Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT3465AES6#TRMPBF

Analog Devices · LED Drivers · TSOT-23-6L

LT3465AES6#TRMPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Output pin connecting to the output capacitor and LEDs; minimize the trace between this pin and the output capacitor to reduce EMI, with output clamped at 30V in open-circuit.
2 GND power_in Ground pin to be connected directly to the local ground plane.
3 FB input Feedback pin with 200mV reference voltage; connect LEDs and a resistor here to set LED current with the CTRL pin voltage.
4 CTRL input Dimming control and shutdown pin; grounding or floating it shuts down the device, and above about 1.8V gives full-scale LED current while below 1V reduces LED current.
5 VIN power_in Input supply pin (2.7V to 16V operating range) that must be locally bypassed with a 1µF X5R or X7R ceramic capacitor.
6 SW passive Switch pin where the inductor is connected, with an absolute maximum of 36V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6L
Category Nixie Tube Driver/LED Driver
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Operating Voltage 2.7 V VIN = 3V, VCTRL = 3V 2
Maximum Operating Voltage 16 V VIN = 3V, VCTRL = 3V 2
Feedback Voltage VFB 188 200 212 mV 0°C ≤ TA ≤ 85°C 2
FB Pin Bias Current 10 35 100 nA 2
Supply Current Not Switching 1.9 2.6 3.3 mA Not Switching 2
Supply Current 2 3.2 5 µA CTRL = 0V 2
Switching Frequency 1.8 2.4 2.8 MHz 2
Maximum Duty Cycle 90 93 % 2
Switch Current Limit 225 340 mA 2
Switch VCESAT VCESAT 300 mV ISW = 250mA 2
Switch Leakage Current 0.01 5 µA VSW = 5V 2
VCTRL for Full LED Current 1.8 V 2
VCTRL to Enable Chip 150 mV 2
VCTRL to Shut Down Chip 50 mV 2
CTRL Pin Bias Current 48 60 72 µA 2
CTRL Pin Bias Current 40 50 60 µA TA = 85°C 2
CTRL Pin Bias Current 60 75 90 µA TA = -40°C 2
Schottky Forward Drop 0.7 V ID = 150mA 2
Schottky Leakage Current 4 µA VR = 30V 2
Input Voltage VIN 16 V 2
SW Voltage 36 V 2
FB Voltage 2 V 2
CTRL Voltage 10 V 2
Operating Temperature Range -40 85 °C Note 2 2
Maximum Junction Temperature TJMAX 125 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C 2
Thermal Resistance Junction-to-Ambient θJA 256 °C/W in free air 2
Thermal Resistance Junction-to-Ambient θJA 120 °C/W on board over ground plane 2

CAD (KiCad official)

  • Symbol: LT3465AES6#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6L (KiCad packages3D, STEP)
  • 3D model files: lt3465aes6-trmpbf-etched.step / lt3465aes6-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3465aes6-trmpbf.step / lt3465aes6-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 b57440834455e30a, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF