main
Ray
Publish 0.1.0
f29aeb0
LT3010MPMS8E#TRPBF
Analog Devices · Pre-ordered Chips · MSOP-8-EP
LT3010MPMS8E#TRPBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Output pin that supplies power to the load and needs a minimum output capacitor of 1µF to prevent oscillations. |
| 2 | ADJ | input | Error amplifier input for the adjustable LT3010, internally clamped to ±7V, with a 50nA bias current flowing into the pin and a 1.275V reference, giving an output range of 1.275V to 60V. |
| 3 | NC | unconnected | No connection; may be floated, tied to IN or tied to GND. |
| 4 | GND | power_in | Ground pin, which must be connected directly to pin 9 (exposed pad) on the PC board. |
| 5 | SHDN | input | Shutdown input; the output is off when SHDN is pulled low, its input voltage is rated ±80V, and if unused it must be tied to a logic high or VIN. |
| 6 | NC | unconnected | No connection; may be floated, tied to IN or tied to GND. |
| 7 | NC | unconnected | No connection; may be floated, tied to IN or tied to GND. |
| 8 | IN | power_in | Input pin that supplies power to the device, rated ±80V on the IN pin, with the device designed to withstand reverse input voltages. |
| 9 | GND | power_in | Exposed backside pad is the GND electrical connection, must be soldered to the PCB and connected directly to pin 4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Interface ICs |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | 3 | 4 | V | LT3010, ILOAD = 50mA | 3 | ||
| ADJ Pin Voltage | VADJ | 1.258 | 1.275 | 1.292 | V | LT3010, VIN = 3V, ILOAD = 1mA | 3 |
| ADJ Pin Voltage | VADJ | 1.237 | 1.275 | 1.313 | V | LT3010, 4V < VIN < 80V, 1mA < ILOAD < 50mA, over operating temperature range | 3 |
| Line Regulation | 3 | 13 | mV | LT3010, ΔVIN = 3V to 80V, ILOAD = 1mA | 3 | ||
| Load Regulation | 10 | 20 | mV | LT3010, VIN = 4V, ΔILOAD = 1mA to 50mA | 3 | ||
| Load Regulation | 32 | mV | LT3010, VIN = 4V, ΔILOAD = 1mA to 50mA, over operating temperature range | 3 | |||
| Dropout Voltage | VDO | 100 | 150 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA | 3 | |
| Dropout Voltage | VDO | 100 | 190 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA, over operating temperature range | 3 | |
| Dropout Voltage | VDO | 200 | 260 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA | 3 | |
| Dropout Voltage | VDO | 200 | 350 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA, over operating temperature range | 3 | |
| Dropout Voltage | VDO | 300 | 370 | mV | VIN = VOUT(NOMINAL), ILOAD = 50mA | 3 | |
| Dropout Voltage | VDO | 300 | 550 | mV | VIN = VOUT(NOMINAL), ILOAD = 50mA, over operating temperature range | 3 | |
| GND Pin Current | IGND | 30 | 60 | µA | VIN = VOUT(NOMINAL), ILOAD = 0mA | 3 | |
| GND Pin Current | IGND | 100 | 180 | µA | VIN = VOUT(NOMINAL), ILOAD = 1mA | 3 | |
| GND Pin Current | IGND | 400 | 700 | µA | VIN = VOUT(NOMINAL), ILOAD = 10mA | 3 | |
| GND Pin Current | IGND | 1.8 | 3.3 | mA | VIN = VOUT(NOMINAL), ILOAD = 50mA | 3 | |
| Output Voltage Noise | 100 | µVRMS | COUT = 10µF, ILOAD = 50mA, BW = 10Hz to 100kHz | 3 | |||
| ADJ Pin Bias Current | IADJ | 50 | 100 | nA | 3 | ||
| Shutdown Threshold (Off to On) | VSHDN | 0.3 | 1.3 | V | VOUT = Off to On, over operating temperature range | 3 | |
| Shutdown Threshold (On to Off) | VSHDN | 1.1 | 2 | V | VOUT = On to Off, over operating temperature range | 3 | |
| SHDN Pin Current | ISHDN | 0.5 | 2 | µA | VSHDN = 0V | 3 | |
| SHDN Pin Current | ISHDN | 0.1 | 0.5 | µA | VSHDN = 6V | 3 | |
