component
LT1965IMS8E-3.3#PBF
Public Made by Adomby adom
Analog Devices Linear Voltage Regulators (LDO), MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200
{
"slug": "lt1965ims8e-3-3-pbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Linear Voltage Regulators (LDO), MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"lt1965ims8e-3.3#pbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt1965ims8e-3-3-pbf.kicad_sym",
"lt1965ims8e-3-3-pbf.kicad_mod",
"lt1965ims8e-3-3-pbf.glb",
"lt1965ims8e-3-3-pbf.step",
"lt1965ims8e-3-3-pbf.lbr",
"docs/hero.png",
"docs/lt1965ims8e-3-3-pbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt1965ims8e-3-3-pbf-hero.glb",
"lt1965ims8e-3-3-pbf-hero.overlay.json",
"lt1965ims8e-3-3-pbf-etched.glb"
],
"component": {
"mpn": "LT1965IMS8E-3.3#PBF",
"manufacturer": "Analog Devices",
"package": "MSOP-8-EP",
"pin_count": 9,
"category": "Power Management ICs",
"subcategory": "Linear Voltage Regulators (LDO)",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/1965fb.pdf",
"parts": {
"symbol": "lt1965ims8e-3-3-pbf.kicad_sym",
"footprint": "lt1965ims8e-3-3-pbf.kicad_mod",
"model_3d": "lt1965ims8e-3-3-pbf-hero.glb",
"model_3d_plain": "lt1965ims8e-3-3-pbf-etched.glb",
"model_3d_step": "lt1965ims8e-3-3-pbf-etched.step",
"model_3d_step_plain": "lt1965ims8e-3-3-pbf.step",
"lbr": "lt1965ims8e-3-3-pbf.lbr"
},
"distributor_links": {
"lcsc": "C665834",
"digikey": "LT1965IMS8E-3.3#PBF-ND",
"mouser": "584-1965IMS8E-3.3PBF"
},
"distributor_check": {
"checked_at": "2026-11-02T16:59:11Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LT1965IMS8E-3.3#PBF-ND",
"status": "found"
},
"mouser": {
"pn": "584-1965IMS8E-3.3PBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "OUT",
"type": "power_out",
"description": "Output pin supplies power to the load and requires a minimum output capacitor of 10µF to prevent oscillations."
},
{
"number": "2",
"name": "OUT",
"type": "power_out",
"description": "Output pin supplies power to the load and requires a minimum output capacitor of 10µF to prevent oscillations."
},
{
"number": "3",
"name": "SENSE",
"type": "input",
"description": "For the fixed-voltage LT1965-3.3 this is the error amplifier input; connect to OUT for optimum regulation, with a SENSE pin bias current of 100µA at the nominal output voltage."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground pin, to be tied to pin 5, pin 9 and the PCB ground."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground pin, to be tied to pin 4, pin 9 and the PCB ground."
},
{
"number": "6",
"name": "SHDN",
"type": "input",
"description": "Pulling SHDN low puts the device into a low power state and turns the output off, with SHDN pin current typically less than 5.5µA and no drive below GND unless tied to IN."
},
{
"number": "7",
"name": "IN",
"type": "power_in",
"description": "Input pin supplies power to the device; a bypass capacitor of 1µF to 10µF suffices, and the pin withstands reverse voltages."
},
{
"number": "8",
"name": "IN",
"type": "power_in",
"description": "Input pin supplies power to the device; a bypass capacitor of 1µF to 10µF suffices, and the pin withstands reverse voltages."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Exposed pad is ground and must be tied directly to pins 4 and 5 and the PCB ground for enhanced thermal performance."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin assignment for MS8E (MSOP-8-EP) taken from the page 2 pinout diagram and cross-checked against t"
],
"pages_sent": 7,
"cost_usd": 0.0201,
"at": "2026-11-02T16:58:57"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/1965fb.pdf",
"pages": 22,
"sha256": "070eb5a9c32d091a",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt1965ims8e-3-3-pbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.96
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt1965ims8e-3-3-pbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.96
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7bbf8029e3026420cdd85dfd46e8a769ddb3501bda469f945db20dff22b408ac",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}