primary (VSW), with about 200µA average current during the flyback period; connect to VIN for nonisolated applications."
},
{
"number": "14",
"name": "RREF",
"type": "input",
"description": "Input for the external ground-referred reference resistor, nominally in the range of 6k; its ratio to the RFB resistor sets the output voltage."
},
{
"number": "15",
"name": "TC",
"type": "passive",
"description": "Output voltage temperature compensation; a resistor to ground produces a PTAT current sourced into the RREF node, ITC = 0.55V/RTC."
},
{
"number": "16",
"name": "GND",
"type": "power_in",
"description": "Ground pin."
},
{
"number": "17",
"name": "EP",
"type": "power_in",
"description": "Exposed pad is ground and must be soldered to the board for electrical and thermal contact, well connected with many vias to an internal ground plane."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin-configuration diagram text is flattened, so the pin-number-to-name mapping was inferred from; Pin types for SW, SS, RILIM, VC and TC are my judgment (passive) because the datasheet gives no elec",
"5/17 pins cited to the wrong page (name found elsewhere): ['11:RILIM@p5', '13:RFB@p5', '14:RREF@p5', '16:GND@p5']"
],
"pages_sent": 14,
"cost_usd": 0.047,
"at": "2026-10-30T21:11:44"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3573fd.pdf",
"pages": 26,
"sha256": "ee559765f86c2d71",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3573emse-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3573emse-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
4.039,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "cf997b49ed886faa0094a29829d392707f49bcbe14ffdb853660f38ec9310b6e",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"title": "LT3573EMSE#PBF",
"brief": "Analog Devices DC-DC Converters, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"metadata": {
"specs": {
"Manufacturer": "Analog Devices",
"Package": "MSOP-16-EP",
"Category": "Power Supply Chip",
"Pins": "17"
}
},
"discovery_triggers": [
"lt3573emse#pbf"
],
"discovery_pitch": "LT3573EMSE#PBF (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"visibility": "public"
}