Generated by kicad-footprint-generator · KiCad file format 20260206
LT1762EMS8-3.3#PBF
Analog Devices · Linear Voltage Regulators (LDO) · MSOP-8
LT1762EMS8-3.3#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Output pin that supplies power to the load and requires a minimum 2.2µF output capacitor to prevent oscillations. |
| 2 | SENSE | input | Output sense input for the fixed-voltage version, optimally connected to OUT for regulation, with a SENSE pin bias current of 10µA at the nominal output voltage. |
| 3 | BYP | passive | Bypass pin clamped internally to ±0.6V, where a capacitor of at most 0.01µF from the output lowers output noise; it must be left unconnected if not used. |
| 4 | GND | power_in | Ground reference pin for the regulator. |
| 5 | SHDN | input | Shutdown pin where the output turns off when pulled low, driven by 5V logic or open-collector logic with a pull-up resistor, and it must be connected to VIN if unused. |
| 6 | NC | unconnected | No connection; the datasheet assigns no function to this pin. |
| 7 | NC | unconnected | No connection; the datasheet assigns no function to this pin. |
| 8 | IN | power_in | Input supply pin that withstands reverse voltages with respect to ground and OUT, and a bypass capacitor of 1µF to 10µF is sufficient on this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Regulated Output Voltage | VOUT | 3.267 | 3.3 | 3.333 | V | LT1762-3.3 VIN = 3.8V, ILOAD = 1mA | 3 |
| Regulated Output Voltage (over temperature) | VOUT | 3.22 | 3.3 | 3.38 | V | LT1762-3.3 4.3V < VIN < 20V, 1mA < ILOAD < 150mA, full operating temperature range | 3 |
| Dropout Voltage | VDROPOUT | 0.09 | 0.15 | V | VIN = VOUT(NOMINAL), ILOAD = 1mA | 3 | |
| Dropout Voltage (over temperature) | VDROPOUT | 0.19 | V | VIN = VOUT(NOMINAL), ILOAD = 1mA, full operating temperature range | 3 | ||
| Dropout Voltage | VDROPOUT | 0.15 | 0.21 | V | VIN = VOUT(NOMINAL), ILOAD = 10mA | 3 | |
| Dropout Voltage (over temperature) | VDROPOUT | 0.25 | V | VIN = VOUT(NOMINAL), ILOAD = 10mA, full operating temperature range | 3 | ||
| Dropout Voltage | VDROPOUT | 0.21 | 0.27 | V | VIN = VOUT(NOMINAL), ILOAD = 50mA | 3 | |
| Dropout Voltage (over temperature) | VDROPOUT | 0.31 | V | VIN = VOUT(NOMINAL), ILOAD = 50mA, full operating temperature range | 3 | ||
| Dropout Voltage | VDROPOUT | 0.27 | 0.33 | V | VIN = VOUT(NOMINAL), ILOAD = 150mA | 3 | |
| Dropout Voltage (over temperature) | VDROPOUT | 0.4 | V | VIN = VOUT(NOMINAL), ILOAD = 150mA, full operating temperature range | 3 | ||
| GND Pin Current | IGND | 25 | 65 | µA | VIN = VOUT(NOMINAL), ILOAD = 0mA | 3 | |
| GND Pin Current (over temperature) | IGND | 65 | µA | VIN = VOUT(NOMINAL), ILOAD = 0mA, full operating temperature range | 3 | ||
| GND Pin Current | IGND | 70 | 120 | µA | VIN = VOUT(NOMINAL), ILOAD = 1mA | 3 | |
| GND Pin Current (over temperature) | IGND | 120 | µA | VIN = VOUT(NOMINAL), ILOAD = 1mA, full operating temperature range | 3 | ||
| GND Pin Current | IGND | 350 | 500 | µA | VIN = VOUT(NOMINAL), ILOAD = 10mA | 3 | |
| GND Pin Current (over temperature) | IGND | 500 | µA | VIN = VOUT(NOMINAL), ILOAD = 10mA, full operating temperature range | 3 | ||
