main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt1461acs8-2-5-pbf: viewers · Ray
lt1461acs8-2-5-pbf-etched.glb Publish 0.1.0 · Ray
lt1461acs8-2-5-pbf-etched.step lt1461acs8-2-5-pbf: factory component page (tier=mfr) · Ray
lt1461acs8-2-5-pbf-hero.glb lt1461acs8-2-5-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt1461acs8-2-5-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt1461acs8-2-5-pbf.glb Publish 0.1.0 · Ray
lt1461acs8-2-5-pbf.kicad_mod Publish 0.1.0 · Ray
lt1461acs8-2-5-pbf.kicad_sym Publish 0.1.0 · Ray
lt1461acs8-2-5-pbf.lbr Publish 0.1.0 · Ray
lt1461acs8-2-5-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT1461ACS8-2.5#PBF

Analog Devices · Voltage References · SO-8

LT1461ACS8-2.5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do not connect; this pin must be left unconnected.
2 VIN power_in Supply input; the datasheet's basic connection requires (VOUT + 0.3V) ≤ VIN ≤ 20V, and the absolute maximum input voltage is 20V.
3 SHDN input Active-low shutdown: pulling below 0.8V max shuts off load current, while open or ≥2.4V min keeps the reference operating normally.
4 GND power_in Ground reference pin for the reference; output short-circuit current to GND is limited to 100mA.
5 DNC unconnected Do not connect; this pin must be left unconnected.
6 VOUT power_out Precision reference output rated for 50mA minimum sourcing; an output capacitor is required for stability (1µF for loads ≤1mA, 2µF or greater for loads up to 75mA).
7 DNC unconnected Do not connect; this pin must be left unconnected.
8 DNC unconnected Do not connect; this pin must be left unconnected.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage -0.04 0.04 % LT1461ACS8 (A grade, 0°C to 70°C) 3
Output Voltage Temperature Coefficient 1 3 ppm/°C Over 0°C to 70°C (l); TC = (VOMAX, VOMIN)/(TMAX, TMIN) 3
Line Regulation 2 8 ppm/V (VOUT + 0.5V) ≤ VIN ≤ 20V 4
Load Regulation Sourcing 12 30 ppm/mA VIN = VOUT + 2.5V; 0 ≤ IOUT ≤ 50mA 4
Dropout Voltage VIN, VOUT 0.06 0.3 V VOUT Error = 0.1%; IOUT = 0mA 4
Dropout Voltage VIN, VOUT 0.13 0.4 V VOUT Error = 0.1%; IOUT = 1mA 4
Dropout Voltage VIN, VOUT 0.2 V VOUT Error = 0.1%; IOUT = 10mA 4
Shutdown Pin Logic High Input Voltage 2.4 V 4
Logic High Input Current 2 15 µA Pin 3 = 2.4V 4
Logic Low Input Voltage 0.5 0.8 V 4
Logic Low Input Current 4 µA Pin 3 = 0.8V 4
Supply Current IS 35 50 µA No Load 4
Shutdown Current IS(SHDN) 25 35 µA RL = 1k 4
Output Current Short 100 mA VOUT to GND 4
Output Voltage Noise 8 ppmP-P 0.1Hz ≤ f ≤ 10Hz 4
Output Voltage Noise 9.6 ppmRMS 10Hz ≤ f ≤ 1kHz 4
Long-Term Drift of Output Voltage, SO-8 Package 60 ppm/√kHr See Applications Information 4
Thermal Hysteresis 40 ppm ΔT = 0°C to 70°C 4
Input Voltage VIN 20 V 2
Operating Temperature Range -40 125 °C Note 2: guaranteed functional 2
Storage Temperature Range -65 150 °C Note 3 2
Specified Temperature Range (Commercial) 0 70 °C Commercial grade (LT1461ACS8) 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance, Junction to Ambient θJA 190 °C/W 8-lead plastic SO (S8) package, Note 3 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC to PC board stress because of the small amount of plastic 11

CAD (KiCad official)

  • Symbol: LT1461ACS8-2.5#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1461acs8-2-5-pbf-etched.step / lt1461acs8-2-5-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1461acs8-2-5-pbf.step / lt1461acs8-2-5-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 dcc2277edeb5e99d, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF