main
Ray Publish 0.1.0 166ace3

LT1762EMS8-3.3#PBF

Analog Devices · Linear Voltage Regulators (LDO) · MSOP-8

LT1762EMS8-3.3#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output pin that supplies power to the load and requires a minimum 2.2µF output capacitor to prevent oscillations.
2 SENSE input Output sense input for the fixed-voltage version, optimally connected to OUT for regulation, with a SENSE pin bias current of 10µA at the nominal output voltage.
3 BYP passive Bypass pin clamped internally to ±0.6V, where a capacitor of at most 0.01µF from the output lowers output noise; it must be left unconnected if not used.
4 GND power_in Ground reference pin for the regulator.
5 SHDN input Shutdown pin where the output turns off when pulled low, driven by 5V logic or open-collector logic with a pull-up resistor, and it must be connected to VIN if unused.
6 NC unconnected No connection; the datasheet assigns no function to this pin.
7 NC unconnected No connection; the datasheet assigns no function to this pin.
8 IN power_in Input supply pin that withstands reverse voltages with respect to ground and OUT, and a bypass capacitor of 1µF to 10µF is sufficient on this pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Regulated Output Voltage VOUT 3.267 3.3 3.333 V LT1762-3.3 VIN = 3.8V, ILOAD = 1mA 3
Regulated Output Voltage (over temperature) VOUT 3.22 3.3 3.38 V LT1762-3.3 4.3V < VIN < 20V, 1mA < ILOAD < 150mA, full operating temperature range 3
Dropout Voltage VDROPOUT 0.09 0.15 V VIN = VOUT(NOMINAL), ILOAD = 1mA 3
Dropout Voltage (over temperature) VDROPOUT 0.19 V VIN = VOUT(NOMINAL), ILOAD = 1mA, full operating temperature range 3
Dropout Voltage VDROPOUT 0.15 0.21 V VIN = VOUT(NOMINAL), ILOAD = 10mA 3
Dropout Voltage (over temperature) VDROPOUT 0.25 V VIN = VOUT(NOMINAL), ILOAD = 10mA, full operating temperature range 3
Dropout Voltage VDROPOUT 0.21 0.27 V VIN = VOUT(NOMINAL), ILOAD = 50mA 3
Dropout Voltage (over temperature) VDROPOUT 0.31 V VIN = VOUT(NOMINAL), ILOAD = 50mA, full operating temperature range 3
Dropout Voltage VDROPOUT 0.27 0.33 V VIN = VOUT(NOMINAL), ILOAD = 150mA 3
Dropout Voltage (over temperature) VDROPOUT 0.4 V VIN = VOUT(NOMINAL), ILOAD = 150mA, full operating temperature range 3
GND Pin Current IGND 25 65 µA VIN = VOUT(NOMINAL), ILOAD = 0mA 3
GND Pin Current (over temperature) IGND 65 µA VIN = VOUT(NOMINAL), ILOAD = 0mA, full operating temperature range 3
GND Pin Current IGND 70 120 µA VIN = VOUT(NOMINAL), ILOAD = 1mA 3
GND Pin Current (over temperature) IGND 120 µA VIN = VOUT(NOMINAL), ILOAD = 1mA, full operating temperature range 3
GND Pin Current IGND 350 500 µA VIN = VOUT(NOMINAL), ILOAD = 10mA 3
GND Pin Current (over temperature) IGND 500 µA VIN = VOUT(NOMINAL), ILOAD = 10mA, full operating temperature range 3
GND Pin Current IGND 1.3 1.8 mA VIN = VOUT(NOMINAL), ILOAD = 50mA 3
GND Pin Current (over temperature) IGND 1.8 mA VIN = VOUT(NOMINAL), ILOAD = 50mA, full operating temperature range 3
GND Pin Current IGND 4 7 mA VIN = VOUT(NOMINAL), ILOAD = 150mA 3
GND Pin Current (over temperature) IGND 7 mA VIN = VOUT(NOMINAL), ILOAD = 150mA, full operating temperature range 3
Line Regulation 1 5 mV LT1762-3.3 ΔVIN = 3.8V to 20V, ILOAD = 1mA 3
Line Regulation (over temperature) 5 mV LT1762-3.3 ΔVIN = 3.8V to 20V, ILOAD = 1mA, full operating temperature range 3
Load Regulation 5 17 mV LT1762-3.3 VIN = 4.3V, ΔILOAD = 1mA to 150mA 3
Load Regulation (over temperature) 33 mV LT1762-3.3 VIN = 4.3V, ΔILOAD = 1mA to 150mA, full operating temperature range 3
Minimum Operating Voltage 1.8 2.3 V ILOAD = 150mA, full operating temperature range 3
Output Voltage Noise 20 µVRMS COUT = 10µF, CBYP = 0.01µF, ILOAD = 150mA, BW = 10Hz to 100kHz 4
Shutdown Threshold (Off to On) 0.8 2 V VOUT = Off to On, full operating temperature range 4
Shutdown Threshold (On to Off) 0.25 0.65 V VOUT = On to Off, full operating temperature range 4
SHDN Pin Current ISHDN 0.1 µA VSHDN = 0V 4
SHDN Pin Current ISHDN 1 µA VSHDN = 20V 4
Quiescent Current in Shutdown IQ 0.1 1 µA VIN = 6V, VSHDN = 0V 4
Ripple Rejection 50 65 dB VIN, VOUT = 1V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 150mA 4
Current Limit ILIM 400 mA VIN = 7V, VOUT = 0V 4
Current Limit (over temperature) ILIM 160 mA VIN = VOUT(NOMINAL) + 1V, ΔVOUT = -0.1V, full operating temperature range 4
Input Reverse Leakage Current 1 mA VIN = -20V, VOUT = 0V, full operating temperature range 4
Reverse Output Current 10 20 µA LT1762-3.3 VOUT = 3.3V, VIN < 3.3V 4
Input Pin Voltage VIN -20 20 V IN pin voltage 2
OUT Pin Voltage VOUT -20 20 V OUT pin voltage 2
Input to Output Differential Voltage -20 20 V Input to output differential voltage 2
SENSE Pin Voltage -20 20 V SENSE pin voltage 2
BYP Pin Voltage -0.6 0.6 V BYP pin voltage 2
SHDN Pin Voltage -20 20 V SHDN pin voltage 2
Operating Junction Temperature Range TJ -40 125 °C Operating junction temperature range (Note 2) 2
Storage Temperature Range TSTG -65 150 °C Storage temperature range 2
Maximum Junction Temperature TJMAX 150 °C TJMAX 2
Junction-to-Ambient Thermal Resistance θJA 125 °C/W MS8 package 2

CAD (KiCad official)

  • Symbol: LT1762EMS8-3.3#PBF
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lt1762ems8-3-3-pbf-etched.step / lt1762ems8-3-3-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1762ems8-3-3-pbf.step / lt1762ems8-3-3-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 74e2ca01c993d790, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF