component
LT1013CP
Public Made by Adomby adom
Texas Instruments Precision Op Amps, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# LT1013CP++**Texas Instruments** · Precision Op Amps · DIP-8++LT1013CP from Texas Instruments, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1OUT | output | Output for channel 1; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C. |+| 2 | 1IN- | input | Inverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |+| 3 | 1IN+ | input | Noninverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |+| 4 | VCC- | power_in | Negative supply voltage; the device is specified for supply voltage VCC+ - VCC- of 5 V to 30 V recommended, and can operate from a single 5-V supply or dual ±15-V supplies. |+| 5 | 2IN+ | input | Noninverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |+| 6 | 2IN- | input | Inverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V. |+| 7 | 2OUT | output | Output for channel 2; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C. |+| 8 | VCC+ | power_in | Positive supply voltage; the absolute maximum supply voltage VCC+ - VCC- is 44 V, and the recommended range is 5 V to 30 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | DIP-8 |+| Category | Amplifiers/Comparators |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `LT1013CP`+- Footprint: `Package_DIP:DIP-8_W7.62mm`+- 3D model: DIP-8 (KiCad packages3D, STEP)+- 3D model files: `lt1013cp-etched.step` / `lt1013cp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1013cp.step` / `lt1013cp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lt1013) (38 pp, sha256 `2d0a7a135db528c5`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lt1013cp-datasheet.pdf)
page.jsonadded+199@@ -0,0 +1,199 @@+{+ "slug": "lt1013cp",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Precision Op Amps, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "lt1013cp",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lt1013cp.kicad_sym",+ "lt1013cp.kicad_mod",+ "lt1013cp.glb",+ "lt1013cp.step",+ "lt1013cp.lbr",+ "docs/hero.png",+ "docs/lt1013cp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lt1013cp-hero.glb",+ "lt1013cp-hero.overlay.json"+ ],+ "component": {+ "mpn": "LT1013CP",+ "manufacturer": "Texas Instruments",+ "package": "DIP-8",+ "pin_count": 8,+ "category": "Amplifiers/Comparators",+ "subcategory": "Precision Op Amps",+ "datasheet": "https://www.ti.com/cn/lit/gpn/lt1013",+ "parts": {+ "symbol": "lt1013cp.kicad_sym",+ "footprint": "lt1013cp.kicad_mod",+ "model_3d": "lt1013cp-hero.glb",+ "model_3d_plain": "lt1013cp.glb",+ "model_3d_step": "lt1013cp-etched.step",+ "model_3d_step_plain": "lt1013cp.step",+ "lbr": "lt1013cp.lbr"+ },+ "distributor_links": {+ "lcsc": "C50523",+ "digikey": "296-1399-5-ND",+ "mouser": "595-LT1013CP"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T23:03:58Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-1399-5-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-LT1013CP",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "1OUT",+ "type": "output",+ "description": "Output for channel 1; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C."+ },+ {+ "number": "2",+ "name": "1IN–",+ "type": "input",+ "description": "Inverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."+ },+ {+ "number": "3",+ "name": "1IN+",+ "type": "input",+ "description": "Noninverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."+ },+ {+ "number": "4",+ "name": "VCC–",+ "type": "power_in",+ "description": "Negative supply voltage; the device is specified for supply voltage VCC+ - VCC- of 5 V to 30 V recommended, and can operate from a single 5-V supply or dual ±15-V supplies."+ },+ {+ "number": "5",+ "name": "2IN+",+ "type": "input",+ "description": "Noninverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."+ },+ {+ "number": "6",+ "name": "2IN–",+ "type": "input",+ "description": "Inverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."+ },+ {+ "number": "7",+ "name": "2OUT",+ "type": "output",+ "description": "Output for channel 2; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C."+ },+ {+ "number": "8",+ "name": "VCC+",+ "type": "power_in",+ "description": "Positive supply voltage; the absolute maximum supply voltage VCC+ - VCC- is 44 V, and the recommended range is 5 V to 30 V."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet's pin function table gives no electrical type for the supply pins (shown as '—'). VCC+; The pin-number mapping comes from the 'LT1013 and LT1013D P Package, 8-Pin CDIP or PDIP' top view an"+ ],+ "pages_sent": 9,+ "cost_usd": 0.0579,+ "at": "2026-10-07T23:03:43"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/lt1013",+ "pages": 38,+ "sha256": "2d0a7a135db528c5",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "lt1013cp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "lt1013cp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 7.874,+ 9.27,+ 6.98+ ],+ "zmin_mm": -3.3,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "045ecc860a94730c42778333db38529cd2b7aca6f13394ae9e3e8e7b97459731",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}