LT1763CS8-5#TRPBF

{
  "slug": "lt1763cs8-5-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt1763cs8-5#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt1763cs8-5-trpbf.kicad_sym",
    "lt1763cs8-5-trpbf.kicad_mod",
    "lt1763cs8-5-trpbf.glb",
    "lt1763cs8-5-trpbf.step",
    "lt1763cs8-5-trpbf.lbr",
    "docs/hero.png",
    "docs/lt1763cs8-5-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt1763cs8-5-trpbf-hero.glb",
    "lt1763cs8-5-trpbf-hero.overlay.json"
  ],
  "component": {
    "mpn": "LT1763CS8-5#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588905316516319232",
    "parts": {
      "symbol": "lt1763cs8-5-trpbf.kicad_sym",
      "footprint": "lt1763cs8-5-trpbf.kicad_mod",
      "model_3d": "lt1763cs8-5-trpbf-hero.glb",
      "model_3d_plain": "lt1763cs8-5-trpbf.glb",
      "model_3d_step": "lt1763cs8-5-trpbf-etched.step",
      "model_3d_step_plain": "lt1763cs8-5-trpbf.step",
      "lbr": "lt1763cs8-5-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C579850",
      "mouser": "584-LT1763CS8-5TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-09T23:49:30Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 514 calls left today"
      },
      "mouser": {
        "pn": "584-LT1763CS8-5TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulator output that supplies the load and requires a minimum 3.3µF output capacitor to prevent oscillation, with larger capacitors needed for large transient loads."
      },
      {
        "number": "2",
        "name": "SENSE/ADJ",
        "type": "input",
        "description": "On the LT1763-5 fixed-output part this is the SENSE input to the error amplifier, best connected to OUT at the load; it can be pulled below ground in dual-supply systems and still allow start-up and operation."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect the bottom of the output voltage setting divider directly to the GND pins for optimum load regulation."
      },
      {
        "number": "4",
        "name": "BYP",
        "type": "passive",
        "description": "Bypass pin clamped internally to ±0.6V; a capacitor of up to 0.01µF from OUT lowers output noise to a typical 20µVRMS over 10Hz to 100kHz, and the pin must be left unconnected if not used."
      },
      {
        "number": "5",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown pin where the output turns off when pulled low, driven by 5V logic or open-collector logic with a pull-up resistor, and it must be connected to IN if unused."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect the bottom of the output voltage setting divider directly to the GND pins for optimum load regulation."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; connect the bottom of the output voltage setting divider directly to the GND pins for optimum load regulation."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Power input with a wide 1.8V to 20V input range, where a 1µF to 10µF bypass capacitor is recommended if the device is more than six inches from the main input filter capacitor."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN LT1763CS8-5#TRPBF is the 8-lead SO (S8) package, and the pinout is taken from the S8 top vie; Pin 2 is labeled SENSE/ADJ in the datasheet. For the LT1763-5 fixed-output version in this MPN, it f; Pin 2 type is set to input because it is the error-amplifier input. The datasheet does not assign an"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0774,
        "at": "2026-10-09T23:47:22"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588905316516319232",
        "pages": 22,
        "sha256": "2bc1aa72821928b4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt1763cs8-5-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-09",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt1763cs8-5-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "403b268790504c168bfad3a2a7d5b6bfdf7a646860de627af29de8cb5a0850aa",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}