component

LT3045EMSE#TRPBF

Public Made by Adom

by adom

Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, MSOP-12-EP. KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentpower management (pmic)lt3045emse-trpbfboard-derived

Verified LT3045EMSE#TRPBF

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 2 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against Analog Devices' LT3045 datasheet (Rev. D, 11/22)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet replaced: the page carried a JLCPCB copy (tier lcsc, Rev. B); now ADI's Rev. D (11/22, 32 pages) from analog.com/media/en/technical-documentation/data-sheets/lt3045.pdf, fetched 2026-10-27
  • ✓Orderable LT3045EMSE#TRPBF is the tape-and-reel 12-lead plastic MSOP (MSE), marking 3045, -40 to 125 °C (Order Information, p.2)
  • ✓All 13 pins match the MSE pin configuration (p.2) and Pin Functions (p.12-13) by number and name: IN 1/2/3, EN/UV 4, PG 5, ILIM 6, PGFB 7, SET 8, GND 9, OUTS 10, OUT 11/12, exposed pad 13 = GND ('EXPOSED PAD (PIN 13) IS GND, MUST BE SOLDERED TO PCB'); no renames needed
  • ✓Pin types: IN power_in, EN/UV and PGFB input, PG open_collector (open-collector flag), OUTS input (error amplifier input), OUT power_out, GND power_in; ILIM (programming pin that sources a current) and SET (error amplifier input that sources 100µA) kept passive
  • •Shared pins: pins 2/3 (IN), 12 (OUT) and 13 (GND, exposed pad) are hidden pins stacked at the same coordinates as visible pins 1, 11 and 9, and are typed passive. This is KiCad's stacked-pin convention: a hidden power_in pin would join an implicit global net named after the pin, and stacked power_out pins would conflict in ERC. The visible pin of each stack has the datasheet's type, so each net has one power_in, power_out or power_in pin
  • ✓All 13 descriptions rewritten from Pin Functions (p.12-13). The old text was copied across stacked pins: pins 2 and 3 said 'shared with pins 2 and 3' and pin 12 said 'shared with pin 12'; now every IN pin says 'pins 1, 2, 3' and every OUT pin 'pins 11, 12'. Dropped values that are not in the pin functions (1.8V to 20V range, ±22V, 1.18V, 500mA)
  • ✓Footprint vs MSE package 05-08-1666 Rev G (p.30): 12 pads at e = 0.65 mm, pin 1 top-left, 1-6 down the left, 7-12 up the right, as the p.2 top view; pads 1.45 x 0.40 at x = ±2.15 against ADI's recommended 0.889 ±0.127 x 0.42 ±0.038 (inner edges 3.20-3.45 apart, outer span 5.10 min); the KiCad pads are longer (inner edges 2.85 apart, outer span 5.75) and 0.40 wide (within 0.382-0.458), and cover the leads: tips at 4.90 ±0.152 span, foot 0.53 ±0.152, lead width 0.22-0.38
  • ✓Exposed pad 13: 1.651 x 2.845 mm at the centre, long side along the lead rows, equal to the drawing's 1.651 ±0.102 x 2.845 ±0.102 and ADI's recommended pad; copper and mask, with four 0.67 x 1.15 paste windows
  • ✓3D body 4.90 x 4.039 x 0.95 mm against lead span 4.90 ±0.152, body 4.039 ±0.102 (and 3.00 ±0.102 across), height 1.10 max (p.30); seated on z = 0, centred on the pads, pin-1 dot at the top-left corner (matching GLB)
  • ✓DigiKey 505-LT3045EMSE#TRPBFTR-ND (tape and reel; DigiKey product URL names LT3045EMSE-TRPBF) and Mouser 584-LT3045EMSE#TRPBF kept and added to specs
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Analog Devices)
Verified files✓ lt3045emse-trpbf.kicad_sym✓ lt3045emse-trpbf.kicad_mod✓ lt3045emse-trpbf.step
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓13 of 13 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! lt3045emse-trpbf.kicad_sym! lt3045emse-trpbf.kicad_mod✓ lt3045emse-trpbf.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
lt3045emse-trpbf / lt3045emse-trpbf-hero.overlay.json
HistoryDownload
Caleb Publish 0.1.1 8c62b67 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361
{
  "spec": "adom-hero 1.4",
  "mpn": "LT3045EMSE#TRPBF",
  "kind": "component + footprint reference art",
  "board_use": false,
  "plane_z_mm": -0.02,
  "units": "metre",
  "upAxis": "Z",
  "layers": {
    "pad_outlines": {
      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",
      "rgba": [
        0.0,
        0.902,
        0.863,
        0.5
      ],
      "pads": 13,
      "span_mm": 6.095,
      "dash_mm": 0.1524,
      "gap_mm": 0.0914,
      "pad_stroke_mm": 0.0366
    },
    "silkscreen": {
      "material": "Silkscreen reference lines - 30 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.3
      ],
      "footprint_items": 7,
      "pin1": {
        "source": "footprint silkscreen",
        "pad": "1"
      }
    },
    "signal_names": {
      "material": "Signal names - 50 percent opacity",
      "rgba": [
