# LT1013CP

**Texas Instruments** · Precision Op Amps · DIP-8

LT1013CP from Texas Instruments, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output for channel 1; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C. |
| 2 | 1IN- | input | Inverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |
| 3 | 1IN+ | input | Noninverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |
| 4 | VCC- | power_in | Negative supply voltage; the device is specified for supply voltage VCC+ - VCC- of 5 V to 30 V recommended, and can operate from a single 5-V supply or dual ±15-V supplies. |
| 5 | 2IN+ | input | Noninverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |
| 6 | 2IN- | input | Inverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |
| 7 | 2OUT | output | Output for channel 2; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C. |
| 8 | VCC+ | power_in | Positive supply voltage; the absolute maximum supply voltage VCC+ - VCC- is 44 V, and the recommended range is 5 V to 30 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | DIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |

## CAD (KiCad official)

- Symbol: `LT1013CP`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `lt1013cp-etched.step` / `lt1013cp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1013cp.step` / `lt1013cp.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lt1013) (38 pp, sha256 `2d0a7a135db528c5`, retrieved 2026-10-07, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/lt1013cp-datasheet.pdf)