LT1763CS8#TRPBF

{
  "slug": "lt1763cs8-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt1763cs8#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt1763cs8-trpbf.kicad_sym",
    "lt1763cs8-trpbf.kicad_mod",
    "lt1763cs8-trpbf.glb",
    "lt1763cs8-trpbf.step",
    "lt1763cs8-trpbf.lbr",
    "docs/hero.png",
    "docs/lt1763cs8-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt1763cs8-trpbf-hero.glb",
    "lt1763cs8-trpbf-hero.overlay.json",
    "lt1763cs8-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT1763CS8#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885116102332416",
    "parts": {
      "symbol": "lt1763cs8-trpbf.kicad_sym",
      "footprint": "lt1763cs8-trpbf.kicad_mod",
      "model_3d": "lt1763cs8-trpbf-hero.glb",
      "model_3d_plain": "lt1763cs8-trpbf-etched.glb",
      "model_3d_step": "lt1763cs8-trpbf-etched.step",
      "model_3d_step_plain": "lt1763cs8-trpbf.step",
      "lbr": "lt1763cs8-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C514413"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T13:16:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Output supplies power to the load and requires a minimum 3.3µF output capacitor to prevent oscillations, with larger capacitors needed for large transient loads."
      },
      {
        "number": "2",
        "name": "SENSE/ADJ",
        "type": "input",
        "description": "For fixed-voltage versions this is the SENSE input to the error amplifier, which should be connected to OUT for optimum regulation; for the LT1763 it is the ADJ input, internally clamped to ±7V, with a 30nA bias current and a 1.22V reference."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; the bottom of the output voltage setting resistor divider should be connected directly to the GND pins for optimum load regulation."
      },
      {
        "number": "4",
        "name": "BYP",
        "type": "passive",
        "description": "Reference bypass pin clamped internally to ±0.6V, where a maximum 0.01µF capacitor from OUT reduces output noise, and it must be left unconnected if not used."
      },
      {
        "number": "5",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown input that turns the output off when pulled low, may be driven by 5V logic or open-collector logic with a pull-up resistor, and must be connected to IN if unused."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected to the other GND pins and the output divider bottom for proper load regulation."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be connected to the other GND pins and the output divider bottom for proper load regulation."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Input supply pin that tolerates reverse voltage with respect to ground and OUT, and should have a 1µF to 10µF bypass capacitor if it is more than six inches from the main input filter capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The page 2 S8 pin-label text extraction is scrambled (names do not align with the printed 1-8 number; Pin 3, 6 and 7 are all GND in the datasheet. Pin 6 and 7 descriptions are shortened to the stated GN"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0782,
        "at": "2026-10-18T13:14:21"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885116102332416",
        "pages": 22,
        "sha256": "2bc1aa72821928b4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt1763cs8-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt1763cs8-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6517bdf005e521af31e092a3f517d37cab10ebdfcb00913046f2b3f7c81c8d40",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}