| Quiescent Current in Shutdown | IQ(SHDN) | 1 | 5 | µA | VIN = 6V, VSHDN = 0V | 3 | |
| Ripple Rejection | 65 | 75 | dB | LT3010, VIN = 7V(Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA | 3 | ||
| Current Limit | ILIM | 60 | 140 | mA | LT3010, VIN = 4V, ΔVOUT = -0.1V | 3 | |
| Input Reverse Leakage Current | 6 | mA | VIN = -80V, VOUT = 0V | 3 | |||
| Reverse Output Current | 8 | 15 | µA | LT3010, VOUT = 1.275V, VIN < 1.275V | 3 | ||
| IN Pin Voltage | VIN | -80 | 80 | V | 2 | ||
| OUT Pin Voltage | VOUT | -60 | 60 | V | 2 | ||
| IN to OUT Differential Voltage | -80 | 80 | V | 2 | |||
| ADJ Pin Voltage | VADJ | -7 | 7 | V | 2 | ||
| SHDN Pin Input Voltage | VSHDN | -80 | 80 | V | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Operating Junction Temperature Range | TJ | -55 | 125 | °C | LT3010MP | 2 | |
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 sec soldering | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 40 | °C/W | TJMAX = 125°C (LT3010E/LT3010MP), 2500 sq mm topside and backside copper | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 16 | °C/W | Measured at bottom (exposed) pad | 2 | ||
| Thermal Resistance Junction-to-Ambient (board range) | θJA | 40 | 62 | °C/W | Still air, 3/32in FR-4, 2500 sq mm to 100 sq mm copper area | 10 |
CAD (KiCad official)
- Symbol:
LT3010MPMS8E#TRPBF - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lt3010mpms8e-trpbf-etched.step/lt3010mpms8e-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3010mpms8e-trpbf.step/lt3010mpms8e-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
c6cfb56a14f03a81, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT3010MPMS8E#TRPBF
**Analog Devices** · Pre-ordered Chips · MSOP-8-EP
LT3010MPMS8E#TRPBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Output pin that supplies power to the load and needs a minimum output capacitor of 1µF to prevent oscillations. |
| 2 | ADJ | input | Error amplifier input for the adjustable LT3010, internally clamped to ±7V, with a 50nA bias current flowing into the pin and a 1.275V reference, giving an output range of 1.275V to 60V. |
| 3 | NC | unconnected | No connection; may be floated, tied to IN or tied to GND. |
| 4 | GND | power_in | Ground pin, which must be connected directly to pin 9 (exposed pad) on the PC board. |
| 5 | SHDN | input | Shutdown input; the output is off when SHDN is pulled low, its input voltage is rated ±80V, and if unused it must be tied to a logic high or VIN. |
| 6 | NC | unconnected | No connection; may be floated, tied to IN or tied to GND. |
| 7 | NC | unconnected | No connection; may be floated, tied to IN or tied to GND. |
| 8 | IN | power_in | Input pin that supplies power to the device, rated ±80V on the IN pin, with the device designed to withstand reverse input voltages. |
| 9 | GND | power_in | Exposed backside pad is the GND electrical connection, must be soldered to the PCB and connected directly to pin 4. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Interface ICs |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | | | 3 | 4 | V | LT3010, ILOAD = 50mA | 3 |
| ADJ Pin Voltage | VADJ | 1.258 | 1.275 | 1.292 | V | LT3010, VIN = 3V, ILOAD = 1mA | 3 |
| ADJ Pin Voltage | VADJ | 1.237 | 1.275 | 1.313 | V | LT3010, 4V < VIN < 80V, 1mA < ILOAD < 50mA, over operating temperature range | 3 |
| Line Regulation | | | 3 | 13 | mV | LT3010, ΔVIN = 3V to 80V, ILOAD = 1mA | 3 |
