Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT3489EMS8E#TRPBF

Analog Devices · DC-DC Converters · MSOP-8-EP

LT3489EMS8E#TRPBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VC output Error amplifier output pin; tie the external compensation network to this pin, or short it to the COMP pin to use the internal compensation network.
2 FB input Feedback pin with a 1.235V reference, where the resistive divider tap connects and VOUT = 1.235 • (1 + R1/R2), with trace area kept minimal and current into FB limited to ±1mA absolute maximum.
3 SHDN input Shutdown pin that must be tied to 2V or more to enable the device, grounded to shut down, never left floating, and rated to a 16V maximum.
4 GND power_in Ground pin that must be tied directly to the local ground plane.
5 SW output Switch pin, the collector of the internal NPN power switch, rated from -0.4V to 40V, with its connected metal trace minimized to reduce EMI.
6 VIN power_in Input supply pin with an operating range of 2.6V to 16V that must be locally bypassed.
7 COMP passive Internal compensation pin that connects to the VC pin for internal compensation and is tied to GND if not in use.
8 SS passive Soft-start pin where 10µA of current charges the external capacitor to 1.8V at start-up, with a larger capacitor giving slower start-up and the pin left floating if not in use.
9 EXPOSED PAD power_in Exposed pad is ground and must be soldered to the PCB.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage VFB 1.22 1.235 1.26 V 2
Feedback Voltage (full operating temperature range) VFB 1.21 1.26 V ● full operating temperature range 2
Minimum Operating Voltage 2.4 2.6 V 2
Maximum Operating Voltage 16 V 2
Switching Frequency fSW 1.8 2 2.2 MHz ● full operating temperature range 2
Maximum Switch Duty Cycle 85 90 % ● full operating temperature range 2
Switch Current Limit ILIM 2.5 3.5 5 A ● Note 4 2
Switch VCESAT VCESAT 0.23 V ISW = 2A 2
Switch Leakage Current 0.01 1 μA VSW = 5V 2
FB Pin Bias Current IFB 100 250 nA VFB = 1.25V (Note 3), ● full operating temperature range 2
Error Amp Transconductance gm 100 μmhos ΔI = 10μA 2
Error Amp Voltage Gain 80 V/V 2
Quiescent Current IQ 2 4 mA VSHDN = 2.5V, Not Switching 2
Quiescent Current in Shutdown IQ(SHDN) 0 1 μA VSHDN = 0V, VIN = 3V 2
Reference Line Regulation 0.01 0.05 % 2.6V ≤ VIN ≤ 16V 2
SHDN Pin Current ISHDN 100 μA VSHDN = 5V 2
SHDN Pin Current ISHDN 20 μA VSHDN = 1.4V 2
SHDN Pin Current ISHDN 2 μA VSHDN = 0V 2
SHDN Pin Threshold 0.3 1.5 2 V 2
Soft-Start Charging Current ISS 5 10 20 μA VSS = 0.5V 2
VIN Voltage VIN 16 V 2
SW Voltage VSW -0.4 40 V 2
FB, VC, COMP, SS Voltages 6 V 2
SHDN Voltage VSHDN 16 V 2
Current Into FB Pin IFB -1 1 mA 2
Maximum Junction Temperature TJMAX 125 °C 2
Operating Temperature Range TA -40 85 °C Note 2 2
Operating Temperature Range (LT3489E guaranteed performance) TA 0 70 °C LT3489E guaranteed to meet performance specifications (Note 2) 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (Soldering) 300 °C 10 sec 2
Thermal Resistance Junction-to-Ambient θJA 40 °C/W 2
Thermal Resistance Junction-to-Case θJC 10 °C/W 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts Copper Trace Area at Pin 1 (VC) and Pin 2 (FB). Use Multiple Vias to Tie Pin 4 Copper to Ground Plane. Use Vias at One Location Only to 7

CAD (KiCad official)

  • Symbol: LT3489EMS8E#TRPBF
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lt3489ems8e-trpbf-etched.step / lt3489ems8e-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3489ems8e-trpbf.step / lt3489ems8e-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 cc8b78dba258f600, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF