3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3469ETS8#TRPBF
Analog Devices · Special Purpose Amplifiers · TSOT-23-8
LT3469ETS8#TRPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output of the gm amplifier requiring minimum 5nF capacitive load in gain-of-10 configuration and supporting maximum 300nF capacitive load. |
| 2 | FB | input | Feedback pin with 1.23V nominal reference voltage for connection of feedback resistor divider. |
| 3 | VIN | power_in | Input supply pin rated 2.5V to 16V maximum voltage, must be locally bypassed. |
| 4 | GND | power_in | Ground pin, connect directly to local ground plane. |
| 5 | SW | output | Switch pin rated 40V maximum, connect inductor here and minimize trace area to reduce EMI. |
| 6 | VCC | power_out | Output of internal switching regulator and supply rail for gm amplifier, rated 38V maximum, requires minimum 0.22µF capacitance. |
| 7 | +IN | input | Noninverting input terminal of the gm amplifier with input common mode range 0V to 10V. |
| 8 | -IN | input | Inverting input terminal of the gm amplifier with input common mode range 0V to 10V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | 3 | 10 | mV | VOUT = VCC/2, ● full operating temperature range | 2 | ||
| Input Offset Current | 10 | 100 | nA | ● full operating temperature range | 2 | ||
| Input Bias Current | 150 | 500 | nA | ● full operating temperature range | 2 | ||
| Common Mode Rejection Ratio | 70 | 100 | dB | VCM = 0V to 10V | 2 | ||
| Power Supply Rejection Ratio—VIN | 80 | 120 | dB | VIN = 2.5V to 16V | 2 | ||
| Power Supply Rejection Ratio—VCC | 65 | 85 | dB | VCC = 15V to 35V | 2 | ||
| Gain | 15 | 30 | V/mV | No Load, VOUT = 2V to 33V | 2 | ||
| Gain | 10 | 20 | V/mV | RL = 200k, VOUT = 2V to 33V | 2 | ||
| Transconductance | 160 | 220 | 260 | µA/mV | IOUT = ±100µA | 2 | |
| Transconductance | 140 | 300 | µA/mV | ● full operating temperature range | 2 | ||
| Maximum Output Current | 30 | 40 | 55 | mA | VOUT = VCC/2 | 2 | |
| Maximum Output Current | 23 | 58 | mA | ● full operating temperature range | 2 | ||
| Maximum Output Voltage, Sourcing | 34 | 34.5 | V | VCC = 35V, IOUT = 10mA | 2 | ||
| Maximum Output Voltage, Sourcing | 34.5 | 34.9 | V | VCC = 35V, IOUT = 0mA | 2 | ||
| Minimum Output Voltage, Sinking | 200 | 1000 | mV | IOUT = –10mA | 2 | ||
| Minimum Output Voltage, Sinking | 10 | 500 | mV | IOUT = 0mA | 2 | ||
| Supply Current—VCC | 1.5 | 2 | 2.5 | mA | VCC = 35V | 2 | |
| Minimum Operating Voltage | 2.5 | V | 2 | ||||
| Maximum Operating Voltage | 16 | V | 2 | ||||
| Feedback Voltage | 1.19 | 1.23 | 1.265 | V | ● full operating temperature range | 2 | |
| FB Pin Bias Current | 45 | 200 | nA | ● full operating temperature range | 2 | ||
| Supply Current—VIN | 1.9 | 2.6 | mA | 2 | |||
| Switching Frequency | 0.8 | 1.3 | 1.7 | MHz | ● full operating temperature range | 2 | |
| Maximum Duty Cycle | 88 | 91 | % | ● full operating temperature range | 2 | ||
| Switch Current Limit | 165 | 220 | mA | ● full operating temperature range; see Note 3 | 2 | ||
| Switch VCESAT | 350 | 500 | mV | ISW = 100mA | 2 | ||
| Switch Leakage Current | 0.01 | 1 | µA | VSW = 5V | 3 | ||
| Diode VF | 740 | 1100 | mV | ID = 100mA | 3 | ||
| Diode Reverse Leakage Current | 0.1 | 1 | µA | VR = 5V | 3 | ||
| Input Resistance—Differential Mode | 1 | MΩ | 2 | ||||
| Input Resistance—Common Mode | 200 | MΩ | 2 | ||||
| Output Resistance | 100 | kΩ | VCC = 35V, VOUT = 2V to 33V | 2 | |||
| FB Line Regulation | 0.03 | %/V | 2.5V < VIN < 16V | 2 | |||
| VIN Voltage | 16 | V | 2 | ||||
| SW Voltage | 40 | V | 2 | ||||
| VCC Voltage | 38 | V | 2 | ||||
| +IN, –IN Voltage | 10 | V | 2 | ||||
| FB Voltage | 3 | V | 2 | ||||
| Current Into SW Pin | 1 | A | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | 10 sec soldering | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | Note 2 | 2 | ||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 250 | °C/W | 2 | |||
| Input Common Mode Range | 0 | 10 | V | 1 | |||
| Capacitive Load at OUT | 5 | 300 | nF | gain of 10 configuration | 4 | ||
| VCC Output Capacitance | 0.22 | µF | 4 | ||||
| Gain-Capacitance Product | 50 | nF | 5 | ||||
| Recommended Inductor | 47 | µH | 6 |
CAD (KiCad official)
- Symbol:
LT3469ETS8#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
lt3469ets8-trpbf-etched.step/lt3469ets8-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3469ets8-trpbf.step/lt3469ets8-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (8 pp, sha256
deda90191d94d17a, retrieved 2026-09-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).