| GND Pin Current | IGND | 1.3 | 1.8 | mA | VIN = VOUT(NOMINAL), ILOAD = 50mA | 3 | |
| GND Pin Current (over temperature) | IGND | 1.8 | mA | VIN = VOUT(NOMINAL), ILOAD = 50mA, full operating temperature range | 3 | ||
| GND Pin Current | IGND | 4 | 7 | mA | VIN = VOUT(NOMINAL), ILOAD = 150mA | 3 | |
| GND Pin Current (over temperature) | IGND | 7 | mA | VIN = VOUT(NOMINAL), ILOAD = 150mA, full operating temperature range | 3 | ||
| Line Regulation | 1 | 5 | mV | LT1762-3.3 ΔVIN = 3.8V to 20V, ILOAD = 1mA | 3 | ||
| Line Regulation (over temperature) | 5 | mV | LT1762-3.3 ΔVIN = 3.8V to 20V, ILOAD = 1mA, full operating temperature range | 3 | |||
| Load Regulation | 5 | 17 | mV | LT1762-3.3 VIN = 4.3V, ΔILOAD = 1mA to 150mA | 3 | ||
| Load Regulation (over temperature) | 33 | mV | LT1762-3.3 VIN = 4.3V, ΔILOAD = 1mA to 150mA, full operating temperature range | 3 | |||
| Minimum Operating Voltage | 1.8 | 2.3 | V | ILOAD = 150mA, full operating temperature range | 3 | ||
| Output Voltage Noise | 20 | µVRMS | COUT = 10µF, CBYP = 0.01µF, ILOAD = 150mA, BW = 10Hz to 100kHz | 4 | |||
| Shutdown Threshold (Off to On) | 0.8 | 2 | V | VOUT = Off to On, full operating temperature range | 4 | ||
| Shutdown Threshold (On to Off) | 0.25 | 0.65 | V | VOUT = On to Off, full operating temperature range | 4 | ||
| SHDN Pin Current | ISHDN | 0.1 | µA | VSHDN = 0V | 4 | ||
| SHDN Pin Current | ISHDN | 1 | µA | VSHDN = 20V | 4 | ||
| Quiescent Current in Shutdown | IQ | 0.1 | 1 | µA | VIN = 6V, VSHDN = 0V | 4 | |
| Ripple Rejection | 50 | 65 | dB | VIN, VOUT = 1V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 150mA | 4 | ||
| Current Limit | ILIM | 400 | mA | VIN = 7V, VOUT = 0V | 4 | ||
| Current Limit (over temperature) | ILIM | 160 | mA | VIN = VOUT(NOMINAL) + 1V, ΔVOUT = -0.1V, full operating temperature range | 4 | ||
| Input Reverse Leakage Current | 1 | mA | VIN = -20V, VOUT = 0V, full operating temperature range | 4 | |||
| Reverse Output Current | 10 | 20 | µA | LT1762-3.3 VOUT = 3.3V, VIN < 3.3V | 4 | ||
| Input Pin Voltage | VIN | -20 | 20 | V | IN pin voltage | 2 | |
| OUT Pin Voltage | VOUT | -20 | 20 | V | OUT pin voltage | 2 | |
| Input to Output Differential Voltage | -20 | 20 | V | Input to output differential voltage | 2 | ||
| SENSE Pin Voltage | -20 | 20 | V | SENSE pin voltage | 2 | ||
| BYP Pin Voltage | -0.6 | 0.6 | V | BYP pin voltage | 2 | ||
| SHDN Pin Voltage | -20 | 20 | V | SHDN pin voltage | 2 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Operating junction temperature range (Note 2) | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | Storage temperature range | 2 | |
| Maximum Junction Temperature | TJMAX | 150 | °C | TJMAX | 2 | ||
| Junction-to-Ambient Thermal Resistance | θJA | 125 | °C/W | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LT1762EMS8-3.3#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt1762ems8-3-3-pbf-etched.step/lt1762ems8-3-3-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1762ems8-3-3-pbf.step/lt1762ems8-3-3-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
74e2ca01c993d790, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).