main
Ray
Publish 0.1.0
527c5f7
LT1761ES5-BYP#TRMPBF
Analog Devices · Linear Voltage Regulators (LDO) · TSOT-23-5
LT1761ES5-BYP#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin, rated ±20V absolute maximum, that withstands reverse voltage and needs a 1μF to 10μF bypass capacitor if the device is more than six inches from the main input filter capacitor. |
| 2 | GND | power_in | Ground. |
| 3 | BYP | passive | Bypass pin, clamped internally to ±0.6V (one VBE) from ground, where a capacitor of up to 0.01μF from OUT lowers output noise to a typical 20μVRMS (10Hz to 100kHz), and which must be left unconnected if unused. |
| 4 | ADJ | input | Adjust pin that is the error amplifier input, internally clamped to ±7V, with 30nA bias current into the pin and a 1.22V reference to ground, giving an output range of 1.22V to 20V. |
| 5 | OUT | power_out | Regulated output that supplies up to 100mA to the load and requires a minimum output capacitor of 1μF to prevent oscillations. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage (VIN) operating range | 1.8 | 20 | V | Wide input voltage range (feature list) | 1 | ||
| Output Current | 100 | mA | Output current capability (feature list) | 1 | |||
| IN Pin Voltage | -20 | 20 | V | 2 | |||
| OUT Pin Voltage | -20 | 20 | V | 2 | |||
| Input to Output Differential Voltage | -20 | 20 | V | 2 | |||
| BYP Pin Voltage | -0.6 | 0.6 | V | 2 | |||
| SHDN Pin Voltage | -20 | 20 | V | 2 | |||
| Operating Junction Temperature Range (E, I Grade) | TJ | -40 | 125 | °C | E, I grade (Note 2) | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10 sec | 2 | |||
| Minimum Input Voltage | 1.8 | 2.3 | V | ILOAD = 100mA, full operating temperature range (l) | 4 | ||
| Dropout Voltage | 0.1 | 0.15 | V | VIN = VOUT(NOMINAL), ILOAD = 1mA | 5 | ||
| Dropout Voltage | 0.19 | V | VIN = VOUT(NOMINAL), ILOAD = 1mA, full operating temperature range (l) | 5 | |||
| Dropout Voltage | 0.17 | 0.22 | V | VIN = VOUT(NOMINAL), ILOAD = 10mA | 5 | ||
| Dropout Voltage | 0.29 | V | VIN = VOUT(NOMINAL), ILOAD = 10mA, full operating temperature range (l) | 5 | |||
| Dropout Voltage | 0.24 | 0.28 | V | VIN = VOUT(NOMINAL), ILOAD = 50mA | 5 | ||
| Dropout Voltage | 0.38 | V | VIN = VOUT(NOMINAL), ILOAD = 50mA, full operating temperature range (l) | 5 | |||
| Dropout Voltage | 0.3 | 0.35 | V | VIN = VOUT(NOMINAL), ILOAD = 100mA | 5 | ||
| Dropout Voltage | 0.45 | V | VIN = VOUT(NOMINAL), ILOAD = 100mA, full operating temperature range (l) | 5 | |||
| GND Pin Current (quiescent) | 20 | 45 | μA | VIN = VOUT(NOMINAL), ILOAD = 0mA | 6 | ||
| GND Pin Current | 55 | 100 | μA | VIN = VOUT(NOMINAL), ILOAD = 1mA | 6 | ||
| GND Pin Current | 230 | 400 | μA | VIN = VOUT(NOMINAL), ILOAD = 10mA | 6 | ||
| GND Pin Current | 1 | 2 | mA | VIN = VOUT(NOMINAL), ILOAD = 50mA | 6 | ||
| GND Pin Current | 2.2 | 4 | mA | VIN = VOUT(NOMINAL), ILOAD = 100mA | 6 | ||
| Shutdown Threshold (Off to On) | 0.25 | 0.8 | V | VOUT = Off to On | 6 | ||
| Shutdown Threshold (On to Off) | 0.65 | 2 | V | VOUT = On to Off | 6 | ||
| SHDN Pin Current | 0 | 0.5 | μA | VSHDN = 0V | 6 | ||
| SHDN Pin Current | 1 | 3 | μA | VSHDN = 20V | 6 | ||
| Ripple Rejection | 55 | 65 | dB | VIN, VOUT = 1.5V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA | 6 | ||
| Current Limit | 110 | mA | VIN = VOUT(NOMINAL) + 1V or 2.3V (Note 12), ΔVOUT = -5%, full operating temperature range (l) | 6 | |||
