Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1761ES5-BYP#TRMPBF

Analog Devices · Linear Voltage Regulators (LDO) · TSOT-23-5

LT1761ES5-BYP#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input supply pin, rated ±20V absolute maximum, that withstands reverse voltage and needs a 1μF to 10μF bypass capacitor if the device is more than six inches from the main input filter capacitor.
2 GND power_in Ground.
3 BYP passive Bypass pin, clamped internally to ±0.6V (one VBE) from ground, where a capacitor of up to 0.01μF from OUT lowers output noise to a typical 20μVRMS (10Hz to 100kHz), and which must be left unconnected if unused.
4 ADJ input Adjust pin that is the error amplifier input, internally clamped to ±7V, with 30nA bias current into the pin and a 1.22V reference to ground, giving an output range of 1.22V to 20V.
5 OUT power_out Regulated output that supplies up to 100mA to the load and requires a minimum output capacitor of 1μF to prevent oscillations.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage (VIN) operating range 1.8 20 V Wide input voltage range (feature list) 1
Output Current 100 mA Output current capability (feature list) 1
IN Pin Voltage -20 20 V 2
OUT Pin Voltage -20 20 V 2
Input to Output Differential Voltage -20 20 V 2
BYP Pin Voltage -0.6 0.6 V 2
SHDN Pin Voltage -20 20 V 2
Operating Junction Temperature Range (E, I Grade) TJ -40 125 °C E, I grade (Note 2) 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C Soldering, 10 sec 2
Minimum Input Voltage 1.8 2.3 V ILOAD = 100mA, full operating temperature range (l) 4
Dropout Voltage 0.1 0.15 V VIN = VOUT(NOMINAL), ILOAD = 1mA 5
Dropout Voltage 0.19 V VIN = VOUT(NOMINAL), ILOAD = 1mA, full operating temperature range (l) 5
Dropout Voltage 0.17 0.22 V VIN = VOUT(NOMINAL), ILOAD = 10mA 5
Dropout Voltage 0.29 V VIN = VOUT(NOMINAL), ILOAD = 10mA, full operating temperature range (l) 5
Dropout Voltage 0.24 0.28 V VIN = VOUT(NOMINAL), ILOAD = 50mA 5
Dropout Voltage 0.38 V VIN = VOUT(NOMINAL), ILOAD = 50mA, full operating temperature range (l) 5
Dropout Voltage 0.3 0.35 V VIN = VOUT(NOMINAL), ILOAD = 100mA 5
Dropout Voltage 0.45 V VIN = VOUT(NOMINAL), ILOAD = 100mA, full operating temperature range (l) 5
GND Pin Current (quiescent) 20 45 μA VIN = VOUT(NOMINAL), ILOAD = 0mA 6
GND Pin Current 55 100 μA VIN = VOUT(NOMINAL), ILOAD = 1mA 6
GND Pin Current 230 400 μA VIN = VOUT(NOMINAL), ILOAD = 10mA 6
GND Pin Current 1 2 mA VIN = VOUT(NOMINAL), ILOAD = 50mA 6
GND Pin Current 2.2 4 mA VIN = VOUT(NOMINAL), ILOAD = 100mA 6
Shutdown Threshold (Off to On) 0.25 0.8 V VOUT = Off to On 6
Shutdown Threshold (On to Off) 0.65 2 V VOUT = On to Off 6
SHDN Pin Current 0 0.5 μA VSHDN = 0V 6
SHDN Pin Current 1 3 μA VSHDN = 20V 6
Ripple Rejection 55 65 dB VIN, VOUT = 1.5V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 50mA 6
Current Limit 110 mA VIN = VOUT(NOMINAL) + 1V or 2.3V (Note 12), ΔVOUT = -5%, full operating temperature range (l) 6
Current Limit 200 mA VIN = 7V, VOUT = 0V 6
Input Reverse Leakage Current 1 mA VIN = -20V, VOUT = 0V, full operating temperature range (l) 6
Quiescent Current in Shutdown 0.01 0.1 μA VIN = 6V, VSHDN = 0V 6
Output Voltage Noise 20 μVRMS COUT = 10μF, CBYP = 0.01μF, ILOAD = 100mA, BW = 10Hz to 100kHz 6
Junction-to-Ambient Thermal Resistance (θJA) θJA 250 °C/W Package header value, S5 5-lead TSOT-23 2
Maximum Junction Temperature (TJMAX) TJMAX 150 °C Package header value (conflicts with 125°C operating junction limit) 2
Junction-to-Ambient Thermal Resistance (measured) 125 °C/W Topside copper 2500mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 17
Junction-to-Ambient Thermal Resistance (measured) 130 °C/W Topside copper 225mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 17
Junction-to-Ambient Thermal Resistance (measured) 135 °C/W Topside copper 100mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 17
Junction-to-Ambient Thermal Resistance (measured) 150 °C/W Topside copper 50mm2, backside copper 2500mm2, board area 2500mm2, still air, 3/32in FR-4 17

CAD (KiCad official)

  • Symbol: LT1761ES5-BYP#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lt1761es5-byp-trmpbf-etched.step / lt1761es5-byp-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1761es5-byp-trmpbf.step / lt1761es5-byp-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 5e4fc36c022415d2, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF