main
Ray
Publish 0.1.0
e51e71b
LT3493IDCB#TRPBF
Analog Devices · DC-DC Converters · DFN-6-EP(2x3)
LT3493IDCB#TRPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | The feedback pin regulates to 780mV, with output set by VOUT = 0.78V · (1 + R1/R2) and a good R2 value of 10k. |
| 2 | GND | power_in | Ground return pin that must tie to a local ground plane below the LT3493 and the feedback divider returns to this pin. |
| 3 | BOOST | power_in | Provides a drive voltage higher than the input voltage to the internal NPN power switch, with a BOOST pin voltage maximum of 50V and a maximum of 25V above the SW pin. |
| 4 | SW | output | Output of the internal power switch, which connects to the inductor, catch diode and boost capacitor. |
| 5 | VIN | power_in | Supplies the internal regulator and power switch over a 3.6V to 36V operating range with 40V maximum, and must be locally bypassed. |
| 6 | SHDN | input | Shutdown control pin that must be tied to ground to shut down the regulator and to 2.3V or more for normal operation, with a 40V maximum pin rating. |
| 7 | EP | power_in | Exposed pad is electrically GND and must be soldered to the PCB with a large ground plane and thermal vias. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x3) |
| Category | Power Supply Chip |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 765 | 780 | 795 | mV | 2 | |
| Undervoltage Lockout | UVLO | 3.1 | 3.4 | 3.6 | V | 2 | |
| VIN Operating Range | VIN | 3.6 | 36 | V | 2 | ||
| FB Pin Bias Current | IFB | 50 | 150 | nA | VFB = Measured VREF + 10mV (Note 4) | 2 | |
| Quiescent Current | IQ | 1.9 | 2.5 | mA | Not Switching | 2 | |
| Quiescent Current in Shutdown | IQ | 0.01 | 2 | μA | VSHDN = 0V | 2 | |
| Reference Line Regulation | 0.007 | %/V | VIN = 5V to 36V | 2 | |||
| Switching Frequency | fSW | 685 | 750 | 815 | kHz | VFB = 0.7V | 2 |
| Switching Frequency (foldback) | fSW | 36 | kHz | VFB = 0V | 2 | ||
| Maximum Duty Cycle | DCMAX | 88 | % | l (full operating temperature range) | 2 | ||
| Maximum Duty Cycle | DCMAX | 91 | 95 | % | TA = 25°C | 2 | |
| Switch Current Limit | ILIM | 1.4 | 1.75 | 2.2 | A | Note 3 | 3 |
| Switch VCESAT | VCESAT | 330 | mV | ISW = 1A | 3 | ||
| Switch Leakage Current | 2 | μA | 3 | ||||
| Minimum Boost Voltage Above Switch | VBOOST-VSW | 1.85 | 2.2 | V | ISW = 1A | 3 | |
| BOOST Pin Current | IBOOST | 30 | 50 | mA | ISW = 1A | 3 | |
| SHDN Input Voltage High | VSHDN | 2.3 | V | 3 | |||
| SHDN Input Voltage Low | VSHDN | 0.3 | V | 3 | |||
| SHDN Bias Current | ISHDN | 6 | 15 | μA | VSHDN = 2.3V (Note 5) | 3 | |
| SHDN Bias Current | ISHDN | 0.01 | 0.1 | μA | VSHDN = 0V | 3 | |
| Input Voltage (VIN) | VIN | 40 | V | 2 | |||
| BOOST Pin Voltage | VBOOST | 50 | V | 2 | |||
| BOOST Pin Above SW Pin | VBOOST-VSW | 25 | V | 2 | |||
| SHDN Pin Voltage | VSHDN | 40 | V | 2 | |||
| FB Voltage | VFB | 6 | V | 2 | |||
| Operating Temperature Range | TOP | -40 | 125 | °C | LT3493I | 2 | |
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance, Junction to Ambient | θJA | 64 | °C/W | DCB package | 2 |
CAD (KiCad official)
- Symbol:
LT3493IDCB#TRPBF - Footprint:
Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm - 3D model: DFN-6-EP(2x3) (KiCad packages3D, STEP)
- 3D model files:
lt3493idcb-trpbf-etched.step/lt3493idcb-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3493idcb-trpbf.step/lt3493idcb-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
220deb6b1cdc7c2f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT3493IDCB#TRPBF
