Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1019CS8-2.5#PBF

Analog Devices · Voltage References · SO-8

LT1019CS8-2.5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Internally connected pin; do not connect externally.
2 INPUT power_in Supply input; absolute maximum input voltage is 40V and minimum input/output differential is less than 1V in series mode.
3 TEMP output Proportional-to-absolute-temperature output with slope of approximately 2.1mV/°C and absolute voltage limit of 5V; loading changes reference output by less than 0.05%/µA.
4 GND power_in Ground reference pin for the reference.
5 TRIM passive Output trim pin; a potentiometer from output to ground has its wiper tied here, with trim pin voltage limited to ±30V.
6 OUTPUT power_out Reference voltage output that can both sink and source up to 10mA.
7 DNC unconnected Internally connected pin; do not connect externally.
8 DNC unconnected Internally connected pin; do not connect externally.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Tolerance 0.02 0.2 % TA = 25°C, VIN = 15V, IOUT = 0 3
TC Output Voltage Temperature Coefficient LT1019C TC 5 20 ppm/°C LT1019C (0°C to 70°C) 3
Line Regulation ΔVOUT 0.5 3 ppm/V (VOUT + 1.5V) ≤ VIN ≤ 40V 3
Line Regulation (full temperature range) ΔVIN 1 5 ppm/V Full operating temperature range (●) 3
Ripple Rejection RR 90 110 dB 50Hz ≤ f ≤ 400Hz 3
Ripple Rejection (full temperature range) RR 84 dB 50Hz ≤ f ≤ 400Hz, full operating temperature range (●) 3
Load Regulation Series Mode ΔVOUT/ΔIOUT 0.02 0.05 mV/mA (Ω) 0 ≤ IOUT ≤ 10mA 4
Load Regulation Series Mode (full temperature range) ΔVOUT/ΔIOUT 0.08 mV/mA (Ω) 0 ≤ IOUT ≤ 10mA, full operating temperature range (●) 4
Load Regulation Shunt Mode 2.5V ΔVOUT/ΔISHUNT 0.1 0.4 mV/mA (Ω) 1mA ≤ ISHUNT ≤ 10mA, full operating temperature range (●) 4
Thermal Regulation 0.1 0.5 ppm/mW ΔP = 200mW, t = 50ms 4
Quiescent Current IQ 0.65 1.2 mA 4
Quiescent Current Series Mode IQ 1.3 1.5 mA Series Mode, full operating temperature range (●) 4
Minimum Shunt Current 0.5 0.8 mA Full operating temperature range (●) 4
Minimum Input/Output Voltage Differential 0.9 1.1 V IOUT ≤ 1mA, full operating temperature range (●) 4
Minimum Input/Output Voltage Differential 1.3 V IOUT = 10mA, full operating temperature range (●) 4
Trim Range LT1019-2.5 -6 6 % 4
Short-Circuit Current ISC 15 25 50 mA 2V ≤ VIN ≤ 35V 4
Short-Circuit Current Output Connected to GND ISC 10 mA Output connected to GND, full operating temperature range (●) 4
Output Voltage Noise en 2.5 4 ppm (RMS) 10Hz ≤ f ≤ 1kHz 4
Output Voltage Noise en 2.5 ppm (P-P) 0.1Hz ≤ f ≤ 10Hz 4
Input Voltage VIN 40 V 2
Output Voltage LT1019-2.5 VOUT 7 V LT1019-2.5 (Note 2) 2
Trim Pin Voltage -30 30 V 2
Temp Pin Voltage 5 V 2
Storage Temperature Range TSTG -65 150 °C Note 11 2
Lead Temperature 300 °C Soldering, 10 sec 2
Specified Temperature Range Commercial TA 0 70 °C Commercial (C grade) 2
Thermal Resistance Junction-to-Ambient θJA 130 °C/W S8 package, TJMAX = 100°C 2

CAD (KiCad official)

  • Symbol: LT1019CS8-2.5#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1019cs8-2-5-pbf-etched.step / lt1019cs8-2-5-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1019cs8-2-5-pbf.step / lt1019cs8-2-5-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 ae02b48310f3b609, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF