component
LT3027EMSE#PBF
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210
{
"slug": "lt3027emse-pbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Pre-ordered Chips, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"lt3027emse#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3027emse-pbf.kicad_sym",
"lt3027emse-pbf.kicad_mod",
"lt3027emse-pbf.glb",
"lt3027emse-pbf.step",
"lt3027emse-pbf.lbr",
"docs/hero.png",
"docs/lt3027emse-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3027emse-pbf-hero.glb",
"lt3027emse-pbf-hero.overlay.json",
"lt3027emse-pbf-etched.glb"
],
"component": {
"mpn": "LT3027EMSE#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-10-EP",
"pin_count": 11,
"category": "Interface ICs",
"subcategory": "Pre-ordered Chips",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3027fa.pdf",
"parts": {
"symbol": "lt3027emse-pbf.kicad_sym",
"footprint": "lt3027emse-pbf.kicad_mod",
"model_3d": "lt3027emse-pbf-hero.glb",
"model_3d_plain": "lt3027emse-pbf-etched.glb",
"model_3d_step": "lt3027emse-pbf-etched.step",
"model_3d_step_plain": "lt3027emse-pbf.step",
"lbr": "lt3027emse-pbf.lbr"
},
"distributor_links": {
"lcsc": "C666486",
"digikey": "505-LT3027EMSE#PBF-ND",
"mouser": "584-LT3027EMSE#PBF"
},
"distributor_check": {
"checked_at": "2026-11-02T17:27:21Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT3027EMSE#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3027EMSE#PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "BYP2",
"type": "passive",
"description": "Channel 2 reference bypass pin, clamped internally to ±0.6V from ground, with a maximum 0.01µF capacitor recommended for 20µVRMS noise, and must be left unconnected if not used."
},
{
"number": "2",
"name": "ADJ2",
"type": "input",
"description": "Channel 2 error amplifier input, internally clamped to ±7V, with a 30nA bias current flowing into the pin and regulating to 1.22V referenced to ground for an output range of 1.22V to 20V."
},
{
"number": "3",
"name": "SHDN2",
"type": "input",
"description": "Channel 2 shutdown control, where the output turns off when pulled low, must be connected to VIN if unused, and draws a typical pin current of 1µA."
},
{
"number": "4",
"name": "ADJ1",
"type": "input",
"description": "Channel 1 error amplifier input, internally clamped to ±7V, with a 30nA bias current flowing into the pin and regulating to 1.22V referenced to ground for an output range of 1.22V to 20V."
},
{
"number": "5",
"name": "BYP1",
"type": "passive",
"description": "Channel 1 reference bypass pin, clamped internally to ±0.6V from ground, with a maximum 0.01µF capacitor recommended for 20µVRMS noise, and must be left unconnected if not used."
},
{
"number": "6",
"name": "OUT1",
"type": "power_out",
"description": "Channel 1 regulated output, which requires a minimum 1µF output capacitor to prevent oscillations."
},
{
"number": "7",
"name": "SHDN1",
"type": "input",
"description": "Channel 1 shutdown control, where the output turns off when pulled low, must be connected to VIN if unused, and draws a typical pin current of 1µA."
},
{
"number": "8",
"name": "IN1",
"type": "power_in",
"description": "Channel 1 input supply operating from 1.8V to 20V, which withstands reverse voltages of 20V and benefits from a 1µF to 10µF bypass capacitor when far from the input filter."
},
{
"number": "9",
"name": "IN2",
"type": "power_in",
"description": "Channel 2 input supply operating from 1.8V to 20V, which withstands reverse voltages of 20V and benefits from a 1µF to 10µF bypass capacitor when far from the input filter."
},
{
"number": "10",
"name": "OUT2",
"type": "power_out",
"description": "Channel 2 regulated output, which requires a minimum 1µF output capacitor to prevent oscillations."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Exposed pad ground that must be soldered to the PCB and electrically connected to ground."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 16,
"cost_usd": 0.0304,
"at": "2026-11-02T17:27:13"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3027fa.pdf",
"pages": 16,
"sha256": "0a3b3d970fde50f1",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3027emse-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3027emse-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f92e4be93b640530cff4f13c841df80313fc9917f43e461d468daa8c064659a1",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}