main
Ray
Publish 0.1.0
5890f8a
LT3573EMSE#PBF
Analog Devices · DC-DC Converters · MSOP-16-EP
LT3573EMSE#PBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | TEST | input | Used for testing purposes only and must be connected to ground for the part to operate properly. |
| 3 | GND | power_in | Ground pin. |
| 4 | SW | passive | Collector node of the 60V-rated output switch carrying large currents; keep traces to switching components short to minimize EMI and voltage spikes. |
| 5 | VIN | power_in | Input voltage pin (3V to 40V) supplying the internal start-up circuitry and reference for the DCM comparator and feedback; must be locally bypassed with a capacitor. |
| 6 | BIAS | power_in | Bias voltage pin supplying the switch driver and internal circuitry (about 3V at 30mA); must be locally bypassed, and may be tied to VIN if no third winding is used and VIN ≤ 15V. |
| 7 | SHDN/UVLO | input | Shutdown/undervoltage lockout; a resistor divider from VIN programs the minimum operating input voltage, with a 1.22V rising threshold and 2.5µA hysteresis current, and the part draws no quiescent current below ~0.7V. |
| 8 | GND | power_in | Ground pin. |
| 9 | GND | power_in | Ground pin. |
| 10 | SS | passive | Soft-start pin; a capacitor here limits start-up inrush current and output ramp rate, with switching starting when the pin reaches ~0.7V. |
| 11 | RILIM | passive | Maximum current limit adjust pin; a resistor to ground sets the current limit, with 10k used for the full switch current capability. |
| 12 | VC | passive | Compensation pin for the internal error amplifier; connect a series RC to ground, with a 100pF capacitor in parallel to reduce noise. |
| 13 | RFB | input | Input for the external feedback resistor connected to the transformer primary (VSW), with about 200µA average current during the flyback period; connect to VIN for nonisolated applications. |
| 14 | RREF | input | Input for the external ground-referred reference resistor, nominally in the range of 6k; its ratio to the RFB resistor sets the output voltage. |
| 15 | TC | passive | Output voltage temperature compensation; a resistor to ground produces a PTAT current sourced into the RREF node, ITC = 0.55V/RTC. |
| 16 | GND | power_in | Ground pin. |
| 17 | EP | power_in | Exposed pad is ground and must be soldered to the board for electrical and thermal contact, well connected with many vias to an internal ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
LT3573EMSE#PBF - Footprint:
Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm - 3D model: MSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
lt3573emse-pbf-etched.step/lt3573emse-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3573emse-pbf.step/lt3573emse-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (26 pp, sha256
ee559765f86c2d71, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT3573EMSE#PBF
**Analog Devices** · DC-DC Converters · MSOP-16-EP
LT3573EMSE#PBF from Analog Devices, in a MSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin. |
| 2 | TEST | input | Used for testing purposes only and must be connected to ground for the part to operate properly. |
| 3 | GND | power_in | Ground pin. |
| 4 | SW | passive | Collector node of the 60V-rated output switch carrying large currents; keep traces to switching components short to minimize EMI and voltage spikes. |
| 5 | VIN | power_in | Input voltage pin (3V to 40V) supplying the internal start-up circuitry and reference for the DCM comparator and feedback; must be locally bypassed with a capacitor. |
| 6 | BIAS | power_in | Bias voltage pin supplying the switch driver and internal circuitry (about 3V at 30mA); must be locally bypassed, and may be tied to VIN if no third winding is used and VIN ≤ 15V. |
| 7 | SHDN/UVLO | input | Shutdown/undervoltage lockout; a resistor divider from VIN programs the minimum operating input voltage, with a 1.22V rising threshold and 2.5µA hysteresis current, and the part draws no quiescent current below ~0.7V. |
| 8 | GND | power_in | Ground pin. |
| 9 | GND | power_in | Ground pin. |
| 10 | SS | passive | Soft-start pin; a capacitor here limits start-up inrush current and output ramp rate, with switching starting when the pin reaches ~0.7V. |
| 11 | RILIM | passive | Maximum current limit adjust pin; a resistor to ground sets the current limit, with 10k used for the full switch current capability. |
| 12 | VC | passive | Compensation pin for the internal error amplifier; connect a series RC to ground, with a 100pF capacitor in parallel to reduce noise. |
| 13 | RFB | input | Input for the external feedback resistor connected to the transformer primary (VSW), with about 200µA average current during the flyback period; connect to VIN for nonisolated applications. |
| 14 | RREF | input | Input for the external ground-referred reference resistor, nominally in the range of 6k; its ratio to the RFB resistor sets the output voltage. |
| 15 | TC | passive | Output voltage temperature compensation; a resistor to ground produces a PTAT current sourced into the RREF node, ITC = 0.55V/RTC. |
| 16 | GND | power_in | Ground pin. |
| 17 | EP | power_in | Exposed pad is ground and must be soldered to the board for electrical and thermal contact, well connected with many vias to an internal ground plane. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
## CAD (KiCad official)
- Symbol: `LT3573EMSE#PBF`
- Footprint: `Package_SO:MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm`
- 3D model: MSOP-16-EP (KiCad packages3D, STEP)
- 3D model files: `lt3573emse-pbf-etched.step` / `lt3573emse-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3573emse-pbf.step` / `lt3573emse-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/3573fd.pdf) (26 pp, sha256 `ee559765f86c2d71`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt3573emse-pbf-datasheet.pdf)