main
Ray
Publish 0.1.0
23a4546
LT3489EMS8E#TRPBF
Analog Devices · DC-DC Converters · MSOP-8-EP
LT3489EMS8E#TRPBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VC | output | Error amplifier output pin; tie the external compensation network to this pin, or short it to the COMP pin to use the internal compensation network. |
| 2 | FB | input | Feedback pin with a 1.235V reference, where the resistive divider tap connects and VOUT = 1.235 • (1 + R1/R2), with trace area kept minimal and current into FB limited to ±1mA absolute maximum. |
| 3 | SHDN | input | Shutdown pin that must be tied to 2V or more to enable the device, grounded to shut down, never left floating, and rated to a 16V maximum. |
| 4 | GND | power_in | Ground pin that must be tied directly to the local ground plane. |
| 5 | SW | output | Switch pin, the collector of the internal NPN power switch, rated from -0.4V to 40V, with its connected metal trace minimized to reduce EMI. |
| 6 | VIN | power_in | Input supply pin with an operating range of 2.6V to 16V that must be locally bypassed. |
| 7 | COMP | passive | Internal compensation pin that connects to the VC pin for internal compensation and is tied to GND if not in use. |
| 8 | SS | passive | Soft-start pin where 10µA of current charges the external capacitor to 1.8V at start-up, with a larger capacitor giving slower start-up and the pin left floating if not in use. |
| 9 | EXPOSED PAD | power_in | Exposed pad is ground and must be soldered to the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 1.22 | 1.235 | 1.26 | V | 2 | |
| Feedback Voltage (full operating temperature range) | VFB | 1.21 | 1.26 | V | ● full operating temperature range | 2 | |
| Minimum Operating Voltage | 2.4 | 2.6 | V | 2 | |||
| Maximum Operating Voltage | 16 | V | 2 | ||||
| Switching Frequency | fSW | 1.8 | 2 | 2.2 | MHz | ● full operating temperature range | 2 |
| Maximum Switch Duty Cycle | 85 | 90 | % | ● full operating temperature range | 2 | ||
| Switch Current Limit | ILIM | 2.5 | 3.5 | 5 | A | ● Note 4 | 2 |
| Switch VCESAT | VCESAT | 0.23 | V | ISW = 2A | 2 | ||
| Switch Leakage Current | 0.01 | 1 | μA | VSW = 5V | 2 | ||
| FB Pin Bias Current | IFB | 100 | 250 | nA | VFB = 1.25V (Note 3), ● full operating temperature range | 2 | |
| Error Amp Transconductance | gm | 100 | μmhos | ΔI = 10μA | 2 | ||
| Error Amp Voltage Gain | 80 | V/V | 2 | ||||
| Quiescent Current | IQ | 2 | 4 | mA | VSHDN = 2.5V, Not Switching | 2 | |
| Quiescent Current in Shutdown | IQ(SHDN) | 0 | 1 | μA | VSHDN = 0V, VIN = 3V | 2 | |
| Reference Line Regulation | 0.01 | 0.05 | % | 2.6V ≤ VIN ≤ 16V | 2 | ||
| SHDN Pin Current | ISHDN | 100 | μA | VSHDN = 5V | 2 | ||
| SHDN Pin Current | ISHDN | 20 | μA | VSHDN = 1.4V | 2 | ||
| SHDN Pin Current | ISHDN | 2 | μA | VSHDN = 0V | 2 | ||
| SHDN Pin Threshold | 0.3 | 1.5 | 2 | V | 2 | ||
| Soft-Start Charging Current | ISS | 5 | 10 | 20 | μA | VSS = 0.5V | 2 |
| VIN Voltage | VIN | 16 | V | 2 | |||
| SW Voltage | VSW | -0.4 | 40 | V | 2 | ||
| FB, VC, COMP, SS Voltages | 6 | V | 2 | ||||
| SHDN Voltage | VSHDN | 16 | V | 2 | |||
| Current Into FB Pin | IFB | -1 | 1 | mA | 2 | ||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | Note 2 | 2 | |
| Operating Temperature Range (LT3489E guaranteed performance) | TA | 0 | 70 | °C | LT3489E guaranteed to meet performance specifications (Note 2) | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering) | 300 | °C | 10 sec | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 40 | °C/W | 2 | |||
| Thermal Resistance Junction-to-Case | θJC | 10 | °C/W | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | Trace Area at Pin 1 (VC) and Pin 2 (FB). Use Multiple Vias to Tie Pin 4 Copper to Ground Plane. Use Vias at One Location Only to | 7 |
CAD (KiCad official)
- Symbol:
LT3489EMS8E#TRPBF - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lt3489ems8e-trpbf-etched.step/lt3489ems8e-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3489ems8e-trpbf.step/lt3489ems8e-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
cc8b78dba258f600, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT3489EMS8E#TRPBF
