main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt1016cs8: viewers rendered from the public page · Ray
lt1016cs8-etched.glb Publish 0.1.0 · Ray
lt1016cs8-etched.step lt1016cs8: factory component page (tier=mfr) · Ray
lt1016cs8-hero.glb lt1016cs8: hero GLB from the etched model (keeps the MPN mark) · Ray
lt1016cs8-hero.overlay.json Publish 0.1.0 · Ray
lt1016cs8.glb Publish 0.1.0 · Ray
lt1016cs8.kicad_mod Publish 0.1.0 · Ray
lt1016cs8.kicad_sym Publish 0.1.0 · Ray
lt1016cs8.lbr Publish 0.1.0 · Ray
lt1016cs8.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LT1016CS8#PBF

Analog Devices · Comparators · SO-8

LT1016CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V+ power_in Positive supply, operated from 5V with electrical specifications applying only up to 5.4V (absolute maximum 7V).
2 +IN input Non-inverting input, with common mode range of -3.75V to 3.5V at ±5V supplies and input current limited to ±10mA.
3 -IN input Inverting input, with common mode range of -3.75V to 3.5V at ±5V supplies and input current limited to ±10mA.
4 V- power_in Negative supply (-5V typical, absolute maximum 7V) drawing only 3mA typical quiescent current, and can be driven from a resistive divider; tie to ground for single 5V operation.
5 LATCH ENABLE input Latch input that retains input data at the outputs when held high (VIH 2.0V min, VIL 0.8V max), floats high when disconnected so it must be grounded for flow-through operation.
6 GND power_in Ground reference pin that must be connected with a very short lead directly to a low-impedance ground plane.
7 Q OUT output TTL/CMOS-compatible complementary output with active drive in both directions, continuous output current up to ±20mA.
8 Q̅ OUT output TTL/CMOS-compatible complementary (inverted) output matched to Q, with active drive in both directions and continuous output current up to ±20mA.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -3 1 3 mV RS ≤ 100Ω (Note 2) 3
Input Offset Voltage VOS 3.5 mV RS ≤ 100Ω (Note 2); ● full operating temperature range 3
Input Offset Current IOS 0.3 1 µA (Note 2) 3
Input Offset Current IOS 0.3 1.3 µA (Note 2); ● full operating temperature range 3
Input Bias Current IB 5 10 µA (Note 3) 3
Input Bias Current IB 13 µA (Note 3); ● full operating temperature range 3
Input Voltage Range -3.75 3.5 V Note 6 3
Input Voltage Range 1.25 3.5 V Single 5V Supply (Note 6) 3
Common Mode Rejection CMRR 80 96 dB -3.75V ≤ VCM ≤ 3.5V; ● full operating temperature range 3
Supply Voltage Rejection, Positive Supply (LT1016C) PSRR 60 75 dB Positive Supply 4.6V ≤ V+ ≤ 5.4V; LT1016C; ● full operating temperature range 3
Supply Voltage Rejection, Negative Supply PSRR 80 100 dB Negative Supply 2V ≤ V- ≤ 7V; ● full operating temperature range 3
Small-Signal Voltage Gain AV 1400 3000 V/V 1V ≤ VOUT ≤ 2V 3
Output High Voltage VOH 2.7 3.4 V V+ ≥ 4.6V; IOUT = 1mA; ● full operating temperature range 3
Output High Voltage VOH 2.4 3 V V+ ≥ 4.6V; IOUT = 10mA; ● full operating temperature range 3
Output Low Voltage VOL 0.3 0.4 V ISINK = 4mA; ● full operating temperature range 3
Output Low Voltage VOL 0.5 V ISINK = 10mA; ● full operating temperature range 3
Positive Supply Current I+ 25 35 mA ● full operating temperature range 3
Negative Supply Current I- 3 5 mA ● full operating temperature range 3
LATCH Pin Hi Input Voltage VIH 2 V ● full operating temperature range 3
LATCH Pin Lo Input Voltage VIL 0.8 V ● full operating temperature range 3
LATCH Pin Current IIL 500 µA VLATCH = 0V; ● full operating temperature range 3
Propagation Delay tPD 10 14 ns ∆VIN = 100mV, OD = 5mV (Note 4) 3
Propagation Delay tPD 16 ns ∆VIN = 100mV, OD = 5mV (Note 4); ● full operating temperature range 3
Propagation Delay tPD 9 12 ns ∆VIN = 100mV, OD = 20mV (Note 4) 3
Propagation Delay tPD 15 ns ∆VIN = 100mV, OD = 20mV (Note 4); ● full operating temperature range 3
Positive Supply Voltage 7 V Note 5 2
Negative Supply Voltage 7 V 2
Differential Input Voltage -5 5 V Note 7 2
+IN, -IN and LATCH ENABLE Current -10 10 mA Note 7 2
Output Current (Continuous) -20 20 mA Note 7; continuous 2
Storage Temperature Range -65 150 °C 2
Operating Temperature Range (LT1016C) 0 70 °C LT1016C 2
Maximum Junction Temperature (S8 package) TJMAX 110 °C 8-Lead Plastic SO (S8 package) 2
Thermal Resistance, Junction to Ambient (S8 package) θJA 120 °C/W 8-Lead Plastic SO (S8 package) 2

CAD (KiCad official)

  • Symbol: LT1016CS8#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1016cs8-etched.step / lt1016cs8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1016cs8.step / lt1016cs8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 262b5285374c4b7d, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF