main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3085idcb: viewers rendered from the public page · Ray
lt3085idcb-etched.glb Publish 0.1.0 · Ray
lt3085idcb-etched.step lt3085idcb: factory component page (tier=mfr) · Ray
lt3085idcb-hero.glb lt3085idcb: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3085idcb-hero.overlay.json Publish 0.1.0 · Ray
lt3085idcb.glb Publish 0.1.0 · Ray
lt3085idcb.kicad_mod Publish 0.1.0 · Ray
lt3085idcb.kicad_sym Publish 0.1.0 · Ray
lt3085idcb.lbr Publish 0.1.0 · Ray
lt3085idcb.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 7 pins · Ray

LT3085IDCB#TRMPBF

Analog Devices · Linear Voltage Regulators (LDO) · DFN-6-EP(2x3)

LT3085IDCB#TRMPBF from Analog Devices, in a DFN-6-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Power output of the regulator; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability.
2 OUT power_out Power output of the regulator, to be connected in common with pin 1; a minimum load current of 1mA is required or the output may not regulate, and a minimum 2.2µF output capacitor is required for stability.
3 SET input Non-inverting input to the error amplifier and regulation set point; a fixed 10µA flows out of this pin through a single external resistor to program the output voltage from zero to the absolute maximum rated output voltage, with SET pin current limited to ±15mA and SET pin voltage to ±10V relative to OUT.
4 VCONTROL power_in Supply pin for the control circuitry; for the device to regulate, this pin must be more than 1.2V to 1.35V greater than the output voltage, with an absolute maximum of 40V.
5 IN power_in Collector of the power device through which the output load current is supplied; for regulation this pin must be more than 0.1V to 0.5V greater than the output voltage, with an absolute maximum of 40V.
6 IN power_in Collector of the power device through which the output load current is supplied, to be connected in common with pin 5; for regulation this pin must be more than 0.1V to 0.5V greater than the output voltage, with an absolute maximum of 40V.
7 OUT (Exposed Pad) power_out Exposed pad is electrically the OUT node and must be tied directly to pins 1 and 2 at the PCB; it is also the thermal path to the board.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-6-EP(2x3)
Category Power Supply Chip
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
SET Pin Current (25°C) ISET 9.9 10 10.1 µA VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C 3
SET Pin Current (full operating temperature range) ISET 9.8 10 10.2 µA VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9), full operating temperature range (l) 3
Output Offset Voltage (VOUT, VSET) (25°C) VOS -1.5 1.5 mV VIN = 1V, VCONTROL = 2V, ILOAD = 1mA, TJ = 25°C 3
Output Offset Voltage (VOUT, VSET) (full operating temperature range) VOS -3 3 mV VIN ≥ 1V, VCONTROL ≥ 2V, 1mA ≤ ILOAD ≤ 500mA (Note 9), full operating temperature range (l) 3
Load Regulation (ΔVOS) ΔVOS -1 -0.6 mV ΔILOAD = 1mA to 500mA (Note 8), full operating temperature range (l) 3
Line Regulation (ΔISET) ΔISET/ΔVIN 0.1 0.5 nA/V ΔVIN = 1V to 36V, ΔVCONTROL = 2V to 36V, ILOAD = 1mA 3
Minimum Load Current (VIN = VCONTROL = 10V) 300 500 µA VIN = VCONTROL = 10V (Notes 3, 9), full operating temperature range (l) 3
Minimum Load Current (VIN = VCONTROL = 36V) 1 mA VIN = VCONTROL = 36V (Notes 3, 9), full operating temperature range (l) 3
VCONTROL Dropout Voltage (100mA) 1.2 V ILOAD = 100mA (Note 4) 3
VCONTROL Dropout Voltage (500mA) 1.35 1.6 V ILOAD = 500mA (Note 4), full operating temperature range (l) 3
VIN Dropout Voltage (100mA) 85 150 mV ILOAD = 100mA (Note 4) 3
VIN Dropout Voltage (500mA) 275 450 mV ILOAD = 500mA (Note 4), full operating temperature range (l) 3
VCONTROL Pin Current (100mA) 3 6 mA ILOAD = 100mA (Note 5), full operating temperature range (l) 3
VCONTROL Pin Current (500mA) 8 15 mA ILOAD = 500mA (Note 5), full operating temperature range (l) 3
Current Limit 500 650 mA VIN = 5V, VCONTROL = 5V, VSET = 0V, VOUT = -0.1V (Note 9), full operating temperature range (l) 3
Error Amplifier RMS Output Noise 33 µVRMS ILOAD = 500mA, 10Hz ≤ f ≤ 100kHz, COUT = 10µF, CSET = 0.1µF (Note 6) 3
Reference Current RMS Output Noise 0.7 nARMS 10Hz ≤ f ≤ 100kHz (Note 6) 3
Ripple Rejection (f = 120Hz) 90 dB f = 120Hz, VRIPPLE = 0.5VP-P, ILOAD = 0.1A, CSET = 0.1µF, COUT = 2.2µF 3
Ripple Rejection (f = 10kHz) 75 dB f = 10kHz 3
Ripple Rejection (f = 1MHz) 20 dB f = 1MHz 3
Thermal Regulation, ISET 0.003 %/W 10ms Pulse 3
VCONTROL Pin Voltage (absolute maximum) VCONTROL -0.3 40 V All voltages relative to VOUT (Note 1) 2
IN Pin Voltage (absolute maximum) VIN -0.3 40 V All voltages relative to VOUT (Note 1) 2
SET Pin Current (absolute maximum) ISET -15 15 mA Note 7 2
SET Pin Voltage relative to OUT (absolute maximum) VSET -10 10 V Relative to OUT 2
Operating Junction Temperature Range TJ -40 125 °C E, I grade (Notes 2, 10) 2
Maximum Junction Temperature TJMAX 125 °C DCB package 2
Storage Temperature Range TSTG -65 150 °C 2
Input Voltage Range VIN 1.2 36 V Wide input voltage range as stated in Features 1
Thermal Resistance, Junction-to-Ambient θJA 73 °C/W DCB 6-lead DFN package 2
Thermal Resistance, Junction-to-Case θJC 10.6 °C/W DCB 6-lead DFN package 2
Thermal Resistance, Junction-to-Ambient (topside 2500mm², backside 2500mm², board 2500mm²) θJA 68 °C/W DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air 15
Thermal Resistance, Junction-to-Ambient (topside 1000mm², backside 2500mm², board 2500mm²) θJA 70 °C/W DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air 15
Thermal Resistance, Junction-to-Ambient (topside 225mm², backside 2500mm², board 2500mm²) θJA 73 °C/W DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air 15
Thermal Resistance, Junction-to-Ambient (topside 100mm², backside 2500mm², board 2500mm²) θJA 78 °C/W DCB 6-lead DFN, 2-sided 1/16in FR-4, 1oz copper, still air 15

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts COPPER Table 3. MSE Package, 8-Lead MSOP COPPER AREA THERMAL RESISTANCE 15

CAD (KiCad official)

  • Symbol: LT3085IDCB#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm
  • 3D model: DFN-6-EP(2x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lt3085idcb-etched.step / lt3085idcb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3085idcb.step / lt3085idcb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 c5243716ea4c9cc7, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF