LT1763IS8-5#TRPBF

{
  "slug": "lt1763is8-5-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Linear Voltage Regulators (LDO), SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "lt1763is8-5#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt1763is8-5-trpbf.kicad_sym",
    "lt1763is8-5-trpbf.kicad_mod",
    "lt1763is8-5-trpbf.glb",
    "lt1763is8-5-trpbf.step",
    "lt1763is8-5-trpbf.lbr",
    "docs/hero.png",
    "docs/lt1763is8-5-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt1763is8-5-trpbf-hero.glb",
    "lt1763is8-5-trpbf-hero.overlay.json",
    "lt1763is8-5-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT1763IS8-5#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/1763fh.pdf",
    "parts": {
      "symbol": "lt1763is8-5-trpbf.kicad_sym",
      "footprint": "lt1763is8-5-trpbf.kicad_mod",
      "model_3d": "lt1763is8-5-trpbf-hero.glb",
      "model_3d_plain": "lt1763is8-5-trpbf-etched.glb",
      "model_3d_step": "lt1763is8-5-trpbf-etched.step",
      "model_3d_step_plain": "lt1763is8-5-trpbf.step",
      "lbr": "lt1763is8-5-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C665011",
      "digikey": "LT1763IS8-5#TRPBFTR-ND",
      "mouser": "584-LT1763IS8-5TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T21:14:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT1763IS8-5#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT1763IS8-5TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Output pin supplies power to the load and requires a minimum output capacitor of 3.3µF to prevent oscillations."
      },
      {
        "number": "2",
        "name": "SENSE",
        "type": "input",
        "description": "For the fixed LT1763-5 this is the error amplifier input, optimally connected to OUT, with a 10µA bias current at nominal output voltage and the ability to be pulled below ground."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, connected directly to the bottom of the output voltage-setting divider for optimum load regulation."
      },
      {
        "number": "4",
        "name": "BYP",
        "type": "passive",
        "description": "Bypass pin clamped internally to ±0.6V, where a capacitor up to 0.01µF from the output reduces output noise to a typical 20µVRMS over 10Hz to 100kHz, and it must be left unconnected if not used."
      },
      {
        "number": "5",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown pin turns the output off when pulled low, can be driven by 5V logic or open-collector logic with a pull-up resistor, and must be connected to VIN if unused."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, which should be connected to the other GND pins for proper load regulation."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, which should be connected to the other GND pins for proper load regulation."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin, which should have a 1µF to 10µF bypass capacitor when far from the main input filter, and withstands reverse input voltages without reverse current flow."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The S8 pin numbers were taken from the parenthetical S8 mappings in the Pin Functions section (page ; Pin 2 is named SENSE/ADJ on the package. For the fixed LT1763-5 it is SENSE, the error amplifier inp; Pin descriptions for GND pins 6 and 7 are not given individually in the text; the description is tak"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0693,
        "at": "2026-10-28T21:14:20"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/1763fh.pdf",
        "pages": 22,
        "sha256": "2bc1aa72821928b4",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt1763is8-5-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt1763is8-5-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ee992d6ac70ab9b956efbe82de65bdf4f5256f3783960c9ddbff116345273d60",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "S8",
      "source_page": 20,
      "D": {
        "nom_mm": 4.902,
        "range_mm": [
          4.801,
          5.004
        ]
      },
      "E1": {
        "nom_mm": 3.899,
        "range_mm": [
          3.81,
          3.988
        ]
      },
      "E": {
        "nom_mm": 5.994,
        "range_mm": [
          5.791,
          6.198
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.549,
        "range_mm": [
          1.346,
          1.753
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt1763is8-5-trpbf.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}