| Current Limit | 200 | mA | VIN = 7V, VOUT = 0V | 6 | |||
| Input Reverse Leakage Current | 1 | mA | VIN = -20V, VOUT = 0V, full operating temperature range (l) | 6 | |||
| Quiescent Current in Shutdown | 0.01 | 0.1 | μA | VIN = 6V, VSHDN = 0V | 6 | ||
| Output Voltage Noise | 20 | μVRMS | COUT = 10μF, CBYP = 0.01μF, ILOAD = 100mA, BW = 10Hz to 100kHz | 6 | |||
| Junction-to-Ambient Thermal Resistance (θJA) | θJA | 250 | °C/W | Package header value, S5 5-lead TSOT-23 | 2 | ||
| Maximum Junction Temperature (TJMAX) | TJMAX | 150 | °C | Package header value (conflicts with 125°C operating junction limit) | 2 | ||
| Junction-to-Ambient Thermal Resistance (measured) | 125 | °C/W | Topside copper 2500mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 | |||
| Junction-to-Ambient Thermal Resistance (measured) | 130 | °C/W | Topside copper 225mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 | |||
| Junction-to-Ambient Thermal Resistance (measured) | 135 | °C/W | Topside copper 100mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 | |||
| Junction-to-Ambient Thermal Resistance (measured) | 150 | °C/W | Topside copper 50mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 |
CAD (KiCad official)
- Symbol:
LT1761ES5-BYP#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt1761es5-byp-trmpbf-etched.step/lt1761es5-byp-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1761es5-byp-trmpbf.step/lt1761es5-byp-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
5e4fc36c022415d2, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1761ES5-BYP#TRMPBF
**Analog Devices** · Linear Voltage Regulators (LDO) · TSOT-23-5
LT1761ES5-BYP#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin, rated ±20V absolute maximum, that withstands reverse voltage and needs a 1μF to 10μF bypass capacitor if the device is more than six inches from the main input filter capacitor. |
| 2 | GND | power_in | Ground. |
| 3 | BYP | passive | Bypass pin, clamped internally to ±0.6V (one VBE) from ground, where a capacitor of up to 0.01μF from OUT lowers output noise to a typical 20μVRMS (10Hz to 100kHz), and which must be left unconnected if unused. |
| 4 | ADJ | input | Adjust pin that is the error amplifier input, internally clamped to ±7V, with 30nA bias current into the pin and a 1.22V reference to ground, giving an output range of 1.22V to 20V. |
| 5 | OUT | power_out | Regulated output that supplies up to 100mA to the load and requires a minimum output capacitor of 1μF to prevent oscillations. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage (VIN) operating range | | 1.8 | | 20 | V | Wide input voltage range (feature list) | 1 |
| Output Current | | | | 100 | mA | Output current capability (feature list) | 1 |
| IN Pin Voltage | | -20 | | 20 | V | | 2 |
| OUT Pin Voltage | | -20 | | 20 | V | | 2 |
| Input to Output Differential Voltage | | -20 | | 20 | V | | 2 |
| BYP Pin Voltage | | -0.6 | | 0.6 | V | | 2 |
| SHDN Pin Voltage | | -20 | | 20 | V | | 2 |
| Operating Junction Temperature Range (E, I Grade) | TJ | -40 | | 125 | °C | E, I grade (Note 2) | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering) | | | | 300 | °C | Soldering, 10 sec | 2 |
| Minimum Input Voltage | | | 1.8 | 2.3 | V | ILOAD = 100mA, full operating temperature range (l) | 4 |
