LT1175IS8#PBF

{
  "slug": "lt1175is8-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt1175is8#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt1175is8-pbf.kicad_sym",
    "lt1175is8-pbf.kicad_mod",
    "lt1175is8-pbf.glb",
    "lt1175is8-pbf.step",
    "lt1175is8-pbf.lbr",
    "docs/hero.png",
    "docs/lt1175is8-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt1175is8-pbf-hero.glb",
    "lt1175is8-pbf-hero.overlay.json",
    "lt1175is8-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT1175IS8#PBF",
    "manufacturer": "Analog Devices",
    "package": "SO-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589785313972690944",
    "parts": {
      "symbol": "lt1175is8-pbf.kicad_sym",
      "footprint": "lt1175is8-pbf.kicad_mod",
      "model_3d": "lt1175is8-pbf-hero.glb",
      "model_3d_plain": "lt1175is8-pbf-etched.glb",
      "model_3d_step": "lt1175is8-pbf-etched.step",
      "model_3d_step_plain": "lt1175is8-pbf.step",
      "lbr": "lt1175is8-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C462692",
      "digikey": "LT1175IS8#PBF-ND",
      "mouser": "584-LT1175IS8#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T06:22:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT1175IS8#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT1175IS8#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Supplies power to the regulator and needs a bypass capacitor if the device is more than six inches from the main filter capacitor, with a 1µF or larger tantalum suggested. Pins 1 and 8 are internally tied to the die attach paddle, so electrical contact can be made to either pin."
      },
      {
        "number": "2",
        "name": "ILIM2",
        "type": "passive",
        "description": "Emitter section of the power transistor used to set current limit; when left open it floats several hundred millivolts above the negative input, and it must connect only to the input voltage, directly or through a resistor, where shorting it to the input raises current limit by at least 200mA."
      },
      {
        "number": "3",
        "name": "OUTPUT",
        "type": "power_out",
        "description": "Collector of the NPN power transistor, which can be forced to the input voltage, to ground, or up to 2V positive with respect to ground without damage or latchup."
      },
      {
        "number": "4",
        "name": "SENSE",
        "type": "input",
        "description": "Adjustable version: feedback input set by an external divider to generate 3.8V, with about 75nA flowing out of the pin and a maximum forced voltage of 2V and -10V with respect to GND; fixed 5V version: Kelvin sense connection with about 12µA bias current flowing out of the pin."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin that carries the quiescent current of 45µA at zero load, increasing by about 10µA per mA of output current (about 5mA at 500mA output), with current flowing into the pin."
      },
      {
        "number": "6",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown control that turns the regulator on when forced 2V above or below GND and works with either positive or negative logic; left open it defaults to the on state, and the absolute maximum is 13.5V and -20V with respect to GND and 30V and -5V with respect to VIN per the Absolute Maximum Ratings."
      },
      {
        "number": "7",
        "name": "ILIM4",
        "type": "passive",
        "description": "Emitter section of the power transistor used to set current limit; when left open it floats several hundred millivolts above the negative input, and it must connect only to the input voltage, directly or through a resistor, where shorting it to the input raises current limit by at least 400mA."
      },
      {
        "number": "8",
        "name": "VIN",
        "type": "power_in",
        "description": "Supplies power to the regulator and needs a bypass capacitor if the device is more than six inches from the main filter capacitor, with a 1µF or larger tantalum suggested. Pins 1 and 8 are internally tied to the die attach paddle, so electrical contact can be made to either pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: SHDN voltage limits conflict within the datasheet: Absolute Maximum Ratings (page 2) give 13.5V/-20V; The datasheet does not assign an ERC class to the ILIM pins; they are emitter sections of the power ; SENSE behaves differently in the adjustable (LT1175) and fixed 5V (LT1175-5) versions; the descripti"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0756,
        "at": "2026-10-18T06:19:12"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589785313972690944",
        "pages": 20,
        "sha256": "282a09ccf76133bb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt1175is8-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt1175is8-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "aa624d64bf50d58c4e60324d8829530b5084f861edb85fc60a2f6bff74fd1881",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}