LT1213CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT A	output	Output of amplifier A; it swings to within 4mV of the negative supply with no load and the minimum output drive is 30mA.
2	-IN A	input	Inverting input of amplifier A; input currents are less than 200nA and the inputs can be driven beyond the supplies without damage or phase reversal.
3	+IN A	input	Non-inverting input of amplifier A; the input voltage range includes ground (V-) and inputs can be driven beyond the supplies without damage or phase reversal.
4	V-	power_in	Negative supply pin; the total supply (V+ to V-) must be greater than 2.5V and less than 36V.
5	+IN B	input	Non-inverting input of amplifier B; the input voltage range includes ground (V-) and inputs can be driven beyond the supplies without damage or phase reversal.
6	-IN B	input	Inverting input of amplifier B; input currents are less than 200nA and the inputs can be driven beyond the supplies without damage or phase reversal.
7	OUT B	output	Output of amplifier B; it swings to within 4mV of the negative supply with no load and the minimum output drive is 30mA.
8	V+	power_in	Positive supply pin; the total supply (V+ to V-) must be greater than 2.5V and less than 36V, and should be bypassed with about 0.01µF within an inch of the pin.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SO-8
Category	Interface ICs
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Offset Voltage	VOS		100	275	µV	VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C	3
Input Offset Current	IOS		5	40	nA	VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C	3
Input Bias Current	IB		100	200	nA	VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C	3
Input Offset Voltage	VOS		150	375	µV	VS = 5V, VCM = 0.5V, VOUT = 0.5V, 0°C ≤ TA ≤ 70°C	4
Input Offset Voltage	VOS		175	500	µV	VS = 5V, VCM = 0.5V, VOUT = 0.5V, -40°C ≤ TA ≤ 85°C	4
Input Bias Current	IB		110	230	nA	VS = 5V, VCM = 0.5V, VOUT = 0.5V, 0°C ≤ TA ≤ 70°C	4
Input Bias Current	IB		120	250	nA	VS = 5V, VCM = 0.5V, VOUT = 0.5V, -40°C ≤ TA ≤ 85°C	4
Common Mode Rejection Ratio	CMRR	86	105		dB	VCM = 0V to 3.5V	3
Power Supply Rejection Ratio	PSRR	90	116		dB	VS = 2.5V to 12.5V	3
Large-Signal Voltage Gain	AVOL	250	850		V/mV	VO = 0.05V to 3.7V, RL = 500Ω	3
Maximum Output Voltage Swing Output High		4.3	4.39		V	Output High, No Load	3
Maximum Output Voltage Swing Output High		4.2	4.3		V	Output High, ISOURCE = 1mA	3
Maximum Output Voltage Swing Output High		3.8	3.92		V	Output High, ISOURCE = 20mA	3
Maximum Output Voltage Swing Output Low			0.004	0.007	V	Output Low, No Load	3
Maximum Output Voltage Swing Output Low			0.033	0.05	V	Output Low, ISINK = 1mA	3
Maximum Output Voltage Swing Output Low			0.475	0.62	V	Output Low, ISINK = 20mA	3
Maximum Output Current	IO	30	50		mA	Note 10	3
Supply Current per Amplifier	IS		2.7	3.8	mA	VS = 5V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C	3
Supply Current per Amplifier	IS		2.9	4	mA	VS = 5V, 0°C ≤ TA ≤ 70°C	4
Minimum Supply Voltage		2.2	2.5		V	Single Supply, VCM = 0V	3
Input Voltage Range		3.5	3.8		V	VS = 5V, TA = 25°C	3
Input Offset Voltage	VOS		150	550	µV	VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C	5
Input Offset Current	IOS		5	40	nA	VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C	5
Input Bias Current	IB		90	190	nA	VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C	5
Input Voltage Range		13.5	13.8		V	VS = ±15V, TA = 25°C	5
Large-Signal Voltage Gain	AVOL	1200	4000		V/mV	VS = ±15V, VO = 0V to ±10V, RL = 2k	5
Maximum Output Voltage Swing Output High		13.7	13.9		V	Output High, ISOURCE = 20mA, VS = ±15V	5
Common Mode Rejection Ratio	CMRR	86	107		dB	VS = ±15V, VCM = -15V to 13.5V	5
Power Supply Rejection Ratio	PSRR	90	116		dB	VS = ±2V to ±18V	5
Supply Current per Amplifier	IS		3.4	4.7	mA	VS = ±15V, VCM = 0V, VOUT = 0V, TA = 25°C	5
Input Offset Voltage	VOS		150	375	µV	VS = 3.3V, VCM = 0.5V, VOUT = 0.5V, TA = 25°C	7
Input Voltage Range		1.7	1.8		V	VS = 3.3V, TA = 25°C	7
Maximum Output Voltage Swing Output High		2.4	2.55		V	VS = 3.3V, Output High, ISOURCE = 1mA	7
Maximum Output Voltage Swing Output High		2.14	2.26		V	VS = 3.3V, Output High, ISOURCE = 15mA	7
Maximum Output Voltage Swing Output Low			0.005	0.008	V	VS = 3.3V, Output Low, No Load	7
Maximum Output Voltage Swing Output Low			0.037	0.055	V	VS = 3.3V, Output Low, ISINK = 1mA	7
Maximum Output Voltage Swing Output Low			0.4	0.53	V	VS = 3.3V, Output Low, ISINK = 15mA	7
Total Supply Voltage (V+ to V-)				36	V	V+ to V-	2
Input Current		-15		15	mA		2
Operating Temperature Range LT1213C		-40		85	°C	LT1213C/LT1214C	2
Storage Temperature Range		-65		150	°C		2
Junction Temperature				150	°C	Plastic Package (N8, S8, N, S)	2
Lead Temperature				300	°C	Soldering, 10 sec	2
Thermal Resistance Junction-to-Ambient	θJA		150		°C/W	S8 package, junction-to-ambient, still air	2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
contacts		tin	NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE (1.143, 1.651) OR TIN PLATE LEADS	16

CAD (KiCad official)

Symbol: LT1213CS8#PBF
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SO-8 (KiCad packages3D, STEP)
3D model files: lt1213cs8-pbf-etched.step / lt1213cs8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1213cs8-pbf.step / lt1213cs8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (20 pp, sha256 432f86f45cf354e0, retrieved 2026-11-02, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT1213CS8#PBF

Verified LT1213CS8#PBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README