| Load Regulation | | | 10 | 20 | mV | LT3010, VIN = 4V, ΔILOAD = 1mA to 50mA | 3 |
| Load Regulation | | | | 32 | mV | LT3010, VIN = 4V, ΔILOAD = 1mA to 50mA, over operating temperature range | 3 |
| Dropout Voltage | VDO | | 100 | 150 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA | 3 |
| Dropout Voltage | VDO | | 100 | 190 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA, over operating temperature range | 3 |
| Dropout Voltage | VDO | | 200 | 260 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA | 3 |
| Dropout Voltage | VDO | | 200 | 350 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA, over operating temperature range | 3 |
| Dropout Voltage | VDO | | 300 | 370 | mV | VIN = VOUT(NOMINAL), ILOAD = 50mA | 3 |
| Dropout Voltage | VDO | | 300 | 550 | mV | VIN = VOUT(NOMINAL), ILOAD = 50mA, over operating temperature range | 3 |
| GND Pin Current | IGND | | 30 | 60 | µA | VIN = VOUT(NOMINAL), ILOAD = 0mA | 3 |
| GND Pin Current | IGND | | 100 | 180 | µA | VIN = VOUT(NOMINAL), ILOAD = 1mA | 3 |
| GND Pin Current | IGND | | 400 | 700 | µA | VIN = VOUT(NOMINAL), ILOAD = 10mA | 3 |
| GND Pin Current | IGND | | 1.8 | 3.3 | mA | VIN = VOUT(NOMINAL), ILOAD = 50mA | 3 |
| Output Voltage Noise | | | 100 | | µVRMS | COUT = 10µF, ILOAD = 50mA, BW = 10Hz to 100kHz | 3 |
| ADJ Pin Bias Current | IADJ | | 50 | 100 | nA | | 3 |
| Shutdown Threshold (Off to On) | VSHDN | 0.3 | | 1.3 | V | VOUT = Off to On, over operating temperature range | 3 |
| Shutdown Threshold (On to Off) | VSHDN | 1.1 | | 2 | V | VOUT = On to Off, over operating temperature range | 3 |
| SHDN Pin Current | ISHDN | | 0.5 | 2 | µA | VSHDN = 0V | 3 |
| SHDN Pin Current | ISHDN | | 0.1 | 0.5 | µA | VSHDN = 6V | 3 |
| Quiescent Current in Shutdown | IQ(SHDN) | | 1 | 5 | µA | VIN = 6V, VSHDN = 0V | 3 |
| Ripple Rejection | | 65 | | 75 | dB | LT3010, VIN = 7V(Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA | 3 |
| Current Limit | ILIM | 60 | | 140 | mA | LT3010, VIN = 4V, ΔVOUT = -0.1V | 3 |
| Input Reverse Leakage Current | | | | 6 | mA | VIN = -80V, VOUT = 0V | 3 |
| Reverse Output Current | | | 8 | 15 | µA | LT3010, VOUT = 1.275V, VIN < 1.275V | 3 |
| IN Pin Voltage | VIN | -80 | | 80 | V | | 2 |
| OUT Pin Voltage | VOUT | -60 | | 60 | V | | 2 |
| IN to OUT Differential Voltage | | -80 | | 80 | V | | 2 |
| ADJ Pin Voltage | VADJ | -7 | | 7 | V | | 2 |
| SHDN Pin Input Voltage | VSHDN | -80 | | 80 | V | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Operating Junction Temperature Range | TJ | -55 | | 125 | °C | LT3010MP | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | 10 sec soldering | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 40 | | °C/W | TJMAX = 125°C (LT3010E/LT3010MP), 2500 sq mm topside and backside copper | 2 |
| Thermal Resistance Junction-to-Case | θJC | | 16 | | °C/W | Measured at bottom (exposed) pad | 2 |
| Thermal Resistance Junction-to-Ambient (board range) | θJA | 40 | | 62 | °C/W | Still air, 3/32in FR-4, 2500 sq mm to 100 sq mm copper area | 10 |
## CAD (KiCad official)
- Symbol: `LT3010MPMS8E#TRPBF`
- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`
- 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lt3010mpms8e-trpbf-etched.step` / `lt3010mpms8e-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3010mpms8e-trpbf.step` / `lt3010mpms8e-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt3010-3010-5.pdf) (18 pp, sha256 `c6cfb56a14f03a81`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt3010mpms8e-trpbf-datasheet.pdf)