Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT3573EMSE#PBF

Analog Devices · DC-DC Converters · MSOP-16-EP

LT3573EMSE#PBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground pin.
2 TEST input Used for testing purposes only and must be connected to ground for the part to operate properly.
3 GND power_in Ground pin.
4 SW passive Collector node of the 60V-rated output switch carrying large currents; keep traces to switching components short to minimize EMI and voltage spikes.
5 VIN power_in Input voltage pin (3V to 40V) supplying the internal start-up circuitry and reference for the DCM comparator and feedback; must be locally bypassed with a capacitor.
6 BIAS power_in Bias voltage pin supplying the switch driver and internal circuitry (about 3V at 30mA); must be locally bypassed, and may be tied to VIN if no third winding is used and VIN ≤ 15V.
7 SHDN/UVLO input Shutdown/undervoltage lockout; a resistor divider from VIN programs the minimum operating input voltage, with a 1.22V rising threshold and 2.5µA hysteresis current, and the part draws no quiescent current below ~0.7V.
8 GND power_in Ground pin.
9 GND power_in Ground pin.
10 SS passive Soft-start pin; a capacitor here limits start-up inrush current and output ramp rate, with switching starting when the pin reaches ~0.7V.
11 RILIM passive Maximum current limit adjust pin; a resistor to ground sets the current limit, with 10k used for the full switch current capability.
12 VC passive Compensation pin for the internal error amplifier; connect a series RC to ground, with a 100pF capacitor in parallel to reduce noise.
13 RFB input Input for the external feedback resistor connected to the transformer primary (VSW), with about 200µA average current during the flyback period; connect to VIN for nonisolated applications.
14 RREF input Input for the external ground-referred reference resistor, nominally in the range of 6k; its ratio to the RFB resistor sets the output voltage.
15 TC passive Output voltage temperature compensation; a resistor to ground produces a PTAT current sourced into the RREF node, ITC = 0.55V/RTC.
16 GND power_in Ground pin.
17 EP power_in Exposed pad is ground and must be soldered to the board for electrical and thermal contact, well connected with many vias to an internal ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-16-EP
Category Power Supply Chip
Pins 17

CAD (KiCad official)

  • Symbol: LT3573EMSE#PBF
  • Footprint: Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
  • 3D model: MSOP-16-EP (KiCad packages3D, STEP)
  • 3D model files: lt3573emse-pbf-etched.step / lt3573emse-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3573emse-pbf.step / lt3573emse-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (26 pp, sha256 ee559765f86c2d71, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF