main
Ray
Publish 0.1.0
48d021f
LT3085IDCB#TRMPBF
Analog Devices · Linear Voltage Regulators (LDO) · DFN-6-EP(2x3)
LT3085IDCB#TRMPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Power output of the regulator; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability. |
| 2 | OUT | power_out | Power output of the regulator, to be connected in common with pin 1; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability. |
| 3 | SET | input | Non-inverting input to the error amplifier and regulation set point; a fixed 10µA flows out of this pin through a single external resistor to program the output voltage from zero to the absolute maximum rated output voltage, with SET pin current limited to ±15mA and SET pin voltage to ±10V relative to OUT. |
| 4 | VCONTROL | power_in | Supply pin for the control circuitry; for the device to regulate, this pin must be more than 1.2V to 1.35V greater than the output voltage, with an absolute maximum of 40V. |
| 5 | IN | power_in | Collector of the power device through which the output load current is supplied; for regulation this pin must be more than 0.1V to 0.5V greater than the output voltage, with an absolute maximum of 40V. |
| 6 | IN | power_in | Collector of the power device through which the output load current is supplied, to be connected in common with pin 5; for regulation this pin must be more than 0.1V to 0.5V greater than the output voltage, with an absolute maximum of 40V. |
| 7 | OUT (Exposed Pad) | power_out | Exposed pad is electrically the OUT node and must be tied directly to pins 1 and 2 at the PCB; it is also the thermal path to the board. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x3) |
| Category | Power Supply Chip |
| Pins | 7 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SET Pin Current (25°C) | ISET | 9.9 | 10 | 10.1 | µA | VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C | 3 |
| SET Pin Current (full operating temperature range) | ISET | 9.8 | 10 | 10.2 | µA | VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9), full operating temperature range (l) | 3 |
| Output Offset Voltage (VOUT, VSET) (25°C) | VOS | -1.5 | 1.5 | mV | VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C | 3 | |
| Output Offset Voltage (VOUT, VSET) (full operating temperature range) | VOS | -3 | 3 | mV | VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9), full operating temperature range (l) | 3 | |
| Load Regulation (ΔVOS) | ΔVOS | -1 | -0.6 | mV | ΔILOAD = 1mA to 500mA (Note 8), full operating temperature range (l) | 3 | |
| Line Regulation (ΔISET) | ΔISET/ΔVIN | 0.1 | 0.5 | nA/V | ΔVIN = 1V to 36V, ΔVCONTROL = 2V to 36V, ILOAD = 1mA | 3 | |
| Minimum Load Current (VIN = VCONTROL = 10V) | 300 | 500 | µA | VIN = VCONTROL = 10V (Notes 3, 9), full operating temperature range (l) | 3 | ||
| Minimum Load Current (VIN = VCONTROL = 36V) | 1 | mA | VIN = VCONTROL = 36V (Notes 3, 9), full operating temperature range (l) | 3 | |||
| VCONTROL Dropout Voltage (100mA) | 1.2 | V | ILOAD = 100mA (Note 4) | 3 | |||
| VCONTROL Dropout Voltage (500mA) | 1.35 | 1.6 | V | ILOAD = 500mA (Note 4), full operating temperature range (l) | 3 | ||
| VIN Dropout Voltage (100mA) | 85 | 150 | mV | ILOAD = 100mA (Note 4) | 3 | ||
| VIN Dropout Voltage (500mA) | 275 | 450 | mV | ILOAD = 500mA (Note 4), full operating temperature range (l) | 3 | ||
| VCONTROL Pin Current (100mA) | 3 | 6 | mA | ILOAD = 100mA (Note 5), full operating temperature range (l) | 3 | ||
| VCONTROL Pin Current (500mA) | 8 | 15 | mA | ILOAD = 500mA (Note 5), full operating temperature range (l) | 3 | ||
| Current Limit | 500 | 650 | mA | VIN = 5V, VCONTROL = 5V, VSET = 0V, VOUT = -0.1V (Note 9), full operating temperature range (l) | 3 | ||
| Error Amplifier RMS Output Noise | 33 | µVRMS | ILOAD = 500mA, 10Hz ≤ f ≤ 100kHz, COUT = 10µF, CSET = 0.1µF (Note 6) | 3 | |||
| Reference Current RMS Output Noise | 0.7 | nARMS | 10Hz ≤ f ≤ 100kHz (Note 6) | 3 | |||
| Ripple Rejection (f = 120Hz) | 90 | dB | f = 120Hz, VRIPPLE = 0.5VP-P, ILOAD = 0.1A, CSET = 0.1µF, COUT = 2.2µF | 3 | |||
| Ripple Rejection (f = 10kHz) | 75 | dB | f = 10kHz | 3 | |||
| Ripple Rejection (f = 1MHz) | 20 | dB | f = 1MHz | 3 | |||
| Thermal Regulation, ISET | 0.003 | %/W | 10ms Pulse | 3 | |||
| VCONTROL Pin Voltage (absolute maximum) | VCONTROL | -0.3 | 40 | V | All voltages relative to VOUT (Note 1) | 2 | |
| IN Pin Voltage (absolute maximum) | VIN | -0.3 | 40 | V | All voltages relative to VOUT (Note 1) | 2 | |
| SET Pin Current (absolute maximum) | ISET | -15 | 15 | mA | Note 7 | 2 | |
| SET Pin Voltage relative to OUT (absolute maximum) | VSET | -10 | 10 | V | Relative to OUT | 2 | |
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | E, I grade (Notes 2, 10) | 2 | |
| Maximum Junction Temperature | TJMAX | 125 | °C | DCB package | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Input Voltage Range | VIN | 1.2 | 36 | V | Wide input voltage range as stated in Features | 1 | |
| Thermal Resistance, Junction-to-Ambient | θJA | 73 | °C/W | DCB 6-lead DFN package | 2 | ||
| Thermal Resistance, Junction-to-Case | θJC | 10.6 | °C/W | DCB 6-lead DFN package | 2 | ||
| Thermal Resistance, Junction-to-Ambient (topside 2500mm², backside 2500mm², board 2500mm²) | θJA | 68 | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 | ||
| Thermal Resistance, Junction-to-Ambient (topside 1000mm², backside 2500mm², board 2500mm²) | θJA | 70 | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 | ||
| Thermal Resistance, Junction-to-Ambient (topside 225mm², backside 2500mm², board 2500mm²) | θJA | 73 | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 | ||
| Thermal Resistance, Junction-to-Ambient (topside 100mm², backside 2500mm², board 2500mm²) | θJA | 78 | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | COPPER | Table 3. MSE Package, 8-Lead MSOP COPPER AREA THERMAL RESISTANCE | 15 |
CAD (KiCad official)
- Symbol:
LT3085IDCB#TRMPBF - Footprint:
Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm - 3D model: DFN-6-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lt3085idcb-etched.step/lt3085idcb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3085idcb.step/lt3085idcb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (28 pp, sha256
c5243716ea4c9cc7, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT3085IDCB#TRMPBF
**Analog Devices** · Linear Voltage Regulators (LDO) · DFN-6-EP(2x3)
LT3085IDCB#TRMPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Power output of the regulator; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability. |
| 2 | OUT | power_out | Power output of the regulator, to be connected in common with pin 1; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability. |
| 3 | SET | input | Non-inverting input to the error amplifier and regulation set point; a fixed 10µA flows out of this pin through a single external resistor to program the output voltage from zero to the absolute maximum rated output voltage, with SET pin current limited to ±15mA and SET pin voltage to ±10V relative to OUT. |
| 4 | VCONTROL | power_in | Supply pin for the control circuitry; for the device to regulate, this pin must be more than 1.2V to 1.35V greater than the output voltage, with an absolute maximum of 40V. |
| 5 | IN | power_in | Collector of the power device through which the output load current is supplied; for regulation this pin must be more than 0.1V to 0.5V greater than the output voltage, with an absolute maximum of 40V. |
| 6 | IN | power_in | Collector of the power device through which the output load current is supplied, to be connected in common with pin 5; for regulation this pin must be more than 0.1V to 0.5V greater than the output voltage, with an absolute maximum of 40V. |
| 7 | OUT (Exposed Pad) | power_out | Exposed pad is electrically the OUT node and must be tied directly to pins 1 and 2 at the PCB; it is also the thermal path to the board. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-6-EP(2x3) |
| Category | Power Supply Chip |
| Pins | 7 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| SET Pin Current (25°C) | ISET | 9.9 | 10 | 10.1 | µA | VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C | 3 |
| SET Pin Current (full operating temperature range) | ISET | 9.8 | 10 | 10.2 | µA | VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9), full operating temperature range (l) | 3 |
| Output Offset Voltage (VOUT, VSET) (25°C) | VOS | -1.5 | | 1.5 | mV | VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C | 3 |
