Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LT3463AEDD#TRPBF
Analog Devices · DC-DC Converters · DFN-10-EP(3x3)
LT3463AEDD#TRPBF from Analog Devices, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT1 | power_out | Output voltage for switcher 1, the cathode of an internal Schottky diode whose anode is connected to the SW1 pin. |
| 2 | SW1 | output | Switch pin for switcher 1, the collector of the internal NPN switch; minimize the metal trace area on this pin to reduce EMI. The datasheet gives a 42V rating for SW1. |
| 3 | VIN | power_in | Input supply pin, which should be bypassed with a capacitor as close to the device as possible; the input voltage range is 2.4V to 15V. |
| 4 | SW2 | output | Switch pin for switcher 2, the collector of the internal NPN switch; minimize the metal trace area on this pin to reduce EMI. |
| 5 | D2 | passive | Diode for switcher 2, the anode of an internal Schottky diode whose cathode is connected to the GND pin; the absolute maximum D2 voltage is -42V. |
| 6 | FB2 | input | Feedback pin for switcher 2, used with VREF to set the negative output voltage through resistors R3 and R4; bias current flows out of this pin. |
| 7 | VREF | power_in | Voltage reference pin that provides 1.25V (typical) and is used along with FB2 to set the negative output voltage of switcher 2. |
| 8 | SHDN2 | input | Shutdown pin for switcher 2; pull above 1.5V to enable it and below 0.3V to turn it off, and do not leave this pin floating. |
| 9 | SHDN1 | input | Shutdown pin for switcher 1; pull above 1.5V to enable it and below 0.3V to turn it off, and do not leave this pin floating. |
| 10 | FB1 | input | Feedback pin for switcher 1, used to set the positive output voltage by selecting values for R1 and R2; the comparator trip voltage is 1.25V typical. |
| 11 | GND | power_in | Exposed pad on the package bottom that must be soldered directly to the local ground plane and be electrically connected for proper operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-10-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VREF Pin Voltage | VREF | 1.23 | 1.25 | 1.27 | V | With 124kΩ to GND; ● over full operating temperature range | 2 |
| FB1 Comparator Trip Voltage | 1.225 | 1.25 | 1.275 | V | High to Low Transition; ● over full operating temperature range | 2 | |
| FB2 Comparator Trip Voltage | 0 | 3 | 12 | mV | Low to High Transition; ● over full operating temperature range | 2 | |
| Switch Current Limit (SW1) | 180 | 250 | 320 | mA | 2 | ||
| Switch Current Limit (SW2), LT3463A | 320 | 400 | 460 | mA | LT3463A row | 2 | |
| SHDN1/SHDN2 Start-Up Threshold | 0.3 | 1 | 1.5 | V | 2 | ||
| Minimum Input Voltage | 2.2 | 2.4 | V | 2 | |||
| Total Quiescent Current | 40 | 60 | µA | For Both Switchers, Not Switching | 2 | ||
| Shutdown Current | 0.1 | 1 | µA | VSHDN1 = VSHDN2 = 0V | 2 | ||
| VREF Pin Voltage Line Regulation | 0.05 | 0.1 | %/V | With 124kΩ to GND | 2 | ||
| FB1 Line Regulation | 0.05 | 0.1 | %/V | 2.5V < VIN < 15V | 2 | ||
| FB1 Pin Bias Current | 20 | 50 | nA | VFB1 = 1.3V; ● over full operating temperature range | 2 | ||
| FB2 Line Regulation | 0.05 | 0.1 | %/V | 2.5V < VIN < 15V | 2 | ||
| FB2 Pin Bias Current | 20 | 50 | nA | VFB2 = -0.1V; ● over full operating temperature range | 2 | ||
| Switch Leakage Current (SW1, SW2) | 0.01 | 1 | µA | Switch off, VSW = 42V | 2 | ||
| Schottky Reverse Leakage Current | 1 | 5 | µA | VOUT1, VSW = 42V | 2 | ||
| SHDN1 Pin Current | 4 | 10 | µA | VSHDN1 = 2.5V | 2 | ||
| SHDN2 Pin Current | 4 | 10 | µA | VSHDN2 = 2.5V | 2 | ||
| VIN, SHDN1, SHDN2 Voltage | VIN, VSHDN1, VSHDN2 | 15 | V | Absolute Maximum Rating (Note 1) | 2 | ||
| SW1, SW2, VOUT1 Voltage | VSW1, VSW2, VOUT1 | 42 | V | Absolute Maximum Rating (Note 1) | 2 | ||
| D2 Voltage | VD2 | -42 | V | Absolute Maximum Rating (Note 1) | 2 | ||
| FB1, FB2 Voltage Range | VFB1, VFB2 | -0.3 | 2 | V | Absolute Maximum Rating (Note 1) | 2 | |
| Junction Temperature | TJ | 125 | °C | 2 | |||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | Note 2: guaranteed performance 0°C to 70°C; -40°C to 85°C assured by design, characterization and correlation | 2 | |
| Storage Temperature Range | TSTG | -65 | 125 | °C | 2 | ||
| Junction-to-Ambient Thermal Resistance (DD package) | θJA | 43 | °C/W | TJMAX = 125°C (as printed with θJA) | 2 | ||
| Junction-to-Case Thermal Resistance (DD package) | θJC | 3 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT3463AEDD#TRPBF - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lt3463aedd-trpbf-etched.step/lt3463aedd-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3463aedd-trpbf.step/lt3463aedd-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (8 pp, sha256
049e6a929f6fa875, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).