LT3060EDC-3.3#TRPBF

{
  "slug": "lt3060edc-3-3-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Linear Voltage Regulators (LDO), DFN-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "lt3060edc-3.3#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3060edc-3-3-trpbf.kicad_sym",
    "lt3060edc-3-3-trpbf.kicad_mod",
    "lt3060edc-3-3-trpbf.glb",
    "lt3060edc-3-3-trpbf.step",
    "lt3060edc-3-3-trpbf.lbr",
    "docs/hero.png",
    "docs/lt3060edc-3-3-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3060edc-3-3-trpbf-hero.glb",
    "lt3060edc-3-3-trpbf-hero.overlay.json",
    "lt3060edc-3-3-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3060EDC-3.3#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-8-EP(2x2)",
    "pin_count": 9,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3060.pdf",
    "parts": {
      "symbol": "lt3060edc-3-3-trpbf.kicad_sym",
      "footprint": "lt3060edc-3-3-trpbf.kicad_mod",
      "model_3d": "lt3060edc-3-3-trpbf-hero.glb",
      "model_3d_plain": "lt3060edc-3-3-trpbf-etched.glb",
      "model_3d_step": "lt3060edc-3-3-trpbf-etched.step",
      "model_3d_step_plain": "lt3060edc-3-3-trpbf.step",
      "lbr": "lt3060edc-3-3-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C669921",
      "digikey": "505-LT3060EDC-3.3#TRPBFTR-ND",
      "mouser": "584-3060EDC-3.3TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T01:53:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT3060EDC-3.3#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-3060EDC-3.3TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "REF/BYP",
        "type": "passive",
        "description": "A single capacitor from this pin to GND bypasses the reference noise and soft-starts the reference (10nF typically gives 30µVRMS noise over 10Hz to 100kHz), and the pin must not be driven by active circuitry and must be left floating if low noise or soft-start is not required."
      },
      {
        "number": "2",
        "name": "ADJ",
        "type": "input",
        "description": "This is the error amplifier's inverting input with a typical 15nA bias flowing out of the pin and 600mV referenced to GND, and for fixed-voltage versions it must be left floating if low noise and fast transient response are not required."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "power_out",
        "description": "This pin supplies power to the load, requires a minimum 2.2µF ceramic output capacitor for stability, and the permissible output voltage range is 600mV to 44.5V."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "power_out",
        "description": "This pin supplies power to the load and is internally connected with pin 3 as an output, with the same 2.2µF minimum ceramic output capacitor requirement and 600mV to 44.5V permissible output range."
      },
      {
        "number": "5",
        "name": "IN",
        "type": "power_in",
        "description": "This pin supplies power to the device over the 1.6V to 45V input range, needs a 1µF to 10µF bypass capacitor (local to the pin if more than six inches from the main input filter), and withstands reverse voltage relative to GND and OUT."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "This pin supplies power to the device over the 1.6V to 45V input range and is internally connected with pin 5 as an input, with the same 1µF to 10µF bypass capacitor guidance and reverse-voltage withstand."
      },
      {
        "number": "7",
        "name": "SHDN",
        "type": "input",
        "description": "Pulling this pin low puts the LT3060 into shutdown and turns the output off, it must not be driven below GND unless tied to IN, the device does not function if the pin is left unconnected, and it is connected to IN if unused."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "This is the ground pin, which for the DFN package must be tied to the exposed pad (pin 9) and the PCB ground."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "The exposed pad is GND, must be soldered to the PCB, and provides enhanced thermal performance through its connection to PCB ground with TJMAX = 125°C and θJA = 48°C/W to 60°C/W for the DFN package."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives pin numbers as paired 'Pin X/Pin Y' in the Pin Functions section, with no explic; The DFN top-view graphic is garbled in the text extraction, so pin numbers were cross-checked from t; The datasheet's pin functions describe the adjustable and fixed-output versions together. For the fi"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0683,
        "at": "2026-10-29T01:52:46"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3060.pdf",
        "pages": 26,
        "sha256": "1da5b0984b8afdd3",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3060edc-3-3-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6d66d1cc979ced2221ae536e0e0c72e1e12e47a452f2d8a7db307388a259dfc8",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3060edc-3-3-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.0,
          1.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4cea8e71fb774e55b09d055376e001313247896261a24a5471bba37636ee30c3",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DC8",
      "source_page": 23,
      "D": {
        "nom_mm": 2.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 2.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.45,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          null,
          null
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3060edc-3-3-trpbf.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}