main
Ray
Publish 0.1.0
c9421c6
LT1019CS8-2.5#PBF
Analog Devices · Voltage References · SO-8
LT1019CS8-2.5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Internally connected pin; do not connect externally. |
| 2 | INPUT | power_in | Supply input; absolute maximum input voltage is 40V and minimum input/output differential is less than 1V in series mode. |
| 3 | TEMP | output | Proportional-to-absolute-temperature output with slope of approximately 2.1mV/°C and absolute voltage limit of 5V; loading changes reference output by less than 0.05%/µA. |
| 4 | GND | power_in | Ground reference pin for the reference. |
| 5 | TRIM | passive | Output trim pin; a potentiometer from output to ground has its wiper tied here, with trim pin voltage limited to ±30V. |
| 6 | OUTPUT | power_out | Reference voltage output that can both sink and source up to 10mA. |
| 7 | DNC | unconnected | Internally connected pin; do not connect externally. |
| 8 | DNC | unconnected | Internally connected pin; do not connect externally. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Tolerance | 0.02 | 0.2 | % | TA = 25°C, VIN = 15V, IOUT = 0 | 3 | ||
| TC Output Voltage Temperature Coefficient LT1019C | TC | 5 | 20 | ppm/°C | LT1019C (0°C to 70°C) | 3 | |
| Line Regulation | ΔVOUT | 0.5 | 3 | ppm/V | (VOUT + 1.5V) ≤ VIN ≤ 40V | 3 | |
| Line Regulation (full temperature range) | ΔVIN | 1 | 5 | ppm/V | Full operating temperature range (●) | 3 | |
| Ripple Rejection | RR | 90 | 110 | dB | 50Hz ≤ f ≤ 400Hz | 3 | |
| Ripple Rejection (full temperature range) | RR | 84 | dB | 50Hz ≤ f ≤ 400Hz, full operating temperature range (●) | 3 | ||
| Load Regulation Series Mode | ΔVOUT/ΔIOUT | 0.02 | 0.05 | mV/mA (Ω) | 0 ≤ IOUT ≤ 10mA | 4 | |
| Load Regulation Series Mode (full temperature range) | ΔVOUT/ΔIOUT | 0.08 | mV/mA (Ω) | 0 ≤ IOUT ≤ 10mA, full operating temperature range (●) | 4 | ||
| Load Regulation Shunt Mode 2.5V | ΔVOUT/ΔISHUNT | 0.1 | 0.4 | mV/mA (Ω) | 1mA ≤ ISHUNT ≤ 10mA, full operating temperature range (●) | 4 | |
| Thermal Regulation | 0.1 | 0.5 | ppm/mW | ΔP = 200mW, t = 50ms | 4 | ||
| Quiescent Current | IQ | 0.65 | 1.2 | mA | 4 | ||
| Quiescent Current Series Mode | IQ | 1.3 | 1.5 | mA | Series Mode, full operating temperature range (●) | 4 | |
| Minimum Shunt Current | 0.5 | 0.8 | mA | Full operating temperature range (●) | 4 | ||
| Minimum Input/Output Voltage Differential | 0.9 | 1.1 | V | IOUT ≤ 1mA, full operating temperature range (●) | 4 | ||
| Minimum Input/Output Voltage Differential | 1.3 | V | IOUT = 10mA, full operating temperature range (●) | 4 | |||
| Trim Range LT1019-2.5 | -6 | 6 | % | 4 | |||
| Short-Circuit Current | ISC | 15 | 25 | 50 | mA | 2V ≤ VIN ≤ 35V | 4 |
| Short-Circuit Current Output Connected to GND | ISC | 10 | mA | Output connected to GND, full operating temperature range (●) | 4 | ||
| Output Voltage Noise | en | 2.5 | 4 | ppm (RMS) | 10Hz ≤ f ≤ 1kHz | 4 | |
| Output Voltage Noise | en | 2.5 | ppm (P-P) | 0.1Hz ≤ f ≤ 10Hz | 4 | ||
| Input Voltage | VIN | 40 | V | 2 | |||
| Output Voltage LT1019-2.5 | VOUT | 7 | V | LT1019-2.5 (Note 2) | 2 | ||
| Trim Pin Voltage | -30 | 30 | V | 2 | |||
| Temp Pin Voltage | 5 | V | 2 | ||||
| Storage Temperature Range | TSTG | -65 | 150 | °C | Note 11 | 2 | |
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Specified Temperature Range Commercial | TA | 0 | 70 | °C | Commercial (C grade) | 2 | |
| Thermal Resistance Junction-to-Ambient | θJA | 130 | °C/W | S8 package, TJMAX = 100°C | 2 |
CAD (KiCad official)
- Symbol:
LT1019CS8-2.5#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1019cs8-2-5-pbf-etched.step/lt1019cs8-2-5-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1019cs8-2-5-pbf.step/lt1019cs8-2-5-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
ae02b48310f3b609, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1019CS8-2.5#PBF
**Analog Devices** · Voltage References · SO-8
LT1019CS8-2.5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Internally connected pin; do not connect externally. |
| 2 | INPUT | power_in | Supply input; absolute maximum input voltage is 40V and minimum input/output differential is less than 1V in series mode. |
| 3 | TEMP | output | Proportional-to-absolute-temperature output with slope of approximately 2.1mV/°C and absolute voltage limit of 5V; loading changes reference output by less than 0.05%/µA. |
| 4 | GND | power_in | Ground reference pin for the reference. |
| 5 | TRIM | passive | Output trim pin; a potentiometer from output to ground has its wiper tied here, with trim pin voltage limited to ±30V. |
| 6 | OUTPUT | power_out | Reference voltage output that can both sink and source up to 10mA. |
| 7 | DNC | unconnected | Internally connected pin; do not connect externally. |
| 8 | DNC | unconnected | Internally connected pin; do not connect externally. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Tolerance | | | 0.02 | 0.2 | % | TA = 25°C, VIN = 15V, IOUT = 0 | 3 |
| TC Output Voltage Temperature Coefficient LT1019C | TC | | 5 | 20 | ppm/°C | LT1019C (0°C to 70°C) | 3 |
| Line Regulation | ΔVOUT | | 0.5 | 3 | ppm/V | (VOUT + 1.5V) ≤ VIN ≤ 40V | 3 |
| Line Regulation (full temperature range) | ΔVIN | | 1 | 5 | ppm/V | Full operating temperature range (●) | 3 |
| Ripple Rejection | RR | 90 | 110 | | dB | 50Hz ≤ f ≤ 400Hz | 3 |
| Ripple Rejection (full temperature range) | RR | 84 | | | dB | 50Hz ≤ f ≤ 400Hz, full operating temperature range (●) | 3 |
| Load Regulation Series Mode | ΔVOUT/ΔIOUT | | 0.02 | 0.05 | mV/mA (Ω) | 0 ≤ IOUT ≤ 10mA | 4 |
| Load Regulation Series Mode (full temperature range) | ΔVOUT/ΔIOUT | | | 0.08 | mV/mA (Ω) | 0 ≤ IOUT ≤ 10mA, full operating temperature range (●) | 4 |
| Load Regulation Shunt Mode 2.5V | ΔVOUT/ΔISHUNT | | 0.1 | 0.4 | mV/mA (Ω) | 1mA ≤ ISHUNT ≤ 10mA, full operating temperature range (●) | 4 |
| Thermal Regulation | | | 0.1 | 0.5 | ppm/mW | ΔP = 200mW, t = 50ms | 4 |
| Quiescent Current | IQ | | 0.65 | 1.2 | mA | | 4 |
| Quiescent Current Series Mode | IQ | | 1.3 | 1.5 | mA | Series Mode, full operating temperature range (●) | 4 |
| Minimum Shunt Current | | | 0.5 | 0.8 | mA | Full operating temperature range (●) | 4 |
| Minimum Input/Output Voltage Differential | | | 0.9 | 1.1 | V | IOUT ≤ 1mA, full operating temperature range (●) | 4 |
| Minimum Input/Output Voltage Differential | | | | 1.3 | V | IOUT = 10mA, full operating temperature range (●) | 4 |
| Trim Range LT1019-2.5 | | -6 | | 6 | % | | 4 |
| Short-Circuit Current | ISC | 15 | 25 | 50 | mA | 2V ≤ VIN ≤ 35V | 4 |
| Short-Circuit Current Output Connected to GND | ISC | 10 | | | mA | Output connected to GND, full operating temperature range (●) | 4 |
| Output Voltage Noise | en | | 2.5 | 4 | ppm (RMS) | 10Hz ≤ f ≤ 1kHz | 4 |
| Output Voltage Noise | en | | 2.5 | | ppm (P-P) | 0.1Hz ≤ f ≤ 10Hz | 4 |
| Input Voltage | VIN | | | 40 | V | | 2 |
| Output Voltage LT1019-2.5 | VOUT | | | 7 | V | LT1019-2.5 (Note 2) | 2 |
| Trim Pin Voltage | | -30 | | 30 | V | | 2 |
| Temp Pin Voltage | | | | 5 | V | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | Note 11 | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10 sec | 2 |
| Specified Temperature Range Commercial | TA | 0 | | 70 | °C | Commercial (C grade) | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 130 | | °C/W | S8 package, TJMAX = 100°C | 2 |
## CAD (KiCad official)
- Symbol: `LT1019CS8-2.5#PBF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lt1019cs8-2-5-pbf-etched.step` / `lt1019cs8-2-5-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1019cs8-2-5-pbf.step` / `lt1019cs8-2-5-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/1019fd.pdf) (12 pp, sha256 `ae02b48310f3b609`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1019cs8-2-5-pbf-datasheet.pdf)