main
Ray lt3469ets8-trpbf: specified limits as data (metadata.characteristics, 49 rows from the datasheet) 7b52876

LT3469ETS8#TRPBF

Analog Devices · Special Purpose Amplifiers · TSOT-23-8

LT3469ETS8#TRPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Output of the gm amplifier requiring minimum 5nF capacitive load in gain-of-10 configuration and supporting maximum 300nF capacitive load.
2 FB input Feedback pin with 1.23V nominal reference voltage for connection of feedback resistor divider.
3 VIN power_in Input supply pin rated 2.5V to 16V maximum voltage, must be locally bypassed.
4 GND power_in Ground pin, connect directly to local ground plane.
5 SW output Switch pin rated 40V maximum, connect inductor here and minimize trace area to reduce EMI.
6 VCC power_out Output of internal switching regulator and supply rail for gm amplifier, rated 38V maximum, requires minimum 0.22µF capacitance.
7 +IN input Noninverting input terminal of the gm amplifier with input common mode range 0V to 10V.
8 -IN input Inverting input terminal of the gm amplifier with input common mode range 0V to 10V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage 3 10 mV VOUT = VCC/2, ● full operating temperature range 2
Input Offset Current 10 100 nA ● full operating temperature range 2
Input Bias Current 150 500 nA ● full operating temperature range 2
Common Mode Rejection Ratio 70 100 dB VCM = 0V to 10V 2
Power Supply Rejection Ratio—VIN 80 120 dB VIN = 2.5V to 16V 2
Power Supply Rejection Ratio—VCC 65 85 dB VCC = 15V to 35V 2
Gain 15 30 V/mV No Load, VOUT = 2V to 33V 2
Gain 10 20 V/mV RL = 200k, VOUT = 2V to 33V 2
Transconductance 160 220 260 µA/mV IOUT = ±100µA 2
Transconductance 140 300 µA/mV ● full operating temperature range 2
Maximum Output Current 30 40 55 mA VOUT = VCC/2 2
Maximum Output Current 23 58 mA ● full operating temperature range 2
Maximum Output Voltage, Sourcing 34 34.5 V VCC = 35V, IOUT = 10mA 2
Maximum Output Voltage, Sourcing 34.5 34.9 V VCC = 35V, IOUT = 0mA 2
Minimum Output Voltage, Sinking 200 1000 mV IOUT = –10mA 2
Minimum Output Voltage, Sinking 10 500 mV IOUT = 0mA 2
Supply Current—VCC 1.5 2 2.5 mA VCC = 35V 2
Minimum Operating Voltage 2.5 V 2
Maximum Operating Voltage 16 V 2
Feedback Voltage 1.19 1.23 1.265 V ● full operating temperature range 2
FB Pin Bias Current 45 200 nA ● full operating temperature range 2
Supply Current—VIN 1.9 2.6 mA 2
Switching Frequency 0.8 1.3 1.7 MHz ● full operating temperature range 2
Maximum Duty Cycle 88 91 % ● full operating temperature range 2
Switch Current Limit 165 220 mA ● full operating temperature range; see Note 3 2
Switch VCESAT 350 500 mV ISW = 100mA 2
Switch Leakage Current 0.01 1 µA VSW = 5V 3
Diode VF 740 1100 mV ID = 100mA 3
Diode Reverse Leakage Current 0.1 1 µA VR = 5V 3
Input Resistance—Differential Mode 1 MΩ 2
Input Resistance—Common Mode 200 MΩ 2
Output Resistance 100 kΩ VCC = 35V, VOUT = 2V to 33V 2
FB Line Regulation 0.03 %/V 2.5V < VIN < 16V 2
VIN Voltage 16 V 2
SW Voltage 40 V 2
VCC Voltage 38 V 2
+IN, –IN Voltage 10 V 2
FB Voltage 3 V 2
Current Into SW Pin 1 A 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C 10 sec soldering 2
Operating Temperature Range -40 85 °C Note 2 2
Maximum Junction Temperature TJMAX 125 °C 2
Thermal Resistance, Junction-to-Ambient θJA 250 °C/W 2
Input Common Mode Range 0 10 V 1
Capacitive Load at OUT 5 300 nF gain of 10 configuration 4
VCC Output Capacitance 0.22 µF 4
Gain-Capacitance Product 50 nF 5
Recommended Inductor 47 µH 6

CAD (KiCad official)

  • Symbol: LT3469ETS8#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: lt3469ets8-trpbf-etched.step / lt3469ets8-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3469ets8-trpbf.step / lt3469ets8-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (8 pp, sha256 deda90191d94d17a, retrieved 2026-09-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF