LT3060ITS8#TRMPBF

{
  "slug": "lt3060its8-trmpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Linear Voltage Regulators (LDO), TSOT-23-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "lt3060its8#trmpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3060its8-trmpbf.kicad_sym",
    "lt3060its8-trmpbf.kicad_mod",
    "lt3060its8-trmpbf.glb",
    "lt3060its8-trmpbf.step",
    "lt3060its8-trmpbf.lbr",
    "docs/hero.png",
    "docs/lt3060its8-trmpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3060its8-trmpbf-hero.glb",
    "lt3060its8-trmpbf-hero.overlay.json",
    "lt3060its8-trmpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3060ITS8#TRMPBF",
    "manufacturer": "Analog Devices",
    "package": "TSOT-23-8",
    "pin_count": 8,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3060.pdf",
    "parts": {
      "symbol": "lt3060its8-trmpbf.kicad_sym",
      "footprint": "lt3060its8-trmpbf.kicad_mod",
      "model_3d": "lt3060its8-trmpbf-hero.glb",
      "model_3d_plain": "lt3060its8-trmpbf-etched.glb",
      "model_3d_step": "lt3060its8-trmpbf-etched.step",
      "model_3d_step_plain": "lt3060its8-trmpbf.step",
      "lbr": "lt3060its8-trmpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C670017",
      "digikey": "LT3060ITS8#TRMPBFTR-ND",
      "mouser": "584-LT3060ITS8TRMPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T22:42:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3060ITS8#TRMPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3060ITS8TRMPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SHDN",
        "type": "input",
        "description": "Pulling SHDN low puts the LT3060 into a low power state and turns the output off, and the SHDN pin cannot be driven below GND unless tied to IN."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; for the adjustable LT3060 the bottom of the output-setting resistor divider connects directly to GND for optimum regulation."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; tied together with pins 2 and 4 as the TS8 package ground connection."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; tied together with pins 2 and 3 as the TS8 package ground connection."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "Supplies power to the device; an input bypass capacitor of 1µF to 10µF suffices and the LT3060 withstands reverse voltages on IN with respect to its GND and OUT pins."
      },
      {
        "number": "6",
        "name": "OUT",
        "type": "power_out",
        "description": "Supplies power to the load; stability requires a minimum 2.2µF ceramic output capacitor and the permissible output voltage range is 600mV to 44.5V."
      },
      {
        "number": "7",
        "name": "ADJ",
        "type": "input",
        "description": "Error amplifier inverting terminal held at 600mV referenced to GND with a typical bias current of 15nA flowing out of the pin; left floating for fixed-voltage versions if low noise and fast transient response are not required."
      },
      {
        "number": "8",
        "name": "REF/BYP",
        "type": "passive",
        "description": "A single capacitor from this pin to GND bypasses reference noise and soft-starts the reference, and the pin must not be driven with any active circuitry."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 7,
        "cost_usd": 0.0208,
        "at": "2026-10-30T22:42:10"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3060.pdf",
        "pages": 26,
        "sha256": "1da5b0984b8afdd3",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3060its8-trmpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dc644a91883054d8f75e38542e63c2050dc8f2e8b7f12e1c57dcd93245fbd473",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3060its8-trmpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          0.95
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "91ccfe78cfcf5a193b48c7617da704d757973c0f7913731052b5cfc03ccb223d",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}