LT3013EFE#PBF

{
  "schema_version": 1,
  "type": "component",
  "slug": "lt3013efe-pbf",
  "title": "LT3013EFE#PBF",
  "brief": "Analog Devices Pre-ordered Chips, TSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface ics",
    "lt3013efe#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LT3013EFE#PBF",
    "manufacturer": "Analog Devices",
    "package": "TSSOP-16-EP",
    "pin_count": 17,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3013fe.pdf",
    "parts": {
      "symbol": "lt3013efe-pbf.kicad_sym",
      "footprint": "lt3013efe-pbf.kicad_mod",
      "model_3d": "lt3013efe-pbf-hero.glb",
      "model_3d_plain": "lt3013efe-pbf-etched.glb",
      "model_3d_step": "lt3013efe-pbf-etched.step",
      "model_3d_step_plain": "lt3013efe-pbf.step",
      "lbr": "lt3013efe-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C666241",
      "digikey": "LT3013EFE#PBF-ND",
      "mouser": "584-LT3013EFE#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T16:49:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3013EFE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3013EFE#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; the exposed pad is the electrical GND connection and must be soldered directly to the PC board."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; connecting to a copper area can slightly improve thermal performance."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output supplying the load; a minimum 3.3μF output capacitor is required to prevent oscillations."
      },
      {
        "number": "4",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output supplying the load; a minimum 3.3μF output capacitor is required to prevent oscillations."
      },
      {
        "number": "5",
        "name": "ADJ",
        "type": "input",
        "description": "Error amplifier input held at 1.24V referenced to ground, internally clamped to ±7V, with a 30nA bias current flowing into the pin; output range is 1.24V to 60V."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, connected to the exposed pad on the PC board."
      },
      {
        "number": "7",
        "name": "PWRGD",
        "type": "output",
        "description": "Open-collector power-good flag with no internal pull-up, going high-impedance when output is above 90% of nominal and the CT capacitor has charged; maximum pull-down current in the low state is 50μA and the pin voltage rating is 80V to -0.5V."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "10",
        "name": "CT",
        "type": "passive",
        "description": "Timing capacitor pin that sets the delay between the output reaching the PWRGD threshold and PWRGD going high-impedance; charging current is 3μA and the pin voltage rating is 7V to -0.5V."
      },
      {
        "number": "11",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown input that turns the output off when pulled low; if unused it must be tied to a logic high or VIN, with an input voltage rating of ±80V."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; connecting to a copper area can slightly improve thermal performance."
      },
      {
        "number": "13",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin with a 4V minimum input voltage; a 1μF to 10μF bypass capacitor is recommended when the device is far from the input filter capacitor, and the pin is rated ±80V."
      },
      {
        "number": "14",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin with a 4V minimum input voltage; a 1μF to 10μF bypass capacitor is recommended when the device is far from the input filter capacitor, and the pin is rated ±80V."
      },
      {
        "number": "15",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; connecting to a copper area can slightly improve thermal performance."
      },
      {
        "number": "16",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed backside pad, an electrical connection for GND that must be soldered to the PC board for thermal and electrical performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The PIN CONFIGURATION drawing text on page 2 lists the TSSOP pin names in an order that does not map; Pin 17 is the exposed pad and is labelled GND on the datasheet; it is included as a numbered pin per"
        ],
        "pages_sent": 6,
        "cost_usd": 0.054,
        "at": "2026-10-30T16:49:14"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3013fe.pdf",
        "pages": 20,
        "sha256": "285ab2e67f086b18",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3013efe-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3013efe-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "aac3695a66ba3858ebf4227aaebab13b4ee2b10af244b611fa0925a412041983",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "FE16 (TSSOP-16 exposed pad variation BB)",
      "source_page": 19,
      "D": {
        "nom_mm": 5,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3013efe-pbf.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Analog Devices",
      "Package": "TSSOP-16-EP",
      "Category": "Interface ICs",
      "Pins": "17"
    },
    "appearance": {
      "contacts": {
        "quote": "pins have no internal connection; connecting NC pins to a copper area for heat dissipation provides a small",
        "page": 11,
        "doc": "ds.pdf",
        "material": "copper"
      },
      "version": 1,
      "datasheet_sha256": "285ab2e67f086b183737c2b96080acf482c423d7170b8017768f2ae16d614103"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "285ab2e67f086b183737c2b96080acf482c423d7170b8017768f2ae16d614103",
      "rows": [
        {
          "name": "Minimum Input Voltage (ILOAD = 250mA)",
          "symbol": "",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 4,
          "max": 4.75,
          "conditions": "ILOAD = 250mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "ADJ Pin Voltage",
          "symbol": "VADJ",
          "kind": "electrical",
          "unit": "V",
          "min": 1.225,
          "typ": 1.24,
          "max": 1.255,
          "conditions": "VIN = 4V, ILOAD = 1mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "ADJ Pin Voltage",
          "symbol": "VADJ",
          "kind": "electrical",
          "unit": "V",
          "min": 1.2,
          "typ": 1.24,
          "max": 1.28,
          "conditions": "4.75V < VIN < 80V, 1mA < ILOAD < 250mA (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Line Regulation",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 0.1,
          "max": 5,
          "conditions": "ΔVIN = 4V to 80V, ILOAD = 1mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Load Regulation",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 7,
          "max": 12,
          "conditions": "VIN = 4.75V, ΔILOAD = 1mA to 250mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Load Regulation",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "VIN = 4.75V, ΔILOAD = 1mA to 250mA (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Dropout Voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 160,
          "max": 230,
          "conditions": "VIN = VOUT(NOMINAL), ILOAD = 10mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Dropout Voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "VIN = VOUT(NOMINAL), ILOAD = 10mA (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Dropout Voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 250,
          "max": 340,
          "conditions": "VIN = VOUT(NOMINAL), ILOAD = 50mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Dropout Voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 420,
          "conditions": "VIN = VOUT(NOMINAL), ILOAD = 50mA (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Dropout Voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 400,
          "max": 490,
          "conditions": "VIN = VOUT(NOMINAL), ILOAD = 250mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Dropout Voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": null,
          "max": 620,
          "conditions": "VIN = VOUT(NOMINAL), ILOAD = 250mA (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "GND Pin Current",
          "symbol": "",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 65,
          "max": 120,
          "conditions": "VIN = 4.75V, ILOAD = 0mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "GND Pin Current",
          "symbol": "",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3,
          "max": null,
          "conditions": "VIN = 4.75V, ILOAD = 100mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "GND Pin Current",
          "symbol": "",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 10,
          "max": 18,
          "conditions": "VIN = 4.75V, ILOAD = 250mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "ADJ Pin Bias Current",
          "symbol": "IADJ",
          "kind": "electrical",
          "unit": "nA",
          "min": null,
          "typ": 30,
          "max": 100,
          "conditions": "",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Shutdown Threshold (VOUT Off to On)",
          "symbol": "",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": 1.3,
          "max": 2,
          "conditions": "VOUT = Off to On",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Shutdown Threshold (VOUT On to Off)",
          "symbol": "",
          "kind": "electrical",
          "unit": "V",
          "min": 0.3,
          "typ": 0.8,
          "max": null,
          "conditions": "VOUT = On to Off",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "SHDN Pin Current",
          "symbol": "",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.3,
          "max": 2,
          "conditions": "VSHDN = 0V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "SHDN Pin Current",
          "symbol": "",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 0.1,
          "max": 1,
          "conditions": "VSHDN = 6V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Quiescent Current in Shutdown",
          "symbol": "",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 1,
          "max": 5,
          "conditions": "VIN = 6V, VSHDN = 0V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "PWRGD Trip Point",
          "symbol": "",
          "kind": "electrical",
          "unit": "%",
          "min": 85,
          "typ": 90,
          "max": 94,
          "conditions": "% of nominal output voltage, output rising (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "PWRGD Output Low Voltage",
          "symbol": "",
          "kind": "electrical",
          "unit": "mV",
          "min": null,
          "typ": 140,
          "max": 250,
          "conditions": "IPWRGD = 50μA (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Ripple Rejection",
          "symbol": "",
          "kind": "electrical",
          "unit": "dB",
          "min": 65,
          "typ": 75,
          "max": null,
          "conditions": "VIN = 7V(Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 250mA",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Current Limit",
          "symbol": "",
          "kind": "electrical",
          "unit": "mA",
          "min": 250,
          "typ": null,
          "max": null,
          "conditions": "VIN = 4.75V, ΔVOUT = –0.1V (over full operating temperature range)",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "Reverse Output Current",
          "symbol": "",
          "kind": "electrical",
          "unit": "μA",
          "min": null,
          "typ": 12,
          "max": 25,
          "conditions": "VOUT = 1.24V, VIN < 1.24V",
          "source_page": 3,
          "source": "datasheet"
        },
        {
          "name": "IN Pin Voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -80,
          "typ": null,
          "max": 80,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "OUT Pin Voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -60,
          "typ": null,
          "max": 60,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "IN to OUT Differential Voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -80,
          "typ": null,
          "max": 80,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "ADJ Pin Voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -7,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "SHDN Pin Input Voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -80,
          "typ": null,
          "max": 80,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "CT Pin Voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 7,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "PWRGD Pin Voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.5,
          "typ": null,
          "max": 80,
          "conditions": "",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Storage Temperature Range (TSSOP Package)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "TSSOP package",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Lead Temperature",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "FE16 soldering, 10 sec",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Operating Junction Temperature Range (LT3013E)",
          "symbol": "TJ",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 125,
          "conditions": "LT3013E (Notes 3, 10, 11)",
          "source_page": 2,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction-to-Ambient (TSSOP measured)",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 40,
          "max": null,
          "conditions": "2500 sq mm copper area, 2500 sq mm topside board area, still air, 3/32 in FR-4",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction-to-Ambient (TSSOP measured)",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 45,
          "max": null,
          "conditions": "1000 sq mm copper area, 2500 sq mm topside board area, still air",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction-to-Ambient (TSSOP measured)",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 50,
          "max": null,
          "conditions": "225 sq mm copper area, 2500 sq mm topside board area, still air",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction-to-Ambient (TSSOP measured)",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 62,
          "max": null,
          "conditions": "100 sq mm copper area, 2500 sq mm topside board area, still air",
          "source_page": 15,
          "source": "datasheet"
        },
        {
          "name": "Thermal Resistance, Junction-to-Case (exposed pad)",
          "symbol": "θJC",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 16,
          "max": null,
          "conditions": "measured at exposed pad on back of die",
          "source_page": 15,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lt3013efe#pbf"
  ],
  "discovery_pitch": "LT3013EFE#PBF (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3013efe-pbf.kicad_sym",
    "lt3013efe-pbf.kicad_mod",
    "lt3013efe-pbf.glb",
    "lt3013efe-pbf.step",
    "lt3013efe-pbf.lbr",
    "docs/hero.png",
    "docs/lt3013efe-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3013efe-pbf-hero.glb",
    "lt3013efe-pbf-hero.overlay.json",
    "lt3013efe-pbf-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}