main
Ray
Publish 0.1.0
edc2dcd
LT1461ACS8-2.5#PBF
Analog Devices · Voltage References · SO-8
LT1461ACS8-2.5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 2 | VIN | power_in | Supply input; the datasheet's basic connection requires (VOUT + 0.3V) ≤ VIN ≤ 20V, and the absolute maximum input voltage is 20V. |
| 3 | SHDN | input | Active-low shutdown: pulling below 0.8V max shuts off load current, while open or ≥2.4V min keeps the reference operating normally. |
| 4 | GND | power_in | Ground reference pin for the reference; output short-circuit current to GND is limited to 100mA. |
| 5 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 6 | VOUT | power_out | Precision reference output rated for 50mA minimum sourcing; an output capacitor is required for stability (1µF for loads ≤1mA, 2µF or greater for loads up to 75mA). |
| 7 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 8 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | -0.04 | 0.04 | % | LT1461ACS8 (A grade, 0°C to 70°C) | 3 | ||
| Output Voltage Temperature Coefficient | 1 | 3 | ppm/°C | Over 0°C to 70°C (l); TC = (VOMAX, VOMIN)/(TMAX, TMIN) | 3 | ||
| Line Regulation | 2 | 8 | ppm/V | (VOUT + 0.5V) ≤ VIN ≤ 20V | 4 | ||
| Load Regulation Sourcing | 12 | 30 | ppm/mA | VIN = VOUT + 2.5V; 0 ≤ IOUT ≤ 50mA | 4 | ||
| Dropout Voltage | VIN, VOUT | 0.06 | 0.3 | V | VOUT Error = 0.1%; IOUT = 0mA | 4 | |
| Dropout Voltage | VIN, VOUT | 0.13 | 0.4 | V | VOUT Error = 0.1%; IOUT = 1mA | 4 | |
| Dropout Voltage | VIN, VOUT | 0.2 | V | VOUT Error = 0.1%; IOUT = 10mA | 4 | ||
| Shutdown Pin Logic High Input Voltage | 2.4 | V | 4 | ||||
| Logic High Input Current | 2 | 15 | µA | Pin 3 = 2.4V | 4 | ||
| Logic Low Input Voltage | 0.5 | 0.8 | V | 4 | |||
| Logic Low Input Current | 4 | µA | Pin 3 = 0.8V | 4 | |||
| Supply Current | IS | 35 | 50 | µA | No Load | 4 | |
| Shutdown Current | IS(SHDN) | 25 | 35 | µA | RL = 1k | 4 | |
| Output Current Short | 100 | mA | VOUT to GND | 4 | |||
| Output Voltage Noise | 8 | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 | |||
| Output Voltage Noise | 9.6 | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 | |||
| Long-Term Drift of Output Voltage, SO-8 Package | 60 | ppm/√kHr | See Applications Information | 4 | |||
| Thermal Hysteresis | 40 | ppm | ΔT = 0°C to 70°C | 4 | |||
| Input Voltage | VIN | 20 | V | 2 | |||
| Operating Temperature Range | -40 | 125 | °C | Note 2: guaranteed functional | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | Note 3 | 2 | ||
| Specified Temperature Range (Commercial) | 0 | 70 | °C | Commercial grade (LT1461ACS8) | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance, Junction to Ambient | θJA | 190 | °C/W | 8-lead plastic SO (S8) package, Note 3 | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | to PC board stress because of the small amount of plastic | 11 |
CAD (KiCad official)
- Symbol:
LT1461ACS8-2.5#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1461acs8-2-5-pbf-etched.step/lt1461acs8-2-5-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1461acs8-2-5-pbf.step/lt1461acs8-2-5-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
dcc2277edeb5e99d, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1461ACS8-2.5#PBF
**Analog Devices** · Voltage References · SO-8
LT1461ACS8-2.5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 2 | VIN | power_in | Supply input; the datasheet's basic connection requires (VOUT + 0.3V) ≤ VIN ≤ 20V, and the absolute maximum input voltage is 20V. |
| 3 | SHDN | input | Active-low shutdown: pulling below 0.8V max shuts off load current, while open or ≥2.4V min keeps the reference operating normally. |
| 4 | GND | power_in | Ground reference pin for the reference; output short-circuit current to GND is limited to 100mA. |
| 5 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 6 | VOUT | power_out | Precision reference output rated for 50mA minimum sourcing; an output capacitor is required for stability (1µF for loads ≤1mA, 2µF or greater for loads up to 75mA). |
| 7 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
| 8 | DNC | unconnected | Do not connect; this pin must be left unconnected. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | | -0.04 | | 0.04 | % | LT1461ACS8 (A grade, 0°C to 70°C) | 3 |
| Output Voltage Temperature Coefficient | | | 1 | 3 | ppm/°C | Over 0°C to 70°C (l); TC = (VOMAX, VOMIN)/(TMAX, TMIN) | 3 |
| Line Regulation | | | 2 | 8 | ppm/V | (VOUT + 0.5V) ≤ VIN ≤ 20V | 4 |
| Load Regulation Sourcing | | | 12 | 30 | ppm/mA | VIN = VOUT + 2.5V; 0 ≤ IOUT ≤ 50mA | 4 |
| Dropout Voltage | VIN, VOUT | | 0.06 | 0.3 | V | VOUT Error = 0.1%; IOUT = 0mA | 4 |
| Dropout Voltage | VIN, VOUT | | 0.13 | 0.4 | V | VOUT Error = 0.1%; IOUT = 1mA | 4 |
| Dropout Voltage | VIN, VOUT | | 0.2 | | V | VOUT Error = 0.1%; IOUT = 10mA | 4 |
| Shutdown Pin Logic High Input Voltage | | 2.4 | | | V | | 4 |
| Logic High Input Current | | | 2 | 15 | µA | Pin 3 = 2.4V | 4 |
| Logic Low Input Voltage | | | 0.5 | 0.8 | V | | 4 |
| Logic Low Input Current | | | | 4 | µA | Pin 3 = 0.8V | 4 |
| Supply Current | IS | | 35 | 50 | µA | No Load | 4 |
| Shutdown Current | IS(SHDN) | | 25 | 35 | µA | RL = 1k | 4 |
| Output Current Short | | | 100 | | mA | VOUT to GND | 4 |
| Output Voltage Noise | | | 8 | | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 |
| Output Voltage Noise | | | 9.6 | | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 |
| Long-Term Drift of Output Voltage, SO-8 Package | | | 60 | | ppm/√kHr | See Applications Information | 4 |
| Thermal Hysteresis | | | 40 | | ppm | ΔT = 0°C to 70°C | 4 |
| Input Voltage | VIN | | | 20 | V | | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | Note 2: guaranteed functional | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | Note 3 | 2 |
| Specified Temperature Range (Commercial) | | 0 | | 70 | °C | Commercial grade (LT1461ACS8) | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Thermal Resistance, Junction to Ambient | θJA | | 190 | | °C/W | 8-lead plastic SO (S8) package, Note 3 | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | to PC board stress because of the small amount of plastic | 11 |
## CAD (KiCad official)
- Symbol: `LT1461ACS8-2.5#PBF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lt1461acs8-2-5-pbf-etched.step` / `lt1461acs8-2-5-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1461acs8-2-5-pbf.step` / `lt1461acs8-2-5-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LT1461.pdf) (18 pp, sha256 `dcc2277edeb5e99d`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1461acs8-2-5-pbf-datasheet.pdf)