| Dropout Voltage | | | 0.1 | 0.15 | V | VIN = VOUT(NOMINAL), ILOAD = 1mA | 5 |
| Dropout Voltage | | | | 0.19 | V | VIN = VOUT(NOMINAL), ILOAD = 1mA, full operating temperature range (l) | 5 |
| Dropout Voltage | | | 0.17 | 0.22 | V | VIN = VOUT(NOMINAL), ILOAD = 10mA | 5 |
| Dropout Voltage | | | | 0.29 | V | VIN = VOUT(NOMINAL), ILOAD = 10mA, full operating temperature range (l) | 5 |
| Dropout Voltage | | | 0.24 | 0.28 | V | VIN = VOUT(NOMINAL), ILOAD = 50mA | 5 |
| Dropout Voltage | | | | 0.38 | V | VIN = VOUT(NOMINAL), ILOAD = 50mA, full operating temperature range (l) | 5 |
| Dropout Voltage | | | 0.3 | 0.35 | V | VIN = VOUT(NOMINAL), ILOAD = 100mA | 5 |
| Dropout Voltage | | | | 0.45 | V | VIN = VOUT(NOMINAL), ILOAD = 100mA, full operating temperature range (l) | 5 |
| GND Pin Current (quiescent) | | | 20 | 45 | μA | VIN = VOUT(NOMINAL), ILOAD = 0mA | 6 |
| GND Pin Current | | | 55 | 100 | μA | VIN = VOUT(NOMINAL), ILOAD = 1mA | 6 |
| GND Pin Current | | | 230 | 400 | μA | VIN = VOUT(NOMINAL), ILOAD = 10mA | 6 |
| GND Pin Current | | | 1 | 2 | mA | VIN = VOUT(NOMINAL), ILOAD = 50mA | 6 |
| GND Pin Current | | | 2.2 | 4 | mA | VIN = VOUT(NOMINAL), ILOAD = 100mA | 6 |
| Shutdown Threshold (Off to On) | | 0.25 | | 0.8 | V | VOUT = Off to On | 6 |
| Shutdown Threshold (On to Off) | | 0.65 | | 2 | V | VOUT = On to Off | 6 |
| SHDN Pin Current | | 0 | | 0.5 | μA | VSHDN = 0V | 6 |
| SHDN Pin Current | | 1 | | 3 | μA | VSHDN = 20V | 6 |
| Ripple Rejection | | 55 | 65 | | dB | VIN, VOUT = 1.5V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA | 6 |
| Current Limit | | 110 | | | mA | VIN = VOUT(NOMINAL) + 1V or 2.3V (Note 12), ΔVOUT = -5%, full operating temperature range (l) | 6 |
| Current Limit | | | 200 | | mA | VIN = 7V, VOUT = 0V | 6 |
| Input Reverse Leakage Current | | | | 1 | mA | VIN = -20V, VOUT = 0V, full operating temperature range (l) | 6 |
| Quiescent Current in Shutdown | | | 0.01 | 0.1 | μA | VIN = 6V, VSHDN = 0V | 6 |
| Output Voltage Noise | | | 20 | | μVRMS | COUT = 10μF, CBYP = 0.01μF, ILOAD = 100mA, BW = 10Hz to 100kHz | 6 |
| Junction-to-Ambient Thermal Resistance (θJA) | θJA | | 250 | | °C/W | Package header value, S5 5-lead TSOT-23 | 2 |
| Maximum Junction Temperature (TJMAX) | TJMAX | | | 150 | °C | Package header value (conflicts with 125°C operating junction limit) | 2 |
| Junction-to-Ambient Thermal Resistance (measured) | | | 125 | | °C/W | Topside copper 2500mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 |
| Junction-to-Ambient Thermal Resistance (measured) | | | 130 | | °C/W | Topside copper 225mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 |
| Junction-to-Ambient Thermal Resistance (measured) | | | 135 | | °C/W | Topside copper 100mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 |
| Junction-to-Ambient Thermal Resistance (measured) | | | 150 | | °C/W | Topside copper 50mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 | 17 |
## CAD (KiCad official)
- Symbol: `LT1761ES5-BYP#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lt1761es5-byp-trmpbf-etched.step` / `lt1761es5-byp-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1761es5-byp-trmpbf.step` / `lt1761es5-byp-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/1761sff.pdf) (22 pp, sha256 `5e4fc36c022415d2`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1761es5-byp-trmpbf-datasheet.pdf)