Generated by kicad-footprint-generator · KiCad file format 20260206
LT3465AES6#TRMPBF
Analog Devices · LED Drivers · TSOT-23-6L
LT3465AES6#TRMPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Output pin connecting to the output capacitor and LEDs; minimize the trace between this pin and the output capacitor to reduce EMI, with output clamped at 30V in open-circuit. |
| 2 | GND | power_in | Ground pin to be connected directly to the local ground plane. |
| 3 | FB | input | Feedback pin with 200mV reference voltage; connect LEDs and a resistor here to set LED current with the CTRL pin voltage. |
| 4 | CTRL | input | Dimming control and shutdown pin; grounding or floating it shuts down the device, and above about 1.8V gives full-scale LED current while below 1V reduces LED current. |
| 5 | VIN | power_in | Input supply pin (2.7V to 16V operating range) that must be locally bypassed with a 1µF X5R or X7R ceramic capacitor. |
| 6 | SW | passive | Switch pin where the inductor is connected, with an absolute maximum of 36V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6L |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Operating Voltage | 2.7 | V | VIN = 3V, VCTRL = 3V | 2 | |||
| Maximum Operating Voltage | 16 | V | VIN = 3V, VCTRL = 3V | 2 | |||
| Feedback Voltage | VFB | 188 | 200 | 212 | mV | 0°C ≤ TA ≤ 85°C | 2 |
| FB Pin Bias Current | 10 | 35 | 100 | nA | 2 | ||
| Supply Current Not Switching | 1.9 | 2.6 | 3.3 | mA | Not Switching | 2 | |
| Supply Current | 2 | 3.2 | 5 | µA | CTRL = 0V | 2 | |
| Switching Frequency | 1.8 | 2.4 | 2.8 | MHz | 2 | ||
| Maximum Duty Cycle | 90 | 93 | % | 2 | |||
| Switch Current Limit | 225 | 340 | mA | 2 | |||
| Switch VCESAT | VCESAT | 300 | mV | ISW = 250mA | 2 | ||
| Switch Leakage Current | 0.01 | 5 | µA | VSW = 5V | 2 | ||
| VCTRL for Full LED Current | 1.8 | V | 2 | ||||
| VCTRL to Enable Chip | 150 | mV | 2 | ||||
| VCTRL to Shut Down Chip | 50 | mV | 2 | ||||
| CTRL Pin Bias Current | 48 | 60 | 72 | µA | 2 | ||
| CTRL Pin Bias Current | 40 | 50 | 60 | µA | TA = 85°C | 2 | |
| CTRL Pin Bias Current | 60 | 75 | 90 | µA | TA = -40°C | 2 | |
| Schottky Forward Drop | 0.7 | V | ID = 150mA | 2 | |||
| Schottky Leakage Current | 4 | µA | VR = 30V | 2 | |||
| Input Voltage | VIN | 16 | V | 2 | |||
| SW Voltage | 36 | V | 2 | ||||
| FB Voltage | 2 | V | 2 | ||||
| CTRL Voltage | 10 | V | 2 | ||||
| Operating Temperature Range | -40 | 85 | °C | Note 2 | 2 | ||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 2 | ||||
| Thermal Resistance Junction-to-Ambient | θJA | 256 | °C/W | in free air | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 120 | °C/W | on board over ground plane | 2 |
CAD (KiCad official)
- Symbol:
LT3465AES6#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
lt3465aes6-trmpbf-etched.step/lt3465aes6-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3465aes6-trmpbf.step/lt3465aes6-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
b57440834455e30a, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).