component

LT3045EMSE#TRPBF

Public Made by Adom

by adom

Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-12-EP. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentpower management (pmic)lt3045emse-trpbfboard-derived

Verified LT3045EMSE#TRPBF

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record, 1 retired · files match
SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Analog Devices' LT3045 datasheet (Rev. D, 11/22)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet replaced: the page carried a JLCPCB copy (tier lcsc, Rev. B); now ADI's Rev. D (11/22, 32 pages) from analog.com/media/en/technical-documentation/data-sheets/lt3045.pdf, fetched 2026-10-27
  • ✓Orderable LT3045EMSE#TRPBF is the tape-and-reel 12-lead plastic MSOP (MSE), marking 3045, -40 to 125 °C (Order Information, p.2)
  • ✓All 13 pins match the MSE pin configuration (p.2) and Pin Functions (p.12-13) by number and name: IN 1/2/3, EN/UV 4, PG 5, ILIM 6, PGFB 7, SET 8, GND 9, OUTS 10, OUT 11/12, exposed pad 13 = GND ('EXPOSED PAD (PIN 13) IS GND, MUST BE SOLDERED TO PCB'); no renames needed
  • ✓Pin types: IN power_in, EN/UV and PGFB input, PG open_collector (open-collector flag), OUTS input (error amplifier input), OUT power_out, GND power_in; ILIM (programming pin that sources a current) and SET (error amplifier input that sources 100µA) kept passive
  • •Shared pins: pins 2/3 (IN), 12 (OUT) and 13 (GND, exposed pad) are hidden pins stacked at the same coordinates as visible pins 1, 11 and 9, and are typed passive. This is KiCad's stacked-pin convention: a hidden power_in pin would join an implicit global net named after the pin, and stacked power_out pins would conflict in ERC. The visible pin of each stack has the datasheet's type, so each net has one power_in, power_out or power_in pin
  • ✓All 13 descriptions rewritten from Pin Functions (p.12-13). The old text was copied across stacked pins: pins 2 and 3 said 'shared with pins 2 and 3' and pin 12 said 'shared with pin 12'; now every IN pin says 'pins 1, 2, 3' and every OUT pin 'pins 11, 12'. Dropped values that are not in the pin functions (1.8V to 20V range, ±22V, 1.18V, 500mA)
  • ✓Footprint vs MSE package 05-08-1666 Rev G (p.30): 12 pads at e = 0.65 mm, pin 1 top-left, 1-6 down the left, 7-12 up the right, as the p.2 top view; pads 1.45 x 0.40 at x = ±2.15 against ADI's recommended 0.889 ±0.127 x 0.42 ±0.038 (inner edges 3.20-3.45 apart, outer span 5.10 min); the KiCad pads are longer (inner edges 2.85 apart, outer span 5.75) and 0.40 wide (within 0.382-0.458), and cover the leads: tips at 4.90 ±0.152 span, foot 0.53 ±0.152, lead width 0.22-0.38
  • ✓Exposed pad 13: 1.651 x 2.845 mm at the centre, long side along the lead rows, equal to the drawing's 1.651 ±0.102 x 2.845 ±0.102 and ADI's recommended pad; copper and mask, with four 0.67 x 1.15 paste windows
  • ✓3D body 4.90 x 4.039 x 0.95 mm against lead span 4.90 ±0.152, body 4.039 ±0.102 (and 3.00 ±0.102 across), height 1.10 max (p.30); seated on z = 0, centred on the pads, pin-1 dot at the top-left corner (matching GLB)
  • ✓DigiKey 505-LT3045EMSE#TRPBFTR-ND (tape and reel; DigiKey product URL names LT3045EMSE-TRPBF) and Mouser 584-LT3045EMSE#TRPBF kept and added to specs
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Analog Devices)
Verified files✓ lt3045emse-trpbf.kicad_sym✓ lt3045emse-trpbf.kicad_mod✓ lt3045emse-trpbf.step
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓13 of 13 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! lt3045emse-trpbf.kicad_sym! lt3045emse-trpbf.kicad_mod✓ lt3045emse-trpbf.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
lt3045emse-trpbf / lt3045emse-trpbf.kicad_mod
HistoryDownload
Caleb Publish 0.1.1 8c62b67 2d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514
(footprint "LT3045EMSE#TRPBF"
	(layer "F.Cu")
	(descr "MSOP, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081666_g_mse12.pdf)"
	)
	(tags "MSOP SO")
	(property "Reference" "REF**"
		(at 0 -2.97 180)
		(layer "F.SilkS")
		(hide yes)
		(uuid "25548dac-ea3b-45d1-9e82-91479c198b6d")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Value" "LT3045EMSE#TRPBF"
		(at 0 2.97 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "b3d1e194-86c2-48ae-9e8e-76272737c2a0")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Datasheet" "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3045.pdf"
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "6038a2a8-166a-493d-8599-0ee6982790b8")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "Description" "500mA, Adjustable, Ultralow Noise, Ultrahigh PSRR Linear Regulator, MSOP-12"
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "8e44af54-bb3f-496b-9d07-fe7584717a56")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "LCSC" "C666577"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "4ffa2d79-3459-4275-b429-5f27b3175d47")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "PN" "LT3045EMSE#TRPBF"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "018ac11e-85c8-48ae-9be7-9f59a91975af")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "MFR" "Analog Devices"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "b1db506e-31ed-4e44-809a-efa9b80492e2")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property ki_fp_filters "MSOP*1EP*3x4.039mm*P0.65mm*")