| Output Offset Voltage (VOUT, VSET) (full operating temperature range) | VOS | -3 | | 3 | mV | VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9), full operating temperature range (l) | 3 |
| Load Regulation (ΔVOS) | ΔVOS | -1 | -0.6 | | mV | ΔILOAD = 1mA to 500mA (Note 8), full operating temperature range (l) | 3 |
| Line Regulation (ΔISET) | ΔISET/ΔVIN | | 0.1 | 0.5 | nA/V | ΔVIN = 1V to 36V, ΔVCONTROL = 2V to 36V, ILOAD = 1mA | 3 |
| Minimum Load Current (VIN = VCONTROL = 10V) | | | 300 | 500 | µA | VIN = VCONTROL = 10V (Notes 3, 9), full operating temperature range (l) | 3 |
| Minimum Load Current (VIN = VCONTROL = 36V) | | | | 1 | mA | VIN = VCONTROL = 36V (Notes 3, 9), full operating temperature range (l) | 3 |
| VCONTROL Dropout Voltage (100mA) | | | 1.2 | | V | ILOAD = 100mA (Note 4) | 3 |
| VCONTROL Dropout Voltage (500mA) | | | 1.35 | 1.6 | V | ILOAD = 500mA (Note 4), full operating temperature range (l) | 3 |
| VIN Dropout Voltage (100mA) | | | 85 | 150 | mV | ILOAD = 100mA (Note 4) | 3 |
| VIN Dropout Voltage (500mA) | | | 275 | 450 | mV | ILOAD = 500mA (Note 4), full operating temperature range (l) | 3 |
| VCONTROL Pin Current (100mA) | | | 3 | 6 | mA | ILOAD = 100mA (Note 5), full operating temperature range (l) | 3 |
| VCONTROL Pin Current (500mA) | | | 8 | 15 | mA | ILOAD = 500mA (Note 5), full operating temperature range (l) | 3 |
| Current Limit | | 500 | 650 | | mA | VIN = 5V, VCONTROL = 5V, VSET = 0V, VOUT = -0.1V (Note 9), full operating temperature range (l) | 3 |
| Error Amplifier RMS Output Noise | | | 33 | | µVRMS | ILOAD = 500mA, 10Hz ≤ f ≤ 100kHz, COUT = 10µF, CSET = 0.1µF (Note 6) | 3 |
| Reference Current RMS Output Noise | | | 0.7 | | nARMS | 10Hz ≤ f ≤ 100kHz (Note 6) | 3 |
| Ripple Rejection (f = 120Hz) | | | 90 | | dB | f = 120Hz, VRIPPLE = 0.5VP-P, ILOAD = 0.1A, CSET = 0.1µF, COUT = 2.2µF | 3 |
| Ripple Rejection (f = 10kHz) | | | 75 | | dB | f = 10kHz | 3 |
| Ripple Rejection (f = 1MHz) | | | 20 | | dB | f = 1MHz | 3 |
| Thermal Regulation, ISET | | | 0.003 | | %/W | 10ms Pulse | 3 |
| VCONTROL Pin Voltage (absolute maximum) | VCONTROL | -0.3 | | 40 | V | All voltages relative to VOUT (Note 1) | 2 |
| IN Pin Voltage (absolute maximum) | VIN | -0.3 | | 40 | V | All voltages relative to VOUT (Note 1) | 2 |
| SET Pin Current (absolute maximum) | ISET | -15 | | 15 | mA | Note 7 | 2 |
| SET Pin Voltage relative to OUT (absolute maximum) | VSET | -10 | | 10 | V | Relative to OUT | 2 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | E, I grade (Notes 2, 10) | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | DCB package | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Input Voltage Range | VIN | 1.2 | | 36 | V | Wide input voltage range as stated in Features | 1 |
| Thermal Resistance, Junction-to-Ambient | θJA | | 73 | | °C/W | DCB 6-lead DFN package | 2 |
| Thermal Resistance, Junction-to-Case | θJC | | 10.6 | | °C/W | DCB 6-lead DFN package | 2 |
| Thermal Resistance, Junction-to-Ambient (topside 2500mm², backside 2500mm², board 2500mm²) | θJA | | 68 | | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 |
| Thermal Resistance, Junction-to-Ambient (topside 1000mm², backside 2500mm², board 2500mm²) | θJA | | 70 | | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 |
| Thermal Resistance, Junction-to-Ambient (topside 225mm², backside 2500mm², board 2500mm²) | θJA | | 73 | | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 |
| Thermal Resistance, Junction-to-Ambient (topside 100mm², backside 2500mm², board 2500mm²) | θJA | | 78 | | °C/W | DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air | 15 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | COPPER | | Table 3. MSE Package, 8-Lead MSOP COPPER AREA THERMAL RESISTANCE | 15 |
## CAD (KiCad official)
- Symbol: `LT3085IDCB#TRMPBF`
- Footprint: `Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm`
- 3D model: DFN-6-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lt3085idcb-etched.step` / `lt3085idcb-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3085idcb.step` / `lt3085idcb.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt3085.pdf) (28 pp, sha256 `c5243716ea4c9cc7`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt3085idcb-datasheet.pdf)