main
Ray Publish 0.1.0 0688e7a
{
  "slug": "lt3502aems-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3502aems#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3502aems-pbf.kicad_sym",
    "lt3502aems-pbf.kicad_mod",
    "lt3502aems-pbf.glb",
    "lt3502aems-pbf.step",
    "lt3502aems-pbf.lbr",
    "docs/hero.png",
    "docs/lt3502aems-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3502aems-pbf-hero.glb",
    "lt3502aems-pbf-hero.overlay.json",
    "lt3502aems-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3502AEMS#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3502fd.pdf",
    "parts": {
      "symbol": "lt3502aems-pbf.kicad_sym",
      "footprint": "lt3502aems-pbf.kicad_mod",
      "model_3d": "lt3502aems-pbf-hero.glb",
      "model_3d_plain": "lt3502aems-pbf-etched.glb",
      "model_3d_step": "lt3502aems-pbf-etched.step",
      "model_3d_step_plain": "lt3502aems-pbf.step",
      "lbr": "lt3502aems-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C580086",
      "digikey": "LT3502AEMS#PBF-ND",
      "mouser": "584-LT3502AEMS#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T01:47:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3502AEMS#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3502AEMS#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SW",
        "type": "output",
        "description": "SW is the output of the internal power switch and connects to the inductor, catch diode and boost capacitor."
      },
      {
        "number": "2",
        "name": "BOOST",
        "type": "power_out",
        "description": "BOOST supplies a drive voltage higher than VIN to the internal NPN power switch, with a boost capacitor connected from this pin to SW; the datasheet limits BOOST to 50V absolute maximum and 7V above the SW pin."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin; the datasheet marks it NC and gives no function or electrical limit for it."
      },
      {
        "number": "4",
        "name": "DA",
        "type": "input",
        "description": "DA connects to the anode of the catch diode (D1) and provides frequency foldback in extreme situations; DA pin current to stop the oscillator is 500mA minimum and 650mA typical."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the regulator."
      },
      {
        "number": "6",
        "name": "SHDN",
        "type": "input",
        "description": "SHDN shuts the device down when tied to ground, must be tied to 2V or more for normal operation, must not be higher than VIN, and has a 40V absolute maximum rating; it also provides soft-start and frequency foldback."
      },
      {
        "number": "7",
        "name": "FB",
        "type": "input",
        "description": "FB is regulated to 0.8V and receives the feedback divider tap, with VOUT = 0.8 × (1 + R1/R2) and a recommended R2 of 10kΩ; the absolute maximum FB voltage is 6V."
      },
      {
        "number": "8",
        "name": "BD",
        "type": "power_in",
        "description": "BD supplies current to the internal boost Schottky diode, with an absolute maximum BD voltage of 7V."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin; the datasheet marks it NC and gives no function or electrical limit for it."
      },
      {
        "number": "10",
        "name": "VIN",
        "type": "power_in",
        "description": "VIN supplies current to the internal regulator and power switch and must be locally bypassed; the absolute maximum input voltage is 40V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists pins 3 and 9 as NC in the MSOP pin configuration but gives no function in Pin Fu; The Pin Functions section gives pin numbers as DFN/MS pairs; the MSOP numbers were taken from the se"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0339,
        "at": "2026-10-29T01:47:11"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3502fd.pdf",
        "pages": 24,
        "sha256": "ee1026fdeba3ecdd",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3502aems-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3502aems-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f160ba551d0be01be45a99b112b49b8bba36b2070bdf67e88141195658182405",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "MS",
      "source_page": 23,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3502aems-pbf.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}