main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3010mpms8e-trpbf: viewers · Ray
lt3010mpms8e-trpbf-etched.glb Publish 0.1.0 · Ray
lt3010mpms8e-trpbf-etched.step lt3010mpms8e-trpbf: factory component page (tier=mfr) · Ray
lt3010mpms8e-trpbf-hero.glb lt3010mpms8e-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3010mpms8e-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt3010mpms8e-trpbf.glb Publish 0.1.0 · Ray
lt3010mpms8e-trpbf.kicad_mod Publish 0.1.0 · Ray
lt3010mpms8e-trpbf.kicad_sym Publish 0.1.0 · Ray
lt3010mpms8e-trpbf.lbr Publish 0.1.0 · Ray
lt3010mpms8e-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT3010MPMS8E#TRPBF

Analog Devices · Pre-ordered Chips · MSOP-8-EP

LT3010MPMS8E#TRPBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output pin that supplies power to the load and needs a minimum output capacitor of 1µF to prevent oscillations.
2 ADJ input Error amplifier input for the adjustable LT3010, internally clamped to ±7V, with a 50nA bias current flowing into the pin and a 1.275V reference, giving an output range of 1.275V to 60V.
3 NC unconnected No connection; may be floated, tied to IN or tied to GND.
4 GND power_in Ground pin, which must be connected directly to pin 9 (exposed pad) on the PC board.
5 SHDN input Shutdown input; the output is off when SHDN is pulled low, its input voltage is rated ±80V, and if unused it must be tied to a logic high or VIN.
6 NC unconnected No connection; may be floated, tied to IN or tied to GND.
7 NC unconnected No connection; may be floated, tied to IN or tied to GND.
8 IN power_in Input pin that supplies power to the device, rated ±80V on the IN pin, with the device designed to withstand reverse input voltages.
9 GND power_in Exposed backside pad is the GND electrical connection, must be soldered to the PCB and connected directly to pin 4.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8-EP
Category Interface ICs
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage 3 4 V LT3010, ILOAD = 50mA 3
ADJ Pin Voltage VADJ 1.258 1.275 1.292 V LT3010, VIN = 3V, ILOAD = 1mA 3
ADJ Pin Voltage VADJ 1.237 1.275 1.313 V LT3010, 4V < VIN < 80V, 1mA < ILOAD < 50mA, over operating temperature range 3
Line Regulation 3 13 mV LT3010, ΔVIN = 3V to 80V, ILOAD = 1mA 3
Load Regulation 10 20 mV LT3010, VIN = 4V, ΔILOAD = 1mA to 50mA 3
Load Regulation 32 mV LT3010, VIN = 4V, ΔILOAD = 1mA to 50mA, over operating temperature range 3
Dropout Voltage VDO 100 150 mV VIN = VOUT(NOMINAL), ILOAD = 1mA 3
Dropout Voltage VDO 100 190 mV VIN = VOUT(NOMINAL), ILOAD = 1mA, over operating temperature range 3
Dropout Voltage VDO 200 260 mV VIN = VOUT(NOMINAL), ILOAD = 10mA 3
Dropout Voltage VDO 200 350 mV VIN = VOUT(NOMINAL), ILOAD = 10mA, over operating temperature range 3
Dropout Voltage VDO 300 370 mV VIN = VOUT(NOMINAL), ILOAD = 50mA 3
Dropout Voltage VDO 300 550 mV VIN = VOUT(NOMINAL), ILOAD = 50mA, over operating temperature range 3
GND Pin Current IGND 30 60 µA VIN = VOUT(NOMINAL), ILOAD = 0mA 3
GND Pin Current IGND 100 180 µA VIN = VOUT(NOMINAL), ILOAD = 1mA 3
GND Pin Current IGND 400 700 µA VIN = VOUT(NOMINAL), ILOAD = 10mA 3
GND Pin Current IGND 1.8 3.3 mA VIN = VOUT(NOMINAL), ILOAD = 50mA 3
Output Voltage Noise 100 µVRMS COUT = 10µF, ILOAD = 50mA, BW = 10Hz to 100kHz 3
ADJ Pin Bias Current IADJ 50 100 nA 3
Shutdown Threshold (Off to On) VSHDN 0.3 1.3 V VOUT = Off to On, over operating temperature range 3
Shutdown Threshold (On to Off) VSHDN 1.1 2 V VOUT = On to Off, over operating temperature range 3
SHDN Pin Current ISHDN 0.5 2 µA VSHDN = 0V 3
SHDN Pin Current ISHDN 0.1 0.5 µA VSHDN = 6V 3
Quiescent Current in Shutdown IQ(SHDN) 1 5 µA VIN = 6V, VSHDN = 0V 3
Ripple Rejection 65 75 dB LT3010, VIN = 7V(Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA 3
Current Limit ILIM 60 140 mA LT3010, VIN = 4V, ΔVOUT = -0.1V 3
Input Reverse Leakage Current 6 mA VIN = -80V, VOUT = 0V 3
Reverse Output Current 8 15 µA LT3010, VOUT = 1.275V, VIN < 1.275V 3
IN Pin Voltage VIN -80 80 V 2
OUT Pin Voltage VOUT -60 60 V 2
IN to OUT Differential Voltage -80 80 V 2
ADJ Pin Voltage VADJ -7 7 V 2
SHDN Pin Input Voltage VSHDN -80 80 V 2
Storage Temperature Range TSTG -65 150 °C 2
Operating Junction Temperature Range TJ -55 125 °C LT3010MP 2
Lead Temperature (Soldering, 10 sec) 300 °C 10 sec soldering 2
Thermal Resistance Junction-to-Ambient θJA 40 °C/W TJMAX = 125°C (LT3010E/LT3010MP), 2500 sq mm topside and backside copper 2
Thermal Resistance Junction-to-Case θJC 16 °C/W Measured at bottom (exposed) pad 2
Thermal Resistance Junction-to-Ambient (board range) θJA 40 62 °C/W Still air, 3/32in FR-4, 2500 sq mm to 100 sq mm copper area 10

CAD (KiCad official)

  • Symbol: LT3010MPMS8E#TRPBF
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lt3010mpms8e-trpbf-etched.step / lt3010mpms8e-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3010mpms8e-trpbf.step / lt3010mpms8e-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 c6cfb56a14f03a81, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF