main
Ray Publish 0.1.0 19e00cb
{
  "slug": "lt3508euf-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, QFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3508euf#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3508euf-pbf.kicad_sym",
    "lt3508euf-pbf.kicad_mod",
    "lt3508euf-pbf.glb",
    "lt3508euf-pbf.step",
    "lt3508euf-pbf.lbr",
    "docs/hero.png",
    "docs/lt3508euf-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3508euf-pbf-hero.glb",
    "lt3508euf-pbf-hero.overlay.json",
    "lt3508euf-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3508EUF#PBF",
    "manufacturer": "Analog Devices",
    "package": "QFN-24-EP(4x4)",
    "pin_count": 25,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3508fd.pdf",
    "parts": {
      "symbol": "lt3508euf-pbf.kicad_sym",
      "footprint": "lt3508euf-pbf.kicad_mod",
      "model_3d": "lt3508euf-pbf-hero.glb",
      "model_3d_plain": "lt3508euf-pbf-etched.glb",
      "model_3d_step": "lt3508euf-pbf-etched.step",
      "model_3d_step_plain": "lt3508euf-pbf.step",
      "lbr": "lt3508euf-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C670836",
      "digikey": "LT3508EUF#PBF-ND",
      "mouser": "584-LT3508EUF#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T22:37:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3508EUF#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3508EUF#PBF",
        "status": "found",
        "lifecycle": "Restricted Availability"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB1",
        "type": "input",
        "description": "Channel 1 feedback pin regulated to 0.800V; connect the feedback resistor divider tap here."
      },
      {
        "number": "2",
        "name": "TRACK/SS1",
        "type": "input",
        "description": "Channel 1 soft-start/tracking input with 1.2µA internal soft-start current charging a capacitor, or a resistor divider from a tracked output."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "7",
        "name": "BOOST1",
        "type": "power_in",
        "description": "Channel 1 boost drive supply for the internal NPN switch, higher than the input voltage; tie through a diode to a 2.8V or higher supply, max 60V and 30V above SW."
      },
      {
        "number": "8",
        "name": "SW1",
        "type": "output",
        "description": "Channel 1 internal power switch output; connect to the inductor, catch diode and boost capacitor."
      },
      {
        "number": "9",
        "name": "VIN1",
        "type": "power_in",
        "description": "Supplies internal circuitry and the channel 1 power switch, must be locally bypassed and be greater than 3.7V for either channel to operate."
      },
      {
        "number": "10",
        "name": "VIN2",
        "type": "power_in",
        "description": "Supplies the channel 2 power switch, must be locally bypassed and be greater than 3V (with VIN1 above 3.7V); connect to VIN1 unless powered from a different source."
      },
      {
        "number": "11",
        "name": "SW2",
        "type": "output",
        "description": "Channel 2 internal power switch output; connect to the inductor, catch diode and boost capacitor."
      },
      {
        "number": "12",
        "name": "BOOST2",
        "type": "power_in",
        "description": "Channel 2 boost drive supply for the internal NPN switch, higher than the input voltage; tie through a diode to a 2.8V or higher supply, max 60V and 30V above SW."
      },
      {
        "number": "13",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "14",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; tie directly to the exposed pad and ground plane."
      },
      {
        "number": "17",
        "name": "TRACK/SS2",
        "type": "input",
        "description": "Channel 2 soft-start/tracking input with 1.2µA internal soft-start current charging a capacitor, or a resistor divider from a tracked output."
      },
      {
        "number": "18",
        "name": "FB2",
        "type": "input",
        "description": "Channel 2 feedback pin regulated to 0.800V; connect the feedback resistor divider tap here."
      },
      {
        "number": "19",
        "name": "VC2",
        "type": "bidirectional",
        "description": "Channel 2 error amplifier output that sets peak switch current and is used for loop compensation; pull to ground with an open drain to shut down channel 2."
      },
      {
        "number": "20",
        "name": "PG2",
        "type": "output",
        "description": "Channel 2 open-collector power good output that stays low until FB is within 10% of final regulation; valid when VIN1 is above 3.7V and SHDN is high, may be left unconnected."
      },
      {
        "number": "21",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown pin: below 0.3V shuts down the part, 2.63V threshold acts as accurate UVLO, and it must not be driven more than 6V above VIN1."
      },
      {
        "number": "22",
        "name": "RT/SYNC",
        "type": "input",
        "description": "Sets the oscillator frequency with a resistor to GND (33.2k for 1MHz) or accepts a logic-level sync signal with pulse widths of at least 80ns."
      },
      {
        "number": "23",
        "name": "PG1",
        "type": "output",
        "description": "Channel 1 open-collector power good output that stays low until FB is within 10% of final regulation; valid when VIN1 is above 3.7V and SHDN is high, may be left unconnected."
      },
      {
        "number": "24",
        "name": "VC1",
        "type": "bidirectional",
        "description": "Channel 1 error amplifier output that sets peak switch current and is used for loop compensation; pull to ground with an open drain to shut down channel 1."
      },
      {
        "number": "25",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad is ground and thermal contact to the PCB and must be soldered to the circuit board for proper operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The UF24 pin-number drawing on page 2 is garbled in the extracted text, so the mapping of names to n; Pin 25 is the exposed pad (GND) and is not one of the 24 numbered leads; it is included as GND power; BOOST1/BOOST2 are typed power_in and SW1/SW2 output, and the TRACK/SS and VC pins passive. The datas",
          "12/25 pins cited to the wrong page (name found elsewhere): ['9:GND@p6', '11:GND@p6', '13:PG1@p6', '14:RT/SYNC@p6']"
        ],
        "pages_sent": 9,
        "cost_usd": 0.3318,
        "at": "2026-10-28T22:36:51"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3508fd.pdf",
        "pages": 26,
        "sha256": "a86fb7df90de95ef",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3508euf-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3508euf-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1db3ca396ca38d95a8536784ef1db247b6460d87506e1122d5540056a8080d63",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "UF24",
      "source_page": 24,
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          null,
          null
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3508euf-pbf.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}