**Analog Devices** · DC-DC Converters · DFN-6-EP(2x3)
LT3493IDCB#TRPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | The feedback pin regulates to 780mV, with output set by VOUT = 0.78V · (1 + R1/R2) and a good R2 value of 10k. |
| 2 | GND | power_in | Ground return pin that must tie to a local ground plane below the LT3493 and the feedback divider returns to this pin. |
| 3 | BOOST | power_in | Provides a drive voltage higher than the input voltage to the internal NPN power switch, with a BOOST pin voltage maximum of 50V and a maximum of 25V above the SW pin. |
| 4 | SW | output | Output of the internal power switch, which connects to the inductor, catch diode and boost capacitor. |
| 5 | VIN | power_in | Supplies the internal regulator and power switch over a 3.6V to 36V operating range with 40V maximum, and must be locally bypassed. |
| 6 | SHDN | input | Shutdown control pin that must be tied to ground to shut down the regulator and to 2.3V or more for normal operation, with a 40V maximum pin rating. |
| 7 | EP | power_in | Exposed pad is electrically GND and must be soldered to the PCB with a large ground plane and thermal vias. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x3) |
| Category | Power Supply Chip |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 765 | 780 | 795 | mV | | 2 |
| Undervoltage Lockout | UVLO | 3.1 | 3.4 | 3.6 | V | | 2 |
| VIN Operating Range | VIN | 3.6 | | 36 | V | | 2 |
| FB Pin Bias Current | IFB | | 50 | 150 | nA | VFB = Measured VREF + 10mV (Note 4) | 2 |
| Quiescent Current | IQ | | 1.9 | 2.5 | mA | Not Switching | 2 |
| Quiescent Current in Shutdown | IQ | | 0.01 | 2 | μA | VSHDN = 0V | 2 |
| Reference Line Regulation | | | 0.007 | | %/V | VIN = 5V to 36V | 2 |
| Switching Frequency | fSW | 685 | 750 | 815 | kHz | VFB = 0.7V | 2 |
| Switching Frequency (foldback) | fSW | | 36 | | kHz | VFB = 0V | 2 |
| Maximum Duty Cycle | DCMAX | 88 | | | % | l (full operating temperature range) | 2 |
| Maximum Duty Cycle | DCMAX | | 91 | 95 | % | TA = 25°C | 2 |
| Switch Current Limit | ILIM | 1.4 | 1.75 | 2.2 | A | Note 3 | 3 |
| Switch VCESAT | VCESAT | | | 330 | mV | ISW = 1A | 3 |
| Switch Leakage Current | | | | 2 | μA | | 3 |
| Minimum Boost Voltage Above Switch | VBOOST-VSW | 1.85 | | 2.2 | V | ISW = 1A | 3 |
| BOOST Pin Current | IBOOST | | 30 | 50 | mA | ISW = 1A | 3 |
| SHDN Input Voltage High | VSHDN | 2.3 | | | V | | 3 |
| SHDN Input Voltage Low | VSHDN | | | 0.3 | V | | 3 |
| SHDN Bias Current | ISHDN | | 6 | 15 | μA | VSHDN = 2.3V (Note 5) | 3 |
| SHDN Bias Current | ISHDN | | 0.01 | 0.1 | μA | VSHDN = 0V | 3 |
| Input Voltage (VIN) | VIN | | | 40 | V | | 2 |
| BOOST Pin Voltage | VBOOST | | | 50 | V | | 2 |
| BOOST Pin Above SW Pin | VBOOST-VSW | | | 25 | V | | 2 |
| SHDN Pin Voltage | VSHDN | | | 40 | V | | 2 |
| FB Voltage | VFB | | | 6 | V | | 2 |
| Operating Temperature Range | TOP | -40 | | 125 | °C | LT3493I | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Thermal Resistance, Junction to Ambient | θJA | | 64 | | °C/W | DCB package | 2 |
## CAD (KiCad official)
- Symbol: `LT3493IDCB#TRPBF`
- Footprint: `Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm`
- 3D model: DFN-6-EP(2x3) (KiCad packages3D, STEP)
- 3D model files: `lt3493idcb-trpbf-etched.step` / `lt3493idcb-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3493idcb-trpbf.step` / `lt3493idcb-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/3493fb.pdf) (20 pp, sha256 `220deb6b1cdc7c2f`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt3493idcb-trpbf-datasheet.pdf)