main
Ray
Publish 0.1.0
372034c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253
{
"slug": "lt3463aedd-trpbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices DC-DC Converters, DFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lt3463aedd#trpbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3463aedd-trpbf.kicad_sym",
"lt3463aedd-trpbf.kicad_mod",
"lt3463aedd-trpbf.glb",
"lt3463aedd-trpbf.step",
"lt3463aedd-trpbf.lbr",
"docs/hero.png",
"docs/lt3463aedd-trpbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3463aedd-trpbf-hero.glb",
"lt3463aedd-trpbf-hero.overlay.json",
"lt3463aedd-trpbf-etched.glb"
],
"component": {
"mpn": "LT3463AEDD#TRPBF",
"manufacturer": "Analog Devices",
"package": "DFN-10-EP(3x3)",
"pin_count": 11,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3463f.pdf",
"parts": {
"symbol": "lt3463aedd-trpbf.kicad_sym",
"footprint": "lt3463aedd-trpbf.kicad_mod",
"model_3d": "lt3463aedd-trpbf-hero.glb",
"model_3d_plain": "lt3463aedd-trpbf-etched.glb",
"model_3d_step": "lt3463aedd-trpbf-etched.step",
"model_3d_step_plain": "lt3463aedd-trpbf.step",
"lbr": "lt3463aedd-trpbf.lbr"
},
"distributor_links": {
"lcsc": "C670579",
"digikey": "505-LT3463AEDD#TRPBFTR-ND",
"mouser": "584-LT3463AEDD#TRPBF"
},
"distributor_check": {
"checked_at": "2026-10-29T03:55:15Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT3463AEDD#TRPBFTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3463AEDD#TRPBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VOUT1",
"type": "power_out",
"description": "Output voltage for switcher 1, the cathode of an internal Schottky diode whose anode is connected to the SW1 pin."
},
{
"number": "2",
"name": "SW1",
"type": "output",
"description": "Switch pin for switcher 1, the collector of the internal NPN switch; minimize the metal trace area on this pin to reduce EMI. The datasheet gives a 42V rating for SW1."
},
{
"number": "3",
"name": "VIN",
"type": "power_in",
"description": "Input supply pin, which should be bypassed with a capacitor as close to the device as possible; the input voltage range is 2.4V to 15V."
},
{
"number": "4",
"name": "SW2",
"type": "output",
"description": "Switch pin for switcher 2, the collector of the internal NPN switch; minimize the metal trace area on this pin to reduce EMI."
},
{
"number": "5",
"name": "D2",
"type": "passive",
"description": "Diode for switcher 2, the anode of an internal Schottky diode whose cathode is connected to the GND pin; the absolute maximum D2 voltage is -42V."
},
{
"number": "6",
"name": "FB2",
"type": "input",
"description": "Feedback pin for switcher 2, used with VREF to set the negative output voltage through resistors R3 and R4; bias current flows out of this pin."
},
{
"number": "7",
"name": "VREF",
"type": "power_in",
"description": "Voltage reference pin that provides 1.25V (typical) and is used along with FB2 to set the negative output voltage of switcher 2."
},
{
"number": "8",
"name": "SHDN2",
"type": "input",
"description": "Shutdown pin for switcher 2; pull above 1.5V to enable it and below 0.3V to turn it off, and do not leave this pin floating."
},
{
"number": "9",
"name": "SHDN1",
"type": "input",
"description": "Shutdown pin for switcher 1; pull above 1.5V to enable it and below 0.3V to turn it off, and do not leave this pin floating."
},
{
"number": "10",
"name": "FB1",
"type": "input",
"description": "Feedback pin for switcher 1, used to set the positive output voltage by selecting values for R1 and R2; the comparator trip voltage is 1.25V typical."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Exposed pad on the package bottom that must be soldered directly to the local ground plane and be electrically connected for proper operation."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin 5 (D2) text says the Schottky cathode connects to the GND pin, which is unusual for a diode anod; Pin 11 is the exposed pad, labeled GND in the datasheet and listed in the pin functions as Pin 11. T; Pin types for VOUT1, SW1, SW2, and VREF are not given as ERC classes in the datasheet; they are infe"
],
"pages_sent": 8,
"cost_usd": 0.0553,
"at": "2026-10-29T03:55:01"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3463f.pdf",
"pages": 8,
"sha256": "049e6a929f6fa875",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3463aedd-trpbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
2.98,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3463aedd-trpbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
2.98,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "8ab8d4db9e2ba0c61c4932f661a105c7ade6c5e896bc220283d62ac680035b7b",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DD",
"source_page": 7,
"D": {
"nom_mm": 3.0,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 3.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
null,
null
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lt3463aedd-trpbf.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}