**Analog Devices** · DC-DC Converters · MSOP-8-EP
LT3489EMS8E#TRPBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VC | output | Error amplifier output pin; tie the external compensation network to this pin, or short it to the COMP pin to use the internal compensation network. |
| 2 | FB | input | Feedback pin with a 1.235V reference, where the resistive divider tap connects and VOUT = 1.235 • (1 + R1/R2), with trace area kept minimal and current into FB limited to ±1mA absolute maximum. |
| 3 | SHDN | input | Shutdown pin that must be tied to 2V or more to enable the device, grounded to shut down, never left floating, and rated to a 16V maximum. |
| 4 | GND | power_in | Ground pin that must be tied directly to the local ground plane. |
| 5 | SW | output | Switch pin, the collector of the internal NPN power switch, rated from -0.4V to 40V, with its connected metal trace minimized to reduce EMI. |
| 6 | VIN | power_in | Input supply pin with an operating range of 2.6V to 16V that must be locally bypassed. |
| 7 | COMP | passive | Internal compensation pin that connects to the VC pin for internal compensation and is tied to GND if not in use. |
| 8 | SS | passive | Soft-start pin where 10µA of current charges the external capacitor to 1.8V at start-up, with a larger capacitor giving slower start-up and the pin left floating if not in use. |
| 9 | EXPOSED PAD | power_in | Exposed pad is ground and must be soldered to the PCB. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Power Supply Chip |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 1.22 | 1.235 | 1.26 | V | | 2 |
| Feedback Voltage (full operating temperature range) | VFB | 1.21 | | 1.26 | V | ● full operating temperature range | 2 |
| Minimum Operating Voltage | | 2.4 | 2.6 | | V | | 2 |
| Maximum Operating Voltage | | | | 16 | V | | 2 |
| Switching Frequency | fSW | 1.8 | 2 | 2.2 | MHz | ● full operating temperature range | 2 |
| Maximum Switch Duty Cycle | | 85 | 90 | | % | ● full operating temperature range | 2 |
| Switch Current Limit | ILIM | 2.5 | 3.5 | 5 | A | ● Note 4 | 2 |
| Switch VCESAT | VCESAT | | 0.23 | | V | ISW = 2A | 2 |
| Switch Leakage Current | | | 0.01 | 1 | μA | VSW = 5V | 2 |
| FB Pin Bias Current | IFB | | 100 | 250 | nA | VFB = 1.25V (Note 3), ● full operating temperature range | 2 |
| Error Amp Transconductance | gm | | 100 | | μmhos | ΔI = 10μA | 2 |
| Error Amp Voltage Gain | | | 80 | | V/V | | 2 |
| Quiescent Current | IQ | | 2 | 4 | mA | VSHDN = 2.5V, Not Switching | 2 |
| Quiescent Current in Shutdown | IQ(SHDN) | | 0 | 1 | μA | VSHDN = 0V, VIN = 3V | 2 |
| Reference Line Regulation | | | 0.01 | 0.05 | % | 2.6V ≤ VIN ≤ 16V | 2 |
| SHDN Pin Current | ISHDN | | 100 | | μA | VSHDN = 5V | 2 |
| SHDN Pin Current | ISHDN | | 20 | | μA | VSHDN = 1.4V | 2 |
| SHDN Pin Current | ISHDN | | 2 | | μA | VSHDN = 0V | 2 |
| SHDN Pin Threshold | | 0.3 | 1.5 | 2 | V | | 2 |
| Soft-Start Charging Current | ISS | 5 | 10 | 20 | μA | VSS = 0.5V | 2 |
| VIN Voltage | VIN | | | 16 | V | | 2 |
| SW Voltage | VSW | -0.4 | | 40 | V | | 2 |
| FB, VC, COMP, SS Voltages | | | | 6 | V | | 2 |
| SHDN Voltage | VSHDN | | | 16 | V | | 2 |
| Current Into FB Pin | IFB | -1 | | 1 | mA | | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | | 2 |
| Operating Temperature Range | TA | -40 | | 85 | °C | Note 2 | 2 |
| Operating Temperature Range (LT3489E guaranteed performance) | TA | 0 | | 70 | °C | LT3489E guaranteed to meet performance specifications (Note 2) | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering) | | | | 300 | °C | 10 sec | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 40 | | °C/W | | 2 |
| Thermal Resistance Junction-to-Case | θJC | | 10 | | °C/W | | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | Copper | | Trace Area at Pin 1 (VC) and Pin 2 (FB). Use Multiple Vias to Tie Pin 4 Copper to Ground Plane. Use Vias at One Location Only to | 7 |
## CAD (KiCad official)
- Symbol: `LT3489EMS8E#TRPBF`
- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`
- 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lt3489ems8e-trpbf-etched.step` / `lt3489ems8e-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3489ems8e-trpbf.step` / `lt3489ems8e-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/3489f.pdf) (12 pp, sha256 `cc8b78dba258f600`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt3489ems8e-trpbf-datasheet.pdf)