main
Ray Publish 0.1.0 7551125
{
  "slug": "lt3472edd-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3472edd#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3472edd-pbf.kicad_sym",
    "lt3472edd-pbf.kicad_mod",
    "lt3472edd-pbf.glb",
    "lt3472edd-pbf.step",
    "lt3472edd-pbf.lbr",
    "docs/hero.png",
    "docs/lt3472edd-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3472edd-pbf-hero.glb",
    "lt3472edd-pbf-hero.overlay.json",
    "lt3472edd-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3472EDD#PBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3472f.pdf",
    "parts": {
      "symbol": "lt3472edd-pbf.kicad_sym",
      "footprint": "lt3472edd-pbf.kicad_mod",
      "model_3d": "lt3472edd-pbf-hero.glb",
      "model_3d_plain": "lt3472edd-pbf-etched.glb",
      "model_3d_step": "lt3472edd-pbf-etched.step",
      "model_3d_step_plain": "lt3472edd-pbf.step",
      "lbr": "lt3472edd-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C580071",
      "digikey": "505-LT3472EDD#PBF-ND",
      "mouser": "584-LT3472EDD#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:57:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT3472EDD#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3472EDD#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SWP",
        "type": "output",
        "description": "Switch pin for the positive (boost) channel; connect the boost inductor here."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin that must be locally bypassed with an X5R or X7R type ceramic capacitor; the operating input range is 2.2V to 16V."
      },
      {
        "number": "3",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown pin that must be connected to 0.8V or higher to enable the device and 0.3V or less to disable it."
      },
      {
        "number": "4",
        "name": "SWN",
        "type": "output",
        "description": "Switch pin for the negative (inverter) channel; connect the inverter input inductor and flying capacitor here."
      },
      {
        "number": "5",
        "name": "DN",
        "type": "passive",
        "description": "Anode of the internal Schottky diode for the inverter; connect the inverter output inductor and flying capacitor here."
      },
      {
        "number": "6",
        "name": "FBN",
        "type": "input",
        "description": "Inverter feedback pin; connect feedback resistor R2 from this pin to VO2 with VO2 = 1.25 • R2/50k, and the pin is at 0V when regulated."
      },
      {
        "number": "7",
        "name": "SSN",
        "type": "passive",
        "description": "Inverter soft-start pin, internally connected to 1.25V through a 50k resistor; a capacitor to ground programs the ramp, and leaving it open or pulling it above 1.25V gives a quick start."
      },
      {
        "number": "8",
        "name": "FBP",
        "type": "input",
        "description": "Boost feedback pin; connect feedback resistor R1 from this pin to VO1 with VO1 = 1.25 • (1 + R1/50k), and the pin is at 1.25V when regulated."
      },
      {
        "number": "9",
        "name": "SSP",
        "type": "passive",
        "description": "Boost soft-start pin, internally connected to 1.25V through a 50k resistor; a capacitor to ground programs the ramp, and leaving it open or pulling it above 1.25V gives a quick start."
      },
      {
        "number": "10",
        "name": "VPOS",
        "type": "power_out",
        "description": "Boost output pin; connect the boost output capacitor here, with the switch and output nodes rated to 36V maximum."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground pin that must be tied to the ground plane through multiple vias under the package and soldered to the PCB for thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 12,
        "cost_usd": 0.0174,
        "at": "2026-10-28T16:57:46"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3472f.pdf",
        "pages": 12,
        "sha256": "c9419d0f587a0a49",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3472edd-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3472edd-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a4fea841fd240f66a6ee437be796104083d608f3f4bfb621faddd7ed27673498",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}