        0.92,
        0.96,
        1.0,
        0.5
      ],
      "font": "DejaVu Sans Mono",
      "labels": 12,
      "sides": "top + mirrored underside (single-sided)",
      "fallback_to_pad_number": 0
    }
  },
  "align": {
    "ok": true,
    "centre_offset_mm": 0.0,
    "tolerance_mm": 0.46,
    "orientation_flipped": false,
    "contacts_bbox_mm": [
      -2.45,
      2.45,
      -1.775,
      1.775
    ],
    "pads_bbox_mm": [
      -2.875,
      2.875,
      -1.825,
      1.825
    ],
    "seating_z_mm": 0.0
  },
  "sources": {
    "glb": "lt3045emse-trpbf-etched.glb",
    "glb_sha256": "13b9f21368368fd5bed9025df7ed03f377738f8038e31bd4956ae623ef790b4c",
    "footprint": "lt3045emse-trpbf.kicad_mod",
    "footprint_sha256": "47e0e1ae3082f1369bab49f8a8a3562ede49244ad85723df2414a3d6cc76f9b0",
    "pins": "page.json component.pins",
    "pins_sha256": "1767bcbbe19a93c82d100169ec9c8825475ac5f591f2c55485f7bb639a9e7434"
  },
  "generator": "adom-wiki 1.8.0 (component_hero)",
  "labels": [
    {
      "pad": "1",
      "text": "IN",
      "x": -2.975,
      "y": -1.625,
      "align": "right",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "2",
      "text": "IN",
      "x": -2.975,
      "y": -0.975,
      "align": "right",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "3",
      "text": "IN",
      "x": -2.975,
      "y": -0.325,
      "align": "right",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "4",
      "text": "EN/UV",
      "x": -2.975,
      "y": 0.325,
      "align": "right",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "5",
      "text": "PG",
      "x": -2.975,
      "y": 0.975,
      "align": "right",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "6",
      "text": "ILIM",
      "x": -2.975,
      "y": 1.625,
      "align": "right",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "7",
      "text": "PGFB",
      "x": 2.975,
      "y": 1.625,
      "align": "left",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "8",
      "text": "SET",
      "x": 2.975,
      "y": 0.975,
      "align": "left",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "9",
      "text": "GND",
      "x": 2.975,
      "y": 0.325,
      "align": "left",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "10",
      "text": "OUTS",
      "x": 2.975,
      "y": -0.325,
      "align": "left",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "11",
      "text": "OUT",
      "x": 2.975,
      "y": -0.975,
      "align": "left",
      "vertical": false,
      "h": 0.325
    },
    {
      "pad": "12",
      "text": "OUT",
      "x": 2.975,
      "y": -1.625,
      "align": "left",
      "vertical": false,
      "h": 0.325
    }
  ],
  "pads": [
    {
      "number": "1",
      "shape": "roundrect",
      "center_mm": [
        -2.15,
        -1.625
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "2",
      "shape": "roundrect",
      "center_mm": [
        -2.15,
        -0.975001
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "3",
      "shape": "roundrect",
      "center_mm": [
        -2.15,
        -0.325
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "4",
      "shape": "roundrect",
      "center_mm": [
        -2.15,
        0.325
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "5",
      "shape": "roundrect",
      "center_mm": [
        -2.15,
        0.975001
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "6",
      "shape": "roundrect",
      "center_mm": [
        -2.15,
        1.625
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "7",
      "shape": "roundrect",
      "center_mm": [
        2.15,
        1.625
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "8",
      "shape": "roundrect",
      "center_mm": [
        2.15,
        0.975001
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "9",
      "shape": "roundrect",
      "center_mm": [
        2.15,
        0.325
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "10",
      "shape": "roundrect",
      "center_mm": [
        2.15,
        -0.325
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "11",
      "shape": "roundrect",
      "center_mm": [
        2.15,
        -0.975001
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "12",
      "shape": "roundrect",
      "center_mm": [
        2.15,
        -1.625
      ],
      "size_mm": [
        1.45,
        0.4
      ],
      "rot": 0.0
    },
    {
      "number": "13",
      "shape": "rect",
      "center_mm": [
        0.0,
        0.0
      ],
      "size_mm": [
        1.651,
        2.845
      ],
      "rot": 0.0
    }
  ]
}