	(units
		(unit (name "A") (pins "1" "2" "3" "4" "6" "8" "9" "13" "11" "12" "10" "7" "5"))
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start 1.61 2.1295)
		(end -1.61 2.1295)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "1eda9010-17ef-44d3-a71d-418bfc163bed")
	)
	(fp_line
		(start 1.61 2.085001)
		(end 1.61 2.1295)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "84127227-8ded-4599-9c16-ad494ab19076")
	)
	(fp_line
		(start 1.61 -2.1295)
		(end 1.61 -2.085001)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "81314d16-947d-4f2a-988b-26bfb6ce6370")
	)
	(fp_line
		(start -1.61 2.1295)
		(end -1.61 2.085001)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "ea8a4d2c-ed00-4966-94e6-d97e18ca5b7e")
	)
	(fp_line
		(start -1.61 -2.085001)
		(end -1.61 -2.1295)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "182422be-1b91-4085-80c8-d3b560c97ed1")
	)
	(fp_line
		(start -1.61 -2.1295)
		(end 1.61 -2.1295)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "9a8c270a-b5b2-4a3f-9f71-7c11d11eb947")
	)
	(fp_poly
		(pts (xy -2.16 -2.09) (xy -2.4 -2.42) (xy -1.92 -2.419999))
		(stroke (width 0.12) (type solid))
		(fill yes)
		(layer "F.SilkS")
		(uuid "0bcf9027-b15d-4554-9a4c-0880b69a7463")
	)
	(fp_line
		(start 3.13 2.08)
		(end 1.75 2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "04b3636d-c9eb-4dc5-b5d2-07ff18f3c443")
	)
	(fp_line
		(start 3.13 -2.08)
		(end 3.13 2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "2d7f72bf-816a-404c-8354-71e4212a1dba")
	)
	(fp_line
		(start 1.75 2.08)
		(end 1.749999 2.27)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "8afd3659-84b4-443f-852b-90ea4842ef35")
	)
	(fp_line
		(start 1.75 -2.08)
		(end 3.13 -2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "dc13fea5-5a84-47ab-b413-a43a60479cd7")
	)
	(fp_line
		(start 1.749999 2.27)
		(end -1.749999 2.27)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "10ecf3ea-440a-40e1-90b7-b874af2c830c")
	)
	(fp_line
		(start 1.749999 -2.27)
		(end 1.75 -2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "2e938709-54bb-4fa1-9207-10a8b5b1cfed")
	)
	(fp_line
		(start -1.749999 2.27)
		(end -1.75 2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "1420724e-d507-48e5-a108-8ddf2525ef4c")
	)
	(fp_line
		(start -1.749999 -2.27)
		(end 1.749999 -2.27)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "076f0187-0d0c-4d3d-bdbb-fd0e0292b9a2")
	)
	(fp_line
		(start -1.75 2.08)
		(end -3.13 2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "3337b34a-6839-41c7-8d29-56b496047319")
	)
	(fp_line
		(start -1.75 -2.08)
		(end -1.749999 -2.27)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "0ed61bcb-b7c3-427c-b106-728896f8e9e1")
	)
	(fp_line
		(start -3.13 2.08)
		(end -3.13 -2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "7980f578-488a-4b3c-97dd-69753280072e")
	)
	(fp_line
		(start -3.13 -2.08)
		(end -1.75 -2.08)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "d27d9849-22fd-46c9-9f4a-dbe3de06f18d")
	)
	(fp_poly
		(pts (xy -0.75 -2.0195) (xy 1.5 -2.0195) (xy 1.5 2.0195) (xy -1.5 2.0195) (xy -1.5 -1.2695))
		(stroke (width 0.1) (type solid))
		(fill no)
		(layer "F.Fab")
		(uuid "f749dc38-9a57-4553-9bb6-482f93cf92de")
	)
	(pad "" smd roundrect
		(at -0.415 -0.71)
		(size 0.67 1.15)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "" smd roundrect
		(at -0.415 0.71)
		(size 0.67 1.15)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "" smd roundrect
		(at 0.415 -0.71)
		(size 0.67 1.15)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "" smd roundrect
		(at 0.415 0.71)
		(size 0.67 1.15)
		(layers "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "1" smd roundrect
		(at -2.15 -1.625)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "2" smd roundrect
		(at -2.15 -0.975001)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "3" smd roundrect
		(at -2.15 -0.325)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "4" smd roundrect
		(at -2.15 0.325)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "5" smd roundrect
		(at -2.15 0.975001)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "6" smd roundrect
		(at -2.15 1.625)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "7" smd roundrect
		(at 2.15 1.625)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "8" smd roundrect
		(at 2.15 0.975001)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "9" smd roundrect
		(at 2.15 0.325)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "10" smd roundrect
		(at 2.15 -0.325)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "11" smd roundrect
		(at 2.15 -0.975001)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "12" smd roundrect
		(at 2.15 -1.625)
		(size 1.45 0.4)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.25)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "13" smd rect
		(at 0 0)
		(size 1.651 2.845)
		(property pad_prop_heatsink)
		(layers "F.Cu" "F.Mask")
		(zone_connect 2)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/MSOP-12-1EP_3x4.039mm_P0.65mm_EP1.651x2.845mm.step"
		(offset (xyz 0 0 0))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)