main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3571eud-trpbf: viewers · Ray
lt3571eud-trpbf-etched.glb Publish 0.1.0 · Ray
lt3571eud-trpbf-etched.step lt3571eud-trpbf: factory component page (tier=mfr) · Ray
lt3571eud-trpbf-hero.glb lt3571eud-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3571eud-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt3571eud-trpbf.glb Publish 0.1.0 · Ray
lt3571eud-trpbf.kicad_mod Publish 0.1.0 · Ray
lt3571eud-trpbf.kicad_sym Publish 0.1.0 · Ray
lt3571eud-trpbf.lbr Publish 0.1.0 · Ray
lt3571eud-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 17 pins · Ray

LT3571EUD#TRPBF

Analog Devices · DC-DC Converters · QFN-16-EP(3x3)

LT3571EUD#TRPBF from Analog Devices, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect pin; leave unconnected.
2 APD passive APD cathode connection, rated 75V absolute maximum, with a 0.1μF capacitor recommended at this pin to suppress switching noise.
3 MONIN power_in Current monitor supply and inverting input of the current sense amplifier, rated 75V absolute maximum; a sense resistor between MONIN and VOUT sets the output current limit as 200mV/RSENSE, and MONIN connects directly to VOUT if that limit is not used.
4 VOUT power_out Boost converter output, rated 75V absolute maximum, with a capacitor placed between this pin and the GND plane and also serving as the noninverting input of the current sense amplifier.
5 SW output Switch pin, rated 75V absolute maximum; keep the trace length short to reduce EMI.
6 SW output Switch pin, rated 75V absolute maximum; keep the trace length short to reduce EMI.
7 GND power_in Ground, internally connected to pin 10; connect both GND pins to board ground for best performance.
8 SYNC input Frequency synchronization input with input low 0.4V maximum and input high 1.5V minimum (absolute maximum 5V); tie to ground if the feature is unused.
9 RT input Switching frequency programming pin, set by a resistor to GND (1.5V absolute maximum); do not leave this pin open.
10 GND power_in Ground, internally connected to pin 7; connect both GND pins to board ground for best performance.
11 VIN power_in Input supply pin with operating range 2.7V to 20V (20V absolute maximum); must be locally bypassed.
12 SHDN input Shutdown pin; tie to 1.5V or higher to enable the device and 0.4V or less to disable it, with an RC filter providing soft-start (20V absolute maximum).
13 VREF power_out Reference output that can supply up to 100μA, with pin voltage 1.200V to 1.240V at IREF = -100μA; do not overdrive, and bypass with a 10nF or larger capacitor (1.5V absolute maximum).
14 CTRL input Internal reference override pin that lets FB be adjusted between 0V and 1V; tie it higher than 1.2V to use the internal 1V reference (5V absolute maximum).
15 FB input Feedback pin connected to the output resistor divider tap (5V absolute maximum).
16 MON output Current monitor output that sources 20% of the APD current and converts it to a voltage through an external resistor; it is internally clamped to 11.5V (12V absolute maximum).
17 GND power_in Ground exposed pad on the package bottom that must be soldered to the PCB.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package QFN-16-EP(3x3)
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage (VIN), SHDN VIN 20 V 2
VOUT, MONIN, APD Voltage VOUT, MONIN, APD 75 V 2
MON Voltage MON 12 V 2
SW Voltage SW 75 V 2
CTRL, FB, SYNC Voltage CTRL, FB, SYNC 5 V 2
RT, VREF Voltage RT, VREF 1.5 V 2
Operating Ambient Temperature Range TA -40 125 °C Note 2 2
Operating Junction Temperature TJ -40 125 °C Note 2 2
Storage Temperature Range TSTG -65 150 °C 2
Maximum Junction Temperature TJMAX 125 °C 2
Junction-to-ambient thermal resistance θJA 68 °C/W 2
Junction-to-case thermal resistance θJC 4.2 °C/W 2
Minimum Operating Voltage VIN 2.7 V 2
Maximum Operating Voltage VIN 20 V 2
Supply Current 1.7 2.2 mA VFB = 1.3V, Not Switching 2
Supply Current (shutdown) 0.1 0.5 μA VSHDN = 0V 2
Feedback Voltage VFB 0.985 1 1.015 V VCTRL = 1.25V, VOUT = VMONIN 2
Feedback Voltage (wider temperature row) VFB 0.97 1 1.03 V VCTRL = 1.25V, VOUT = VMONIN 2
Feedback Line Regulation 0.03 0.07 %/V 2.7V < VIN < 20V 2
Current Sense Voltage (VOUT, VMONIN) 185 200 215 mV VOUT = 30V 2
FB Pin Bias Current IFB 60 100 nA VFB = 0V 2
VREF Pin Voltage VREF 1.2 1.222 1.24 V IREF = -100μA 2
VREF Pin Line Regulation VREF 0.03 0.07 %V 2.7V < VIN < 20V 2
RT Voltage RT 1 V 2
SYNC Resistance to GND RSYNC 45 kΩ VSYNC = 2V 2
SYNC Input Low VSYNC 0.4 V 2
SYNC Input High VSYNC 1.5 V 2
Switching Frequency fSW 0.85 1 1.15 MHz RT = 12.1k 3
Switching Frequency fSW 1.7 2 2.3 MHz RT = 4.22k 3
Switching Frequency fSW 210 250 280 kHz RT = 56.2k 3
Maximum Duty Cycle DMAX 95 97 % RT = 56.2k (250kHz) 3
Maximum Duty Cycle DMAX 92 96 % SYNC = 300kHz Clock Signal, RT = 56.2k 3
Maximum Duty Cycle DMAX 85 90 % RT = 12.1k (1MHz) 3
Maximum Duty Cycle DMAX 75 80 % RT = 4.22k (2MHz) 3
Switch Current Limit ILIM 370 470 570 mA 3
Switch VCESAT VCESAT 240 mV ISW = 200mA 3
Switch Leakage Current ISW 2 μA VSW = 75V 3
Schottky Forward Voltage VF 850 mV ISCHOTTKY = 200mA 3
Schottky Reverse Leakage IR 5 μA VOUT, VSW = 75V 3
SHDN Voltage High VSHDN 1.5 V 3
SHDN Voltage Low VSHDN 0.4 V 3
SHDN Pin Bias Current ISHDN 50 65 μA 3
CTRL to FB Offset -5 5 15 mV VCTRL = 0.5V 3
CTRL to FB Offset (wider temperature row) -10 5 20 mV VCTRL = 0.5V 3
CTRL Input Bias Current ICTRL 20 100 nA Current Out of Pin, VCTRL = 0.5V 3
APD Current Monitor Gain 0.185 0.2 0.215 250nA ≤ IAPD < 10μA, 10V < VMONIN < 75V 3
APD Current Monitor Gain 0.194 0.2 0.206 10μA ≤ IAPD ≤ 2.5mA, 20V < VMONIN < 75V 3
Monitor Output Voltage Clamp 11.5 V 3
APD Monitor Voltage Drop VMONIN, VAPD 4.8 5 5.2 V IAPD = 1mA 3
MONIN Pin Current Limit 30 mA VMONIN = 40V, VAPD = 0V 3

CAD (KiCad official)

  • Symbol: LT3571EUD#TRPBF
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lt3571eud-trpbf-etched.step / lt3571eud-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3571eud-trpbf.step / lt3571eud-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 df815c25cbca4b1b, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF