main
Ray
Publish 0.1.0
c85e759
LT1016CS8#PBF
Analog Devices · Comparators · SO-8
LT1016CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply, operated from 5V with electrical specifications applying only up to 5.4V (absolute maximum 7V). |
| 2 | +IN | input | Non-inverting input, with common mode range of -3.75V to 3.5V at ±5V supplies and input current limited to ±10mA. |
| 3 | -IN | input | Inverting input, with common mode range of -3.75V to 3.5V at ±5V supplies and input current limited to ±10mA. |
| 4 | V- | power_in | Negative supply (-5V typical, absolute maximum 7V) drawing only 3mA typical quiescent current, and can be driven from a resistive divider; tie to ground for single 5V operation. |
| 5 | LATCH ENABLE | input | Latch input that retains input data at the outputs when held high (VIH 2.0V min, VIL 0.8V max), floats high when disconnected so it must be grounded for flow-through operation. |
| 6 | GND | power_in | Ground reference pin that must be connected with a very short lead directly to a low-impedance ground plane. |
| 7 | Q OUT | output | TTL/CMOS-compatible complementary output with active drive in both directions, continuous output current up to ±20mA. |
| 8 | Q̅ OUT | output | TTL/CMOS-compatible complementary (inverted) output matched to Q, with active drive in both directions and continuous output current up to ±20mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -3 | 1 | 3 | mV | RS ≤ 100Ω (Note 2) | 3 |
| Input Offset Voltage | VOS | 3.5 | mV | RS ≤ 100Ω (Note 2); ● full operating temperature range | 3 | ||
| Input Offset Current | IOS | 0.3 | 1 | µA | (Note 2) | 3 | |
| Input Offset Current | IOS | 0.3 | 1.3 | µA | (Note 2); ● full operating temperature range | 3 | |
| Input Bias Current | IB | 5 | 10 | µA | (Note 3) | 3 | |
| Input Bias Current | IB | 13 | µA | (Note 3); ● full operating temperature range | 3 | ||
| Input Voltage Range | -3.75 | 3.5 | V | Note 6 | 3 | ||
| Input Voltage Range | 1.25 | 3.5 | V | Single 5V Supply (Note 6) | 3 | ||
| Common Mode Rejection | CMRR | 80 | 96 | dB | -3.75V ≤ VCM ≤ 3.5V; ● full operating temperature range | 3 | |
| Supply Voltage Rejection, Positive Supply (LT1016C) | PSRR | 60 | 75 | dB | Positive Supply 4.6V ≤ V+ ≤ 5.4V; LT1016C; ● full operating temperature range | 3 | |
| Supply Voltage Rejection, Negative Supply | PSRR | 80 | 100 | dB | Negative Supply 2V ≤ V- ≤ 7V; ● full operating temperature range | 3 | |
| Small-Signal Voltage Gain | AV | 1400 | 3000 | V/V | 1V ≤ VOUT ≤ 2V | 3 | |
| Output High Voltage | VOH | 2.7 | 3.4 | V | V+ ≥ 4.6V; IOUT = 1mA; ● full operating temperature range | 3 | |
| Output High Voltage | VOH | 2.4 | 3 | V | V+ ≥ 4.6V; IOUT = 10mA; ● full operating temperature range | 3 | |
| Output Low Voltage | VOL | 0.3 | 0.4 | V | ISINK = 4mA; ● full operating temperature range | 3 | |
| Output Low Voltage | VOL | 0.5 | V | ISINK = 10mA; ● full operating temperature range | 3 | ||
| Positive Supply Current | I+ | 25 | 35 | mA | ● full operating temperature range | 3 | |
| Negative Supply Current | I- | 3 | 5 | mA | ● full operating temperature range | 3 | |
| LATCH Pin Hi Input Voltage | VIH | 2 | V | ● full operating temperature range | 3 | ||
| LATCH Pin Lo Input Voltage | VIL | 0.8 | V | ● full operating temperature range | 3 | ||
| LATCH Pin Current | IIL | 500 | µA | VLATCH = 0V; ● full operating temperature range | 3 | ||
| Propagation Delay | tPD | 10 | 14 | ns | ∆VIN = 100mV, OD = 5mV (Note 4) | 3 | |
| Propagation Delay | tPD | 16 | ns | ∆VIN = 100mV, OD = 5mV (Note 4); ● full operating temperature range | 3 | ||
| Propagation Delay | tPD | 9 | 12 | ns | ∆VIN = 100mV, OD = 20mV (Note 4) | 3 | |
| Propagation Delay | tPD | 15 | ns | ∆VIN = 100mV, OD = 20mV (Note 4); ● full operating temperature range | 3 | ||
| Positive Supply Voltage | 7 | V | Note 5 | 2 | |||
| Negative Supply Voltage | 7 | V | 2 | ||||
| Differential Input Voltage | -5 | 5 | V | Note 7 | 2 | ||
| +IN, -IN and LATCH ENABLE Current | -10 | 10 | mA | Note 7 | 2 | ||
| Output Current (Continuous) | -20 | 20 | mA | Note 7; continuous | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Temperature Range (LT1016C) | 0 | 70 | °C | LT1016C | 2 | ||
| Maximum Junction Temperature (S8 package) | TJMAX | 110 | °C | 8-Lead Plastic SO (S8 package) | 2 | ||
| Thermal Resistance, Junction to Ambient (S8 package) | θJA | 120 | °C/W | 8-Lead Plastic SO (S8 package) | 2 |
CAD (KiCad official)
- Symbol:
LT1016CS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1016cs8-etched.step/lt1016cs8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1016cs8.step/lt1016cs8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
262b5285374c4b7d, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1016CS8#PBF
**Analog Devices** · Comparators · SO-8
LT1016CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply, operated from 5V with electrical specifications applying only up to 5.4V (absolute maximum 7V). |
| 2 | +IN | input | Non-inverting input, with common mode range of -3.75V to 3.5V at ±5V supplies and input current limited to ±10mA. |
| 3 | -IN | input | Inverting input, with common mode range of -3.75V to 3.5V at ±5V supplies and input current limited to ±10mA. |
| 4 | V- | power_in | Negative supply (-5V typical, absolute maximum 7V) drawing only 3mA typical quiescent current, and can be driven from a resistive divider; tie to ground for single 5V operation. |
| 5 | LATCH ENABLE | input | Latch input that retains input data at the outputs when held high (VIH 2.0V min, VIL 0.8V max), floats high when disconnected so it must be grounded for flow-through operation. |
| 6 | GND | power_in | Ground reference pin that must be connected with a very short lead directly to a low-impedance ground plane. |
| 7 | Q OUT | output | TTL/CMOS-compatible complementary output with active drive in both directions, continuous output current up to ±20mA. |
| 8 | Q̅ OUT | output | TTL/CMOS-compatible complementary (inverted) output matched to Q, with active drive in both directions and continuous output current up to ±20mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Amplifiers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -3 | 1 | 3 | mV | RS ≤ 100Ω (Note 2) | 3 |
| Input Offset Voltage | VOS | | | 3.5 | mV | RS ≤ 100Ω (Note 2); ● full operating temperature range | 3 |
| Input Offset Current | IOS | | 0.3 | 1 | µA | (Note 2) | 3 |
| Input Offset Current | IOS | | 0.3 | 1.3 | µA | (Note 2); ● full operating temperature range | 3 |
| Input Bias Current | IB | | 5 | 10 | µA | (Note 3) | 3 |
| Input Bias Current | IB | | | 13 | µA | (Note 3); ● full operating temperature range | 3 |
| Input Voltage Range | | -3.75 | | 3.5 | V | Note 6 | 3 |
| Input Voltage Range | | 1.25 | | 3.5 | V | Single 5V Supply (Note 6) | 3 |
| Common Mode Rejection | CMRR | 80 | 96 | | dB | -3.75V ≤ VCM ≤ 3.5V; ● full operating temperature range | 3 |
| Supply Voltage Rejection, Positive Supply (LT1016C) | PSRR | 60 | 75 | | dB | Positive Supply 4.6V ≤ V+ ≤ 5.4V; LT1016C; ● full operating temperature range | 3 |
| Supply Voltage Rejection, Negative Supply | PSRR | 80 | 100 | | dB | Negative Supply 2V ≤ V- ≤ 7V; ● full operating temperature range | 3 |
| Small-Signal Voltage Gain | AV | 1400 | 3000 | | V/V | 1V ≤ VOUT ≤ 2V | 3 |
| Output High Voltage | VOH | 2.7 | 3.4 | | V | V+ ≥ 4.6V; IOUT = 1mA; ● full operating temperature range | 3 |
| Output High Voltage | VOH | 2.4 | 3 | | V | V+ ≥ 4.6V; IOUT = 10mA; ● full operating temperature range | 3 |
| Output Low Voltage | VOL | | 0.3 | 0.4 | V | ISINK = 4mA; ● full operating temperature range | 3 |
| Output Low Voltage | VOL | | | 0.5 | V | ISINK = 10mA; ● full operating temperature range | 3 |
| Positive Supply Current | I+ | | 25 | 35 | mA | ● full operating temperature range | 3 |
| Negative Supply Current | I- | | 3 | 5 | mA | ● full operating temperature range | 3 |
| LATCH Pin Hi Input Voltage | VIH | 2 | | | V | ● full operating temperature range | 3 |
| LATCH Pin Lo Input Voltage | VIL | | | 0.8 | V | ● full operating temperature range | 3 |
| LATCH Pin Current | IIL | | | 500 | µA | VLATCH = 0V; ● full operating temperature range | 3 |
| Propagation Delay | tPD | | 10 | 14 | ns | ∆VIN = 100mV, OD = 5mV (Note 4) | 3 |
| Propagation Delay | tPD | | | 16 | ns | ∆VIN = 100mV, OD = 5mV (Note 4); ● full operating temperature range | 3 |
| Propagation Delay | tPD | | 9 | 12 | ns | ∆VIN = 100mV, OD = 20mV (Note 4) | 3 |
| Propagation Delay | tPD | | | 15 | ns | ∆VIN = 100mV, OD = 20mV (Note 4); ● full operating temperature range | 3 |
| Positive Supply Voltage | | | | 7 | V | Note 5 | 2 |
| Negative Supply Voltage | | | | 7 | V | | 2 |
| Differential Input Voltage | | -5 | | 5 | V | Note 7 | 2 |
| +IN, -IN and LATCH ENABLE Current | | -10 | | 10 | mA | Note 7 | 2 |
| Output Current (Continuous) | | -20 | | 20 | mA | Note 7; continuous | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Operating Temperature Range (LT1016C) | | 0 | | 70 | °C | LT1016C | 2 |
| Maximum Junction Temperature (S8 package) | TJMAX | | | 110 | °C | 8-Lead Plastic SO (S8 package) | 2 |
| Thermal Resistance, Junction to Ambient (S8 package) | θJA | | 120 | | °C/W | 8-Lead Plastic SO (S8 package) | 2 |
## CAD (KiCad official)
- Symbol: `LT1016CS8#PBF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lt1016cs8-etched.step` / `lt1016cs8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1016cs8.step` / `lt1016cs8.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt1016.pdf) (22 pp, sha256 `262b5285374c4b7d`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1016cs8-datasheet.pdf)