main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3493idcb-trpbf: viewers · Ray
lt3493idcb-trpbf-etched.glb Publish 0.1.0 · Ray
lt3493idcb-trpbf-etched.step lt3493idcb-trpbf: factory component page (tier=mfr) · Ray
lt3493idcb-trpbf-hero.glb lt3493idcb-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3493idcb-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt3493idcb-trpbf.glb Publish 0.1.0 · Ray
lt3493idcb-trpbf.kicad_mod Publish 0.1.0 · Ray
lt3493idcb-trpbf.kicad_sym Publish 0.1.0 · Ray
lt3493idcb-trpbf.lbr Publish 0.1.0 · Ray
lt3493idcb-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 7 pins · Ray

LT3493IDCB#TRPBF

Analog Devices · DC-DC Converters · DFN-6-EP(2x3)

LT3493IDCB#TRPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input The feedback pin regulates to 780mV, with output set by VOUT = 0.78V · (1 + R1/R2) and a good R2 value of 10k.
2 GND power_in Ground return pin that must tie to a local ground plane below the LT3493 and the feedback divider returns to this pin.
3 BOOST power_in Provides a drive voltage higher than the input voltage to the internal NPN power switch, with a BOOST pin voltage maximum of 50V and a maximum of 25V above the SW pin.
4 SW output Output of the internal power switch, which connects to the inductor, catch diode and boost capacitor.
5 VIN power_in Supplies the internal regulator and power switch over a 3.6V to 36V operating range with 40V maximum, and must be locally bypassed.
6 SHDN input Shutdown control pin that must be tied to ground to shut down the regulator and to 2.3V or more for normal operation, with a 40V maximum pin rating.
7 EP power_in Exposed pad is electrically GND and must be soldered to the PCB with a large ground plane and thermal vias.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-6-EP(2x3)
Category Power Supply Chip
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage VFB 765 780 795 mV 2
Undervoltage Lockout UVLO 3.1 3.4 3.6 V 2
VIN Operating Range VIN 3.6 36 V 2
FB Pin Bias Current IFB 50 150 nA VFB = Measured VREF + 10mV (Note 4) 2
Quiescent Current IQ 1.9 2.5 mA Not Switching 2
Quiescent Current in Shutdown IQ 0.01 2 μA VSHDN = 0V 2
Reference Line Regulation 0.007 %/V VIN = 5V to 36V 2
Switching Frequency fSW 685 750 815 kHz VFB = 0.7V 2
Switching Frequency (foldback) fSW 36 kHz VFB = 0V 2
Maximum Duty Cycle DCMAX 88 % l (full operating temperature range) 2
Maximum Duty Cycle DCMAX 91 95 % TA = 25°C 2
Switch Current Limit ILIM 1.4 1.75 2.2 A Note 3 3
Switch VCESAT VCESAT 330 mV ISW = 1A 3
Switch Leakage Current 2 μA 3
Minimum Boost Voltage Above Switch VBOOST-VSW 1.85 2.2 V ISW = 1A 3
BOOST Pin Current IBOOST 30 50 mA ISW = 1A 3
SHDN Input Voltage High VSHDN 2.3 V 3
SHDN Input Voltage Low VSHDN 0.3 V 3
SHDN Bias Current ISHDN 6 15 μA VSHDN = 2.3V (Note 5) 3
SHDN Bias Current ISHDN 0.01 0.1 μA VSHDN = 0V 3
Input Voltage (VIN) VIN 40 V 2
BOOST Pin Voltage VBOOST 50 V 2
BOOST Pin Above SW Pin VBOOST-VSW 25 V 2
SHDN Pin Voltage VSHDN 40 V 2
FB Voltage VFB 6 V 2
Operating Temperature Range TOP -40 125 °C LT3493I 2
Maximum Junction Temperature TJMAX 125 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance, Junction to Ambient θJA 64 °C/W DCB package 2

CAD (KiCad official)

  • Symbol: LT3493IDCB#TRPBF
  • Footprint: Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm
  • 3D model: DFN-6-EP(2x3) (KiCad packages3D, STEP)
  • 3D model files: lt3493idcb-trpbf-etched.step / lt3493idcb-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3493idcb-trpbf.step / lt3493idcb-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 220deb6b1cdc7c2f, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF