component
LT1213CS8#PBF
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| lt1213cs8-pbf-etched.glb | 7d ago |
| lt1213cs8-pbf-etched.step | 7d ago |
| lt1213cs8-pbf-hero.glb | 7d ago |
| lt1213cs8-pbf-hero.overlay.json | 7d ago |
| lt1213cs8-pbf.glb | 7d ago |
| lt1213cs8-pbf.kicad_mod | 7d ago |
| lt1213cs8-pbf.kicad_sym | 7d ago |
| lt1213cs8-pbf.lbr | 7d ago |
| lt1213cs8-pbf.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
| verification.json | 7d ago |
LT1213CS8#PBF
Analog Devices · Pre-ordered Chips · SO-8
LT1213CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A; it swings to within 4mV of the negative supply with no load and the minimum output drive is 30mA. |
| 2 | -IN A | input | Inverting input of amplifier A; input currents are less than 200nA and the inputs can be driven beyond the supplies without damage or phase reversal. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the input voltage range includes ground (V-) and inputs can be driven beyond the supplies without damage or phase reversal. |
| 4 | V- | power_in | Negative supply pin; the total supply (V+ to V-) must be greater than 2.5V and less than 36V. |
| 5 | +IN B | input | Non-inverting input of amplifier B; the input voltage range includes ground (V-) and inputs can be driven beyond the supplies without damage or phase reversal. |
| 6 | -IN B | input | Inverting input of amplifier B; input currents are less than 200nA and the inputs can be driven beyond the supplies without damage or phase reversal. |
| 7 | OUT B | output | Output of amplifier B; it swings to within 4mV of the negative supply with no load and the minimum output drive is 30mA. |
| 8 | V+ | power_in | Positive supply pin; the total supply (V+ to V-) must be greater than 2.5V and less than 36V, and should be bypassed with about 0.01µF within an inch of the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 100 | 275 | µV | VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C | 3 | |
| Input Offset Current | IOS | 5 | 40 | nA | VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C | 3 | |
| Input Bias Current | IB | 100 | 200 | nA | VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C | 3 | |
| Input Offset Voltage | VOS | 150 | 375 | µV | VS = 5V, VCM = 0.5V, VOUT = 0.5V, 0°C ≤ TA ≤ 70°C | 4 | |
| Input Offset Voltage | VOS | 175 | 500 | µV | VS = 5V, VCM = 0.5V, VOUT = 0.5V, -40°C ≤ TA ≤ 85°C | 4 | |
| Input Bias Current | IB | 110 | 230 | nA | VS = 5V, VCM = 0.5V, VOUT = 0.5V, 0°C ≤ TA ≤ 70°C | 4 | |
| Input Bias Current | IB | 120 | 250 | nA | VS = 5V, VCM = 0.5V, VOUT = 0.5V, -40°C ≤ TA ≤ 85°C | 4 | |
| Common Mode Rejection Ratio | CMRR | 86 | 105 | dB | VCM = 0V to 3.5V | 3 | |
| Power Supply Rejection Ratio | PSRR | 90 | 116 | dB | VS = 2.5V to 12.5V | 3 | |
| Large-Signal Voltage Gain | AVOL | 250 | 850 | V/mV | VO = 0.05V to 3.7V, RL = 500Ω | 3 | |
| Maximum Output Voltage Swing Output High | 4.3 | 4.39 | V | Output High, No Load | 3 | ||
| Maximum Output Voltage Swing Output High | 4.2 | 4.3 | V | Output High, ISOURCE = 1mA | 3 | ||
| Maximum Output Voltage Swing Output High | 3.8 | 3.92 | V | Output High, ISOURCE = 20mA | 3 | ||
| Maximum Output Voltage Swing Output Low | 0.004 | 0.007 | V | Output Low, No Load | 3 | ||
| Maximum Output Voltage Swing Output Low | 0.033 | 0.05 | V | Output Low, ISINK = 1mA | 3 | ||
| Maximum Output Voltage Swing Output Low | 0.475 | 0.62 | V | Output Low, ISINK = 20mA | 3 | ||
| Maximum Output Current | IO | 30 | 50 | mA | Note 10 | 3 | |
| Supply Current per Amplifier | IS | 2.7 | 3.8 | mA | VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C | 3 | |
| Supply Current per Amplifier | IS | 2.9 | 4 | mA | VS = 5V, 0°C ≤ TA ≤ 70°C | 4 | |
| Minimum Supply Voltage | 2.2 | 2.5 | V | Single Supply, VCM = 0V | 3 | ||
| Input Voltage Range | 3.5 | 3.8 | V | VS = 5V, TA = 25°C | 3 | ||
| Input Offset Voltage | VOS | 150 | 550 | µV | VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C | 5 | |
| Input Offset Current | IOS | 5 | 40 | nA | VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C | 5 | |
| Input Bias Current | IB | 90 | 190 | nA | VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C | 5 | |
| Input Voltage Range | 13.5 | 13.8 | V | VS = ±15V, TA = 25°C | 5 | ||
| Large-Signal Voltage Gain | AVOL | 1200 | 4000 | V/mV | VS = ±15V, VO = 0V to ±10V, RL = 2k | 5 | |
| Maximum Output Voltage Swing Output High | 13.7 | 13.9 | V | Output High, ISOURCE = 20mA, VS = ±15V | 5 | ||
| Common Mode Rejection Ratio | CMRR | 86 | 107 | dB | VS = ±15V, VCM = -15V to 13.5V | 5 | |
| Power Supply Rejection Ratio | PSRR | 90 | 116 | dB | VS = ±2V to ±18V | 5 | |
| Supply Current per Amplifier | IS | 3.4 | 4.7 | mA | VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C | 5 | |
| Input Offset Voltage | VOS | 150 | 375 | µV | VS = 3.3V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C | 7 | |
| Input Voltage Range | 1.7 | 1.8 | V | VS = 3.3V, TA = 25°C | 7 | ||
| Maximum Output Voltage Swing Output High | 2.4 | 2.55 | V | VS = 3.3V, Output High, ISOURCE = 1mA | 7 | ||
| Maximum Output Voltage Swing Output High | 2.14 | 2.26 | V | VS = 3.3V, Output High, ISOURCE = 15mA | 7 | ||
| Maximum Output Voltage Swing Output Low | 0.005 | 0.008 | V | VS = 3.3V, Output Low, No Load | 7 | ||
| Maximum Output Voltage Swing Output Low | 0.037 | 0.055 | V | VS = 3.3V, Output Low, ISINK = 1mA | 7 | ||
| Maximum Output Voltage Swing Output Low | 0.4 | 0.53 | V | VS = 3.3V, Output Low, ISINK = 15mA | 7 | ||
| Total Supply Voltage (V+ to V-) | 36 | V | V+ to V- | 2 | |||
| Input Current | -15 | 15 | mA | 2 | |||
| Operating Temperature Range LT1213C | -40 | 85 | °C | LT1213C/LT1214C | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | Plastic Package (N8, S8, N, S) | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 150 | °C/W | S8 package, junction-to-ambient, still air | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE (1.143, 1.651) OR TIN PLATE LEADS | 16 |
CAD (KiCad official)
- Symbol:
LT1213CS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1213cs8-pbf-etched.step/lt1213cs8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1213cs8-pbf.step/lt1213cs8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
432f86f